Journal articles | Conference publications
@Article{Knechtelsdorfer2025,
author = {Knechtelsdorfer, U. and Baumann, M.S. and Steinboeck, A. and Kugi, A.},
journaltitle = {Journal of Process Control},
title = {On model predictive control of the lateral strip motion in tandem hot rolling mills},
doi = {10.1016/j.jprocont.2025.103463},
pages = {103463},
volume = {152},
journal = {Journal of Process Control},
year = {2025},
}
@Article{Niederer2025,
author = {Niederer, M. and Zeman, P. and Sannes, S. and Seyrkammer, H. and Helekal, G. and Kugi, A. and Steinboeck, A.},
title = {Nonlinear model predictive temperature control of a cooling process for steel strips undergoing phase transformations},
doi = {10.1016/j.conengprac.2025.106512},
issn = {0967-0661},
pages = {106512},
volume = {165},
journal = {Control Engineering Practice},
year = {2025},
}
@Article{Jadachowski2025a,
author = {Jadachowski, Lukas and Kugi, Andreas and Steinboeck, Andreas},
journaltitle = {IEEE Transactions on Industry Applications},
title = {Induction Heating System as a Soft-Sensor for the B-H Curve of Steel Strips in a Continuous Induction Furnace},
doi = {10.1109/TIA.2025.3601113},
issn = {1939-9367},
pages = {1--10},
journal = {IEEE Transactions on Industry Applications},
publisher = {Institute of Electrical and Electronics Engineers (IEEE)},
year = {2025},
}
@Article{Reyhani2024,
author = {Reyhani, M. and Marko, L. and Janisch, G. and Kugi, A.},
journaltitle = {Mechatronics},
title = {Real-time observer designs for elastic-joint industrial robots: Experimental comparison and new strategies},
doi = {10.1016/j.mechatronics.2024.103140},
pages = {103140},
volume = {99},
journal = {Mechatronics},
year = {2024},
}
@Article{Niederer2024,
author = {Niederer, M. and Zeman, P. and Sannes, S. and Seyrkammer, H. and Helekal, G. and Kugi, A. and Steinboeck, A.},
title = {A control-oriented mathematical model for the evolution of temperatures and phases in a steel strip during cooling},
doi = {10.1016/j.ijheatmasstransfer.2024.125365},
pages = {125365},
volume = {225},
journal = {International Journal of Heat and Mass Transfer},
year = {2024},
}
@Article{Landauer2024,
author = {Landauer, J. and Marko, L. and Kugi, Andreas and Steinboeck, Andreas},
journaltitle = {Journal of Process Control},
title = {Mathematical modeling and system analysis for preventing unsteady bulging in continuous slab casting machines},
doi = {10.1016/j.jprocont.2024.103232},
pages = {103232},
volume = {139},
journal = {Journal of Process Control},
year = {2024},
}
@Article{Marko2023,
author = {Marko, Lukas and Kugi, Andreas and Steinboeck, Andreas},
title = {Automatic crossbow control in industrial hot-dip galvanizing lines},
doi = {10.1016/j.jprocont.2023.01.002},
pages = {147-158},
volume = {122},
journal = {Journal of Process Control},
year = {2023},
}
@Article{Landauer2023,
author = {Julian Landauer and Andreas Kugi and Andreas Steinboeck},
title = {Mathematical modelling of an electrostatic oiling machine for steel strips},
doi = {10.1080/13873954.2023.2178466},
number = {1},
pages = {69--94},
volume = {29},
journal = {Mathematical and Computer Modelling of Dynamical Systems},
publisher = {Taylor & Francis},
year = {2023},
}
@Article{Steinbach2023,
author = {Steinbach, J. and Jadachowski, L. and Steinboeck, A. and Kugi, A.},
title = {Modeling and observer design of an inductive oven with continuous product flow},
doi = {10.1016/j.mechatronics.2023.103041},
pages = {103041},
volume = {95},
journal = {Mechatronics},
year = {2023},
}
@InProceedings{Landauer2025,
author = {Landauer, J. and Gasparini, L. and Kugi, A. and Steinboeck, A.},
booktitle = {Proceedings of the 11th Vienna International Conference on Mathematical Modelling MATHMOD 2025},
title = {Empirical Modeling of Unsteady Bulging in Continuous Slab Casters},
doi = {10.1016/j.ifacol.2025.03.005},
number = {1},
pages = {19--24},
volume = {59},
address = {Vienna, Austria},
issn = {2405-8963},
journaltitle = {IFAC-PapersOnLine},
year = {2025},
}
@InProceedings{Jadachowski2025,
author = {Jadachowski, L. and Kugi, A. and Steinboeck, A.},
booktitle = {Proceedings of the 2024 IEEE Industry Applications Society Annual Meeting (IAS)},
title = {Induction Heating System as a Soft-Sensor for the B-H Curve of Steel Strips in a Continuous Induction Furnace},
doi = {10.1109/IAS55788.2024.11023661},
pages = {1--7},
publisher = {IEEE},
issn = {1941-0107},
year = {2025},
}
@InProceedings{Gasparini2024,
author = {Gasparini, L. and Marko, L. and Landauer, J. and Kugi, A. and Fuchshumer, S. and Steinboeck, A.},
booktitle = {Proceedings of the 7th IFAC Workshop on Mining, Mineral and Metal Processing MMM 2024},
title = {Optimal Sensor Placement for Mold Level in Continuous Casting},
doi = {10.1016/j.ifacol.2024.09.299},
number = {22},
pages = {107--112},
volume = {58},
address = {Brisbane, Australia},
issn = {2405-8963},
journaltitle = {IFAC-PapersOnLine},
year = {2024},
}
@InProceedings{Sannes2024,
author = {Sannes, S. and Jadachowski, L. and Niederer, M. and Kugi, A. and Steinboeck, A.},
booktitle = {Proceedings of the 7th IFAC Workshop on Mining, Mineral and Metal Processing MMM 2024},
title = {Phase Fraction Estimation Using Measured Dilation, a Lattice Parameter Model, and a Curve-Fitting Method},
doi = {10.1016/j.ifacol.2024.09.289},
number = {22},
pages = {48--53},
volume = {58},
address = {Brisbane, Australia},
issn = {2405-8963},
journaltitle = {IFAC-PapersOnLine},
year = {2024},
}
@InProceedings{Venter2024,
author = {J. Venter and A. Kugi and A.Steinboeck},
booktitle = {Tagungsband GMA-Fachausschuss 2.13 ''Modellbildung, Identifikation und Simulation in der Automatisierungstechnik''},
title = {Physics-based models with local parameterization for the jet wiping process in an industrial hot-dip galvanizing line},
location = {Anif/Salzburg, Austria},
year = {2024},
}
@InProceedings{Landauer2024,
author = {J. Landauer and P. Dollhäubl and S. Fuchshumer and A. Kugi and A.Steinboeck},
booktitle = {Tagungsband GMA-Fachausschuss 2.13 ''Modellbildung, Identifikation und Simulation in der Automatisierungstechnik''},
title = {Modellierung der instation\"aren Ausbauchung der Strangschale in Stranggießanlagen},
location = {Anif/Salzburg, Austria},
year = {2024},
}
@InProceedings{Marko2023a,
author = {Marko, L. and Kugi, A. and Steinboeck, A.},
booktitle = {Proceedings of the 2023 IEEE Conference on Control Technology and Applications (CCTA)},
date = {2023-08},
title = {Data-based prediction of the correction roll intermesh in industrial hot-dip galvanizing lines},
doi = {10.1109/ccta54093.2023.10253412},
pages = {898-904},
address = {Bridgetown,Barbados},
year = {2023},
}
@InProceedings{Steinbach2023b,
author = {J. Steinbach and L. Jadachowski and A. Kugi and A. Steinboeck},
booktitle = {Proceedings of the COMSOL 2023 Conference},
title = {Optimal Design of Baking Plates for an Inductive Wafer Baking Oven},
address = {Munich, Germany},
month = {10},
year = {2023},
}
@InProceedings{Jadachowski2023,
author = {Jadachowski, L. and Marko, L. and Kugi, A. and Steinboeck, A.},
booktitle = {Proceedings of the 22nd IFAC World Congress},
date = {2023},
title = {Frequency-Based Estimation of the B-H Curve of Steel Strips in a Continuous Induction Furnace},
doi = {10.1016/j.ifacol.2023.10.972},
number = {2},
pages = {4627-4632},
volume = {56},
address = {Yokohama, Japan},
issue = {2},
journaltitle = {IFAC-PapersOnLine},
month = {7},
year = {2023},
}
@InProceedings{Kowalski2023,
author = {Kowalski, M. and Kugi, A. and Steinboeck, A.},
booktitle = {Proceedings of the 22nd IFAC World Congress},
date = {2023},
title = {Job Scheduling for a Multi-Line Steel Hot Rolling Mill With Selectable Furnaces},
doi = {10.1016/j.ifacol.2023.10.184},
number = {2},
pages = {5376-5381},
volume = {56},
address = {Yokohama, Japan},
issn = {2405-8963},
issue = {2},
journaltitle = {IFAC-PapersOnLine},
month = {7},
year = {2023},
}
@InProceedings{Marko2023b,
author = {Marko, L. and Kugi, A. and Steinboeck, A.},
booktitle = {Proceedings of the 22nd IFAC World Congress},
date = {2023},
title = {Add-on Harmonic Disturbance Cancellation Control in Continuous Hot-Dip Galvanizing Lines},
doi = {10.1016/j.ifacol.2023.10.732},
number = {2},
pages = {4412-4417},
volume = {56},
address = {Yokohama, Japan},
issue = {2},
journaltitle = {IFAC-PapersOnLine},
month = {7},
year = {2023},
}
@InProceedings{Pietschnig2022a,
author = {C. Pietschnig and A. Steinboeck and A. Kugi},
booktitle = {Proceedings of the 19th IFAC Symposium on Control, Optimization and Automation in Mining, Mineral and Metal Processing MMM},
title = {Optimal control of motion and camber of steel plates in a multi-pass reversing rolling process},
doi = {10.1016/j.ifacol.2022.09.264},
note = {IFAC-PapersOnLine},
number = {21},
pages = {180--185},
volume = {55},
address = {Montreal, Canada},
month = {08},
year = {2022},
}
@InProceedings{Kowalski2022,
author = {M. Kowalski and A. Steinboeck and A. Kugi},
booktitle = {Proceedings of the 19th IFAC Symposium on Control, Optimization and Automation in Mining, Mineral and Metal Processing MMM},
title = {Scheduling Multiple Groups of Jobs for a Multi-Line Steel Hot Rolling Mill},
doi = {10.1016/j.ifacol.2022.09.262},
note = {IFAC-PapersOnLine},
number = {21},
pages = {168--173},
volume = {55},
address = {Montreal, Canada},
month = {08},
year = {2022},
}
@InProceedings{Steinbach2022,
author = {Johannes Steinbach and Lukas Jadachowski and Andreas Steinboeck and Andreas Kugi},
booktitle = {Proceedings of the 9th IFAC Symposium on Mechatronic Systems MECHATRONICS 2022},
title = {Modeling and Optimization of an Inductive Oven with Continuous Product Flow},
doi = {10.1016/j.ifacol.2022.10.509},
number = {27},
pages = {184-189},
volume = {55},
address = {Los Angeles, USA},
issn = {2405-8963},
month = {9},
year = {2022},
}