Publications

Journal articles | Conference publications | Books and contributions to books

Journal articles

2022

2021

  • U. Knechtelsdorfer, M. Saxinger, M. Schwegel, A. Steinboeck, and A. Kugi, A two-stage observer for the compensation of actuator-induced disturbances in tool-force sensors, Mechanical Systems and Signal Processing, vol. 146, p. 106989 1–12, 2021.
    [BibTex] [Download]
    @Article{knechtelsdorfer2021,
    author = {U. Knechtelsdorfer and M. Saxinger and M. Schwegel and A. Steinboeck and A. Kugi},
    title = {A two-stage observer for the compensation of actuator-induced disturbances in tool-force sensors},
    doi = {10.1016/j.ymssp.2020.106989},
    issn = {0888-3270},
    pages = {106989 1--12},
    url = {http://www.sciencedirect.com/science/article/pii/S0888327020303757},
    volume = {146},
    journal = {Mechanical Systems and Signal Processing},
    keywords = {Sensor response correction, Model based disturbance observer, Tool force sensor, Reduced Luenberger observer, Model adaption, Measurement results},
    year = {2021},
    }
  • J. -F. Mennemann, L. Marko, J. Schmidt, W. Kemmetmüller, and A. Kugi, Nonlinear Model Predictive Control of a Variable-Speed Pumped-Storage Power Plant, IEEE Transactions on Control Systems Technology, vol. 29, iss. 2, p. 645–660, 2021.
    [BibTex] [Download]
    @Article{Mennemann2021,
    author = {Mennemann, J.-F. and Marko, L. and Schmidt, J. and Kemmetm{\"u}ller, W. and Kugi, A.},
    title = {{Nonlinear Model Predictive Control of a Variable-Speed Pumped-Storage Power Plant}},
    doi = {10.1109/TCST.2019.2956910},
    issn = {1063-6536},
    number = {2},
    pages = {645--660},
    volume = {29},
    journal = {IEEE Transactions on Control Systems Technology},
    year = {2021},
    }
  • U. Knechtelsdorfer, A. Steinboeck, F. Schausberger, and A. Kugi, A novel mass flow controller for tandem hot rolling mills, Journal of ProcessControl, vol. 104, p. 168–177, 2021.
    [BibTex] [Download]
    @Article{knechtelsdorfer2021a,
    author = {U. Knechtelsdorfer and A. Steinboeck and F. Schausberger and A. Kugi},
    title = {A novel mass flow controller for tandem hot rolling mills},
    doi = {10.1016/j.jprocont.2021.07.002},
    issn = {0959-152},
    pages = {168--177},
    volume = {104},
    journal = {Journal of ProcessControl},
    year = {2021},
    }

2020

  • L. Marko, M. Saxinger, A. Steinboeck, and A. Kugi, Magnetic Actuator Design for Strip Stabilizers in Hot-Dip Galvanizing Lines: Examining Rules and Basic Tradeoffs, IEEE Industry Applications Magazine, vol. 26, iss. 2, p. 54–63, 2020.
    [BibTex] [Download]
    @Article{Marko2020,
    author = {Marko, Lukas and Saxinger, Martin and Steinboeck, Andreas and Kugi, Andreas},
    title = {Magnetic Actuator Design for Strip Stabilizers in Hot-Dip Galvanizing Lines: Examining Rules and Basic Tradeoffs},
    doi = {10.1109/MIAS.2019.2943662},
    issn = {1558-0598},
    number = {2},
    pages = {54--63},
    volume = {26},
    journal = {IEEE Industry Applications Magazine},
    year = {2020},
    }
  • J. D. le Roux, A. Steinboeck, A. Kugi, and I. K. Craig, Steady-state and dynamic simulation of a grinding mill using grind curves, Minerals Engineering, vol. 152, p. 106208 1–11, 2020.
    [BibTex]
    @Article{Roux2020,
    author = {le Roux, J.D. and Steinboeck, A. and Kugi, A. and Craig, I.K.},
    title = {Steady-state and dynamic simulation of a grinding mill using grind curves},
    doi = {10.1016/j.mineng.2020.106208},
    pages = {106208 1--11},
    volume = {152},
    journal = {Minerals Engineering},
    year = {2020},
    }
  • M. Saxinger, L. Marko, A. Steinboeck, and A. Kugi, Feedforward control of the transverse strip profile in hot-dip galvanizing lines, Journal of Process Control, vol. 92, pp. 35-49, 2020.
    [BibTex] [Download]
    @Article{Saxinger2020,
    author = {Saxinger, M. and Marko, L. and Steinboeck, A. and Kugi, A.},
    title = {Feedforward control of the transverse strip profile in hot-dip galvanizing lines},
    doi = {10.1016/j.jprocont.2020.05.007},
    issn = {0959-1524},
    pages = {35 - 49},
    volume = {92},
    journal = {Journal of Process Control},
    year = {2020},
    }
  • L. Marko, M. Saxinger, W. Kemmetmüller, A. Steinboeck, and A. Kugi, Frequency-adaptive cancellation of harmonic disturbances at non-measurable positions of steel strips, Mechatronics, vol. 71, p. 102423, 2020.
    [BibTex] [Download]
    @Article{Marko2020a,
    author = {Marko, Lukas and Saxinger, Martin and Kemmetm\"uller, Wolfgang and Steinboeck, Andreas and Kugi, Andreas},
    title = {Frequency-adaptive cancellation of harmonic disturbances at non-measurable positions of steel strips},
    doi = {10.1016/j.mechatronics.2020.102423},
    pages = {102423},
    volume = {71},
    journal = {Mechatronics},
    year = {2020},
    }

2019

  • M. Müller, A. Steinboeck, K. Prinz, A. Ettl, A. Kugi, K. Etzelsdorfer, S. Fuchshumer, and H. Seyrkammer, Asymmetric hydrodynamic roll gap model and its experimental validation, International Journal of Advanced Manufacturing Technology, vol. 100, iss. 9-12, p. 3101-–3111, 2019.
    [BibTex] [Download]
    @Article{Mueller2019,
    author = {M\"uller, Martin and Steinboeck, Andreas and Prinz, Katharina and Ettl, Andreas and Kugi, Andreas and Etzelsdorfer, Kurt and Fuchshumer, Stefan and Seyrkammer, Hannes},
    title = {Asymmetric hydrodynamic roll gap model and its experimental validation},
    doi = {10.1007/s00170-018-2634-1},
    issn = {1433-3015},
    number = {9-12},
    pages = {3101-–3111},
    volume = {100},
    journal = {International Journal of Advanced Manufacturing Technology},
    year = {2019},
    }
  • A. Steinboeck, M. Saxinger, and A. Kugi, Hamilton’s Principle for Material and Nonmaterial Control Volumes Using Lagrangian and Eulerian Description of Motion, Applied Mechanics Reviews, vol. 71, iss. 1, p. 010802-1–010802-14, 2019.
    [BibTex] [Download]
    @Article{Steinboeck2019,
    author = {Steinboeck, Andreas and Saxinger, Martin and Kugi, Andreas},
    title = {Hamilton’s Principle for Material and Nonmaterial Control Volumes Using Lagrangian and Eulerian Description of Motion},
    doi = {10.1115/1.4042434},
    issn = {0003-6900},
    number = {1},
    pages = {010802-1--010802-14},
    volume = {71},
    journal = {Applied Mechanics Reviews},
    year = {2019},
    }
  • K. Prinz, A. Steinboeck, M. Müller, A. Ettl, F. Schausberger, and A. Kugi, Online Parameter Estimation for Adaptive Feedforward Control of the Strip Thickness in a Hot Strip Rolling Mill, Journal of Manufacturing Science and Engineering, vol. 141, iss. 7, p. 071005-1–071005-12, 2019.
    [BibTex] [Download]
    @Article{Prinz2019,
    author = {Prinz, Katharina and Steinboeck, Andreas and M\"uller, Martin and Ettl, Andreas and Schausberger, Florian and Kugi, Andreas},
    title = {Online Parameter Estimation for Adaptive Feedforward Control of the Strip Thickness in a Hot Strip Rolling Mill},
    doi = {10.1115/1.4043575},
    issn = {0022-0817},
    number = {7},
    pages = {071005-1--071005-12},
    volume = {141},
    journal = {Journal of Manufacturing Science and Engineering},
    year = {2019},
    }
  • G. Stadler, A. Steinboeck, M. Baumgart, A. Ettl, and A. Kugi, Model-based estimation of the stress-strain curve of metal strips, Mathematical and Computer Modelling of Dynamical Systems, vol. 25, iss. 3, p. 224–241, 2019.
    [BibTex] [Download]
    @Article{Stadler2019,
    author = {Stadler, G. and Steinboeck, A. and Baumgart, M. and Ettl, A. and Kugi, A.},
    title = {Model-based estimation of the stress-strain curve of metal strips},
    doi = {10.1080/13873954.2019.1604553},
    number = {3},
    pages = {224--241},
    volume = {25},
    journal = {Mathematical and Computer Modelling of Dynamical Systems},
    year = {2019},
    }
  • C. Pietschnig, L. Marko, W. Kemmetmüller, and A. Kugi, Optimal feedforward control of hydraulic drive systems with long pipelines, PAMM, Proceedings in Applied Mathematics and Mechanics, vol. 19, p. 1–2, 2019.
    [BibTex]
    @Article{Pietschnig2019a,
    author = {Pietschnig, C. and Marko, L. and Kemmetm{\"u}ller, W. and Kugi, A.},
    title = {{Optimal feedforward control of hydraulic drive systems with long pipelines}},
    doi = {10.1002/pamm.201900195},
    pages = {1--2},
    volume = {19},
    journal = {PAMM, Proceedings in Applied Mathematics and Mechanics},
    year = {2019},
    }

2018

2017

  • M. Baumgart, A. Steinboeck, M. Saxinger, and A. Kugi, Elasto-plastic bending of steel strip in a hot-dip galvanizing line, Acta Mechanica, vol. 228, iss. 7, p. 2455–2470, 2017.
    [BibTex]
    @Article{Baumgart2017,
    author = {Baumgart, Michael and Steinboeck, Andreas and Saxinger, Martin and Kugi, Andreas},
    title = {Elasto-plastic bending of steel strip in a hot-dip galvanizing line},
    doi = {10.1007/s00707-017-1824-5},
    issn = {0001-5970},
    number = {7},
    pages = {2455--2470},
    volume = {228},
    journal = {Acta Mechanica},
    year = {2017},
    }
  • L. Jadachowski, A. Steinboeck, and A. Kugi, Two-dimensional thermal modelling with specular reflections in an experimental annealing furnace, Mathematical and Computer Modelling of Dynamic Systems, vol. 23, iss. 1, p. 23–39, 2017.
    [BibTex]
    @Article{Jadachowski17,
    author = {Jadachowski, Lukasz and Steinboeck, A. and Kugi, A.},
    title = {Two-dimensional thermal modelling with specular reflections in an experimental annealing furnace},
    doi = {10.1080/13873954.2016.1237969},
    issn = {1387-3954},
    number = {1},
    pages = {23--39},
    volume = {23},
    journal = {Mathematical and Computer Modelling of Dynamic Systems},
    year = {2017},
    }
  • K. Prinz, A. Steinboeck, M. Müller, A. Ettl, and A. Kugi, Automatic gauge control under laterally asymmetric rolling conditions combined with feedforward, IEEE Transactions on Industry Applications, vol. 53, iss. 3, p. 2560–2568, 2017.
    [BibTex] [Download]
    @Article{Prinz17,
    author = {Prinz, K. and Steinboeck, A. and M\"uller, M. and Ettl, A. and Kugi, A.},
    title = {Automatic gauge control under laterally asymmetric rolling conditions combined with feedforward},
    doi = {10.1109/TIA.2017.2660458},
    issn = {0093-9994},
    number = {3},
    pages = {2560--2568},
    volume = {53},
    journal = {IEEE Transactions on Industry Applications},
    publisher = {IEEE},
    year = {2017},
    }
  • F. Rötzer, L. Jadachowski, and A. Kugi, Modellordnungsreduktion, Beobachterentwurf und Sensorplatzierung für einen Infrarot-Glühofen, at – Automatisierungstechnik, vol. 65, iss. 5, p. 337–349, 2017.
    [BibTex]
    @Article{Roetzer17,
    author = {R{\"o}tzer, Florian and Jadachowski, L. and Kugi, A.},
    title = {Modellordnungsreduktion, Beobachterentwurf und Sensorplatzierung f{\"u}r einen Infrarot-Gl{\"u}hofen},
    doi = {10.1515/auto-2016-0119},
    issn = {2196-677X},
    number = {5},
    pages = {337--349},
    volume = {65},
    journal = {at -- Automatisierungstechnik},
    year = {2017},
    }
  • J. D. le Roux, A. Steinboeck, A. Kugi, and I. K. Craig, An EKF observer to estimate semi-autogenous grinding mill hold-ups, Journal of Process Control, vol. 51, p. 27–41, 2017.
    [BibTex]
    @Article{leroux:17a,
    author = {J.D. le Roux and A. Steinboeck and A. Kugi and I.K. Craig},
    title = {An {EKF} observer to estimate semi-autogenous grinding mill hold-ups},
    doi = {10.1016/j.jprocont.2016.12.006},
    issn = {0959-1524},
    pages = {27--41},
    volume = {51},
    journal = {Journal of Process Control},
    year = {2017},
    }
  • M. Saxinger, A. Steinboeck, L. Marko, M. Baumgart, and A. Kugi, Nichtlineares Bewegungsmodell für ein Stahlband in einer Oberflächenbeschichtungsanlage, at – Automatisierungstechnik, vol. 65, iss. 8, p. 546–560, 2017.
    [BibTex]
    @Article{Saxinger17,
    author = {Saxinger, M. and Steinboeck, A. and Marko, Lukas and Baumgart, M. and Kugi, Andreas},
    title = {Nichtlineares Bewegungsmodell f{\"u}r ein Stahlband in einer Oberfl{\"a}chenbeschichtungsanlage},
    doi = {10.1515/auto-2017-0024},
    issn = {2196-677X},
    number = {8},
    pages = {546--560},
    volume = {65},
    journal = {at -- Automatisierungstechnik},
    year = {2017},
    }
  • A. Steinboeck, A. Ettl, and A. Kugi, Dynamical Models of the Camber and the Lateral Position in Flat Rolling, Applied Mechanics Reviews, vol. 69, iss. 4, p. 040801-1–040801-14, 2017.
    [BibTex]
    @Article{Steinboeck17,
    author = {Steinboeck, Andreas and Ettl, Andreas and Kugi, Andreas},
    title = {Dynamical Models of the Camber and the Lateral Position in Flat Rolling},
    doi = {10.1115/1.4037177},
    issn = {0003-6900},
    number = {4},
    pages = {040801-1--040801-14},
    volume = {69},
    journal = {Applied Mechanics Reviews},
    year = {2017},
    }
  • S. Strommer, M. Niederer, A. Steinboeck, L. Jadachowski, and A. Kugi, Nonlinear Observer for Temperatures and Emissivities in a Strip Annealing Furnace, IEEE Transactions on Industry Applications, vol. 53, iss. 3, p. 2578–2586, 2017.
    [BibTex]
    @Article{Strommer17,
    author = {Strommer, S. and Niederer, M. and Steinboeck, A. and Jadachowski, L. and Kugi, A.},
    title = {Nonlinear Observer for Temperatures and Emissivities in a Strip Annealing Furnace},
    doi = {10.1109/TIA.2017.2669327},
    issn = {0093-9994},
    number = {3},
    pages = {2578--2586},
    volume = {53},
    journal = {IEEE Transactions on Industry Applications},
    publisher = {IEEE},
    year = {2017},
    }

2016

  • A. Deutschmann, L. Jadachowski, and A. Kugi, Backstepping-based boundary observer for a class of time-varying linear hyperbolic PIDEs, Automatica, vol. 68, p. 369–377, 2016.
    [BibTex] [Download]
    @Article{Deutschmann16b,
    author = {Deutschmann, Andreas and Jadachowski, Lukasz and Kugi, A.},
    title = {Backstepping-based boundary observer for a class of time-varying linear hyperbolic {PIDEs}},
    doi = {10.1016/j.automatica.2016.02.007},
    issn = {0005-1098},
    pages = {369--377},
    volume = {68},
    journal = {Automatica},
    year = {2016},
    }

2015

  • L. Jadachowski, T. Meurer, and A. Kugi, Backstepping Observers for linear PDEs on Higher-Dimensional Spatial Domains, Automatica, vol. 51, p. 85–97, 2015.
    [BibTex]
    @Article{Jadachowski14a,
    author = {Jadachowski, L. and Meurer, T. and Kugi, A.},
    title = {{Backstepping Observers for linear PDEs on Higher-Dimensional Spatial Domains}},
    doi = {10.1016/j.automatica.2014.10.108},
    pages = {85--97},
    volume = {51},
    journal = {Automatica},
    year = {2015},
    }
  • G. Stadler, A. Steinboeck, M. Baumgart, and A. Kugi, Modellierung des Umschlingungswinkels eines auf Rollen geführten Metallbandes, at – Automatisierungstechnik, vol. 63, iss. 8, p. 646–655, 2015.
    [BibTex] [Download]
    @Article{Stadler15,
    author = {Stadler, G. and Steinboeck, A. and Baumgart, M. and Kugi, A.},
    title = {Modellierung des Umschlingungswinkels eines auf Rollen gef\"uhrten Metallbandes},
    doi = {10.1515/auto-2015-0043},
    number = {8},
    pages = {646--655},
    volume = {63},
    journal = {at -- Automatisierungstechnik},
    year = {2015},
    }

Conference publications

2022

  • C. Pietschnig, A. Steinboeck, and A. Kugi, Optimal control of motion and camber of steel plates in a multi-pass reversing rolling process, in Proceedings of the 19th IFAC Symposium on Control, Optimization and Automation in Mining, Mineral and Metal Processing MMM, Montreal, Canada, 2022, p. 180–185.
    [BibTex]
    @InProceedings{Pietschnig2022a,
    author = {C. Pietschnig and A. Steinboeck and A. Kugi},
    booktitle = {Proceedings of the 19th IFAC Symposium on Control, Optimization and Automation in Mining, Mineral and Metal Processing MMM},
    title = {Optimal control of motion and camber of steel plates in a multi-pass reversing rolling process},
    doi = {10.1016/j.ifacol.2022.09.264},
    note = {IFAC-PapersOnLine},
    number = {21},
    pages = {180--185},
    volume = {55},
    address = {Montreal, Canada},
    month = {08},
    year = {2022},
    }

2021

  • F. Schausberger, C. Pietschnig, A. Ettl, A. Steinboeck, and A. Kugi, Optimization-based estimator for the lateral strip position in tandem hot rolling, in Proceedings of the 6th IFAC Workshop on Mining, Mineral and Metal Processing (MMM), Nancy, France, 2021, pp. 7-12.
    [BibTex]
    @InProceedings{Schausberger2021,
    author = {Schausberger, F. and Pietschnig, C. and Ettl, A. and Steinboeck, A. and Kugi, A.},
    booktitle = {Proceedings of the 6th IFAC Workshop on Mining, Mineral and Metal Processing (MMM)},
    title = {Optimization-based estimator for the lateral strip position in tandem hot rolling},
    doi = {10.1016/j.ifacol.2021.10.042},
    number = {11},
    pages = {7-12},
    volume = {54},
    address = {Nancy, France},
    issn = {2405-8963},
    month = {9},
    year = {2021},
    }
  • U. Knechtelsdorfer, A. Steinboeck, and A. Kugi, Robust Mass Flow Control in Hot Rolling Mills, in Proceedings of the IEEE Industry Applications Society Annual Meeting, Vancouver, Canada, 2021, p. 1–7.
    [BibTex]
    @InProceedings{Knechtelsdorfer2021,
    author = {Knechtelsdorfer, U. and Steinboeck, A. and Kugi, A.},
    booktitle = {Proceedings of the IEEE Industry Applications Society Annual Meeting},
    title = {Robust Mass Flow Control in Hot Rolling Mills},
    doi = {10.1109/IAS48185.2021.9677376},
    pages = {1--7},
    address = {Vancouver, Canada},
    month = {10},
    year = {2021},
    }

2020

  • L. Jadachowski, F. Roetzer, A. Steinboeck, and A. Kugi, In-Line Estimation of the Magnetization Curve of Steel Strips in a Continuous Induction Furnace, in Proceedings of the 21st IFAC World Congress, Berlin, Germany, 2020, p. 12062–12067.
    [BibTex]
    @InProceedings{Jadachowski2020,
    author = {L. Jadachowski and F. Roetzer and A. Steinboeck and A. Kugi},
    booktitle = {Proceedings of the 21st IFAC World Congress},
    title = {In-Line Estimation of the Magnetization Curve of Steel Strips in a Continuous Induction Furnace},
    doi = {10.1016/j.ifacol.2020.12.750},
    note = {IFAC-PapersOnLine},
    number = {2},
    pages = {12062--12067},
    volume = {53},
    address = {Berlin, Germany},
    issn = {2405-8963},
    month = {06},
    year = {2020},
    }
  • F. Rötzer, A. Aschauer, L. Jadachowski, A. Steinboeck, and A. Kugi, Temperature Control for Induction Heating of Thin Strips, in Proceedings of the 21st IFAC World Congress, Berlin, Germany, 2020, p. 11968–11973.
    [BibTex]
    @InProceedings{Roetzer2020,
    author = {F. R\"otzer and A. Aschauer and L. Jadachowski and A. Steinboeck and A. Kugi},
    booktitle = {Proceedings of the 21st IFAC World Congress},
    title = {Temperature Control for Induction Heating of Thin Strips},
    doi = {10.1016/j.ifacol.2020.12.722},
    note = {IFAC-PapersOnLine},
    number = {2},
    pages = {11968--11973},
    volume = {53},
    address = {Berlin, Germany},
    issn = {2405-8963},
    month = {06},
    year = {2020},
    }
  • L. Marko, M. Saxinger, M. Bittner, A. Steinboeck, and A. Kugi, Discrete-Time Repetitive Control for Multi-Harmonic Reference Trajectories with Arbitrary Frequency, in Proceedings of the 21st IFAC World Congress, Berlin, Germany, 2020, p. 1646–1651.
    [BibTex]
    @InProceedings{Marko2020b,
    author = {L. Marko and M. Saxinger and M. Bittner and A. Steinboeck and A. Kugi},
    booktitle = {Proceedings of the 21st IFAC World Congress},
    title = {Discrete-Time Repetitive Control for Multi-Harmonic Reference Trajectories with Arbitrary Frequency},
    doi = {10.1016/j.ifacol.2020.12.2221},
    note = {IFAC-PapersOnLine},
    number = {2},
    pages = {1646--1651},
    volume = {53},
    address = {Berlin, Germany},
    issn = {2405-8963},
    month = {06},
    year = {2020},
    }
  • C. Pietschnig, A. Ettl, U. Knechtelsdorfer, A. Steinboeck, and A. Kugi, Optimal control of plate motion and camber in a reversing rolling mill, in Proceedings of the 21st IFAC World Congress, Berlin, Germany, 2020, p. 11962–11967.
    [BibTex]
    @InProceedings{Pietschnig2020,
    author = {C. Pietschnig and A. Ettl and U. Knechtelsdorfer and A. Steinboeck and A. Kugi},
    booktitle = {Proceedings of the 21st IFAC World Congress},
    title = {Optimal control of plate motion and camber in a reversing rolling mill},
    doi = {10.1016/j.ifacol.2020.12.721},
    note = {IFAC-PapersOnLine},
    number = {2},
    pages = {11962--11967},
    volume = {53},
    address = {Berlin, Germany},
    issn = {2405-8963},
    month = {06},
    year = {2020},
    }

2019

  • L. Marko, M. Saxinger, A. Steinboeck, and A. Kugi, Elektromagnetische Schwingungstilgung für Stahlbänder mit unbekannter harmonischer Störung, in Tagungsband Mechatronik, Paderborn, Deutschland, 2019, p. 31–36.
    [BibTex] [Download]
    @InProceedings{Marko2019,
    author = {Marko, L. and Saxinger, M. and Steinboeck, A. and Kugi, A.},
    booktitle = {Tagungsband Mechatronik},
    title = {Elektromagnetische Schwingungstilgung für Stahlb\"ander mit unbekannter harmonischer St\"orung},
    doi = {10.17619/UNIPB/1-773},
    pages = {31--36},
    address = {Paderborn, Deutschland},
    month = {3},
    year = {2019},
    }
  • C. Pietschnig, L. Marko, W. Kemmetmüller, and A. Kugi, Optimal feed forward control of hydraulic drive systems with long pipelines, in Book of Abstracts of the 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019), Wien, 2019, p. 521–522.
    [BibTex]
    @InProceedings{Pietschnig2019,
    author = {Pietschnig, C. and Marko, L. and Kemmetm\"uller, W. and Kugi, A.},
    booktitle = {Book of Abstracts of the 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019)},
    title = {Optimal feed forward control of hydraulic drive systems with long pipelines},
    isbn = {978-3-903024-84-7},
    pages = {521--522},
    address = {Wien},
    month = {2},
    year = {2019},
    }
  • U. Knechtelsdorfer, M. Müller, A. Steinboeck, and A. Kugi, Slip Model Adaptation Based on Measurements of the Strip Velocity, in Proceedings of the 18th IFAC Symposium on Control, Optimization and Automation in Mining, Mineral and Metal Processing, Stellenbosch, South Africa, 2019, p. 42–47.
    [BibTex]
    @InProceedings{Knechtelsdorfer2019,
    author = {Knechtelsdorfer, U. and M\"uller, M. and Steinboeck, A. and Kugi, A.},
    booktitle = {Proceedings of the 18th IFAC Symposium on Control, Optimization and Automation in Mining, Mineral and Metal Processing},
    title = {Slip Model Adaptation Based on Measurements of the Strip Velocity},
    doi = {10.1016/j.ifacol.2019.09.161},
    pages = {42--47},
    address = {Stellenbosch, South Africa},
    month = {8},
    year = {2019},
    }
  • M. Saxinger, L. Marko, A. Steinboeck, and A. Kugi, Non-Collocated Position Control of Steel Strip With Electromagnetic Rejection of Unknown Multi-Harmonic Disturbances, in Proceedings of the 8th IFAC Symposium on Mechatronic Systems MECHATRONICS 2019, Vienna, Austria, 2019, pp. 430-1.
    [BibTex]
    @InProceedings{Saxinger2019,
    author = {Saxinger, M. and Marko, L. and Steinboeck, A. and Kugi, A.},
    booktitle = {Proceedings of the 8th IFAC Symposium on Mechatronic Systems MECHATRONICS 2019},
    title = {Non-Collocated Position Control of Steel Strip With Electromagnetic Rejection of Unknown Multi-Harmonic Disturbances},
    doi = {10.1016/j.ifacol.2019.11.713},
    number = {15},
    pages = {430-1},
    volume = {52},
    address = {Vienna, Austria},
    issn = {2405-8963},
    month = {9},
    year = {2019},
    }
  • L. Marko, M. Saxinger, A. Steinboeck, and A. Kugi, Elektromagnetische Bandstabilisierung und Schwingungskompensation in kontinuierlichen Feuerverzinkungsanlagen, in Tagungsband GMA-Fachausschuss 1.40 “Systemtheorie und Regelungstechnik”, Anif/Salzburg, Austria, 2019, p. 156–169.
    [BibTex]
    @InProceedings{Marko2019a,
    author = {Marko, L. and Saxinger, M. and Steinboeck, A. and Kugi, A.},
    booktitle = {Tagungsband GMA-Fachausschuss 1.40 "Systemtheorie und Regelungstechnik"},
    title = {Elektromagnetische Bandstabilisierung und Schwingungskompensation in kontinuierlichen Feuerverzinkungsanlagen},
    isbn = {978-3-9819634-2-7},
    pages = {156--169},
    address = {Anif/Salzburg, Austria},
    month = {9},
    year = {2019},
    }

2018

  • A. Ettl, K. Prinz, M. Mueller, A. Steinboeck, and A. Kugi, Mathematical Model and Stability Analysis of the Lateral Plate Motion in a Reversing Rolling Mill Stand, in Proceedings of the 9th Vienna International Conference on Mathematical Modelling (MATHMOD), Vienna, Austria, 2018, p. 73–78.
    [BibTex]
    @InProceedings{Ettl2018,
    author = {Ettl, A. and Prinz, K. and Mueller, M. and Steinboeck, A. and Kugi, A.},
    booktitle = {Proceedings of the 9th Vienna International Conference on Mathematical Modelling (MATHMOD)},
    title = {Mathematical Model and Stability Analysis of the Lateral Plate Motion in a Reversing Rolling Mill Stand},
    doi = {10.1016/j.ifacol.2018.03.013},
    pages = {73--78},
    address = {Vienna, Austria},
    month = {2},
    year = {2018},
    }
  • L. Jadachowski, A. Steinboeck, and A. Kugi, Model Averaging and Feedforward Temperature Control in an Oscillating Annealing Furnace, in Proceedings of the 5th IFAC Workshop on Mining, Mineral and Metal Processing (MMM), Shanghai, China, 2018, p. 163–168.
    [BibTex]
    @InProceedings{Jadachowski2018a,
    author = {Jadachowski, L. and Steinboeck, A. and Kugi, A.},
    booktitle = {Proceedings of the 5th IFAC Workshop on Mining, Mineral and Metal Processing (MMM)},
    title = {Model Averaging and Feedforward Temperature Control in an Oscillating Annealing Furnace},
    doi = {10.1016/j.ifacol.2018.09.410},
    number = {21},
    pages = {163--168},
    volume = {51},
    address = {Shanghai, China},
    issn = {2405-8963},
    month = {8},
    year = {2018},
    }
  • M. Müller, A. Steinboeck, K. Prinz, and A. Kugi, Optimal Parameter Identification for a Hydrodynamic Roll Gap Model in Hot Strip Rolling, in Proceedings of the 5th IFAC Workshop on Mining, Mineral and Metal Processing (MMM), Shanghai, China, 2018, p. 195–200.
    [BibTex]
    @InProceedings{Mueller2018,
    author = {M\"uller, M. and Steinboeck, A. and Prinz, K. and Kugi, A.},
    booktitle = {Proceedings of the 5th IFAC Workshop on Mining, Mineral and Metal Processing (MMM)},
    title = {Optimal Parameter Identification for a Hydrodynamic Roll Gap Model in Hot Strip Rolling},
    doi = {10.1016/j.ifacol.2018.09.417},
    number = {21},
    pages = {195--200},
    volume = {51},
    address = {Shanghai, China},
    issn = {2405-8963},
    month = {8},
    year = {2018},
    }
  • L. Marko, M. Saxinger, A. Steinboeck, and A. Kugi, Magnetic actuator design for strip stabilizers in hot dip galvanizing lines, in Proceedings of the IEEE Industry Applications Society Annual Meeting, Portland, USA, 2018, p. 1–9.
    [BibTex]
    @InProceedings{Marko2018a,
    author = {Marko, L. and Saxinger, M. and Steinboeck, A. and Kugi, A.},
    booktitle = {Proceedings of the IEEE Industry Applications Society Annual Meeting},
    title = {Magnetic actuator design for strip stabilizers in hot dip galvanizing lines},
    pages = {1--9},
    address = {Portland, USA},
    month = {9},
    year = {2018},
    }
  • A. Lobe, A. Ettl, A. Steinnboeck, and A. Kugi, Flatness-based nonlinear control of a three-dimensional gantry crane, in Proceedings of the 12th IFAC Symposium on Robot Control SYROCO, Budapest, Hungary, 2018, pp. 331-336.
    [BibTex]
    @InProceedings{Lobe2018,
    author = {Lobe, A. and Ettl, A. and Steinnboeck, A. and Kugi, A.},
    booktitle = {Proceedings of the 12th IFAC Symposium on Robot Control SYROCO},
    title = {Flatness-based nonlinear control of a three-dimensional gantry crane},
    doi = {10.1016/j.ifacol.2018.11.563},
    pages = {331-336},
    address = {Budapest, Hungary},
    month = {8},
    year = {2018},
    }

2017

  • A. Ettl, A. Steinboeck, and A. Kugi, Modell des Bandlaufs in einer Warmwalzstraße, in Tagungsband GMA-Fachausschuss 1.30 “Modellbildung, Identifikation und Simulation in der Automatisierungstechnik”, Anif/Salzburg, Austria, 2017, p. 314–340.
    [BibTex]
    @InProceedings{Ettl2017,
    author = {Ettl, A. and Steinboeck, A. and Kugi, A.},
    booktitle = {Tagungsband GMA-Fachausschuss 1.30 "Modellbildung, Identifikation und Simulation in der Automatisierungstechnik"},
    title = {{Modell des Bandlaufs in einer Warmwalzstra{\ss}e}},
    isbn = {978-3-9819634-0-3},
    pages = {314--340},
    address = {Anif/Salzburg, Austria},
    month = {9},
    year = {2017},
    }
  • L. Jadachowski, A. Steinboeck, and A. Kugi, Feedforward Control of the Temperature Field in an Experimental Annealing Furnace, in Proceedings of the 20th IFAC World Congress, Toulouse, France, 2017, p. 13790–13795.
    [BibTex]
    @InProceedings{Jadachowski17a,
    author = {Jadachowski, L. and Steinboeck, A. and Kugi, A.},
    booktitle = {Proceedings of the 20th IFAC World Congress},
    title = {Feedforward Control of the Temperature Field in an Experimental Annealing Furnace},
    doi = {10.1016/j.ifacol.2017.08.2068},
    number = {1},
    pages = {13790--13795},
    volume = {50},
    address = {Toulouse, France},
    issn = {2405-8963},
    month = {7},
    year = {2017},
    }
  • K. Prinz, F. Schausberger, A. Steinboeck, and A. Kugi, Feedforward control of lateral asymmetries in heavy-plate hot rolling using vision-based position estimation, in Proceedings of the 20th IFAC World Congress, Toulouse, France, 2017, p. 11307–11312.
    [BibTex] [Download]
    @InProceedings{Prinz17a,
    author = {Prinz, K. and Schausberger, F. and Steinboeck, A. and Kugi, A.},
    booktitle = {Proceedings of the 20th IFAC World Congress},
    title = {Feedforward control of lateral asymmetries in heavy-plate hot rolling using vision-based position estimation},
    doi = {10.1016/j.ifacol.2017.08.1651},
    number = {1},
    pages = {11307--11312},
    volume = {50},
    address = {Toulouse, France},
    issn = {2405-8963},
    month = {7},
    year = {2017},
    }
  • G. Stadler, A. Steinboeck, and A. Kugi, Control of Curvature and Contact Force of a Metal Strip at the Strip-Roll Contact Point, in Proceedings of the 20th IFAC World Congress, Toulouse, France, 2017, p. 11325–11330.
    [BibTex]
    @InProceedings{Stadler17,
    author = {Stadler, G. and Steinboeck, A. and Kugi, A.},
    booktitle = {Proceedings of the 20th IFAC World Congress},
    title = {Control of Curvature and Contact Force of a Metal Strip at the Strip-Roll Contact Point},
    doi = {10.1016/j.ifacol.2017.08.1665},
    number = {1},
    pages = {11325--11330},
    volume = {50},
    address = {Toulouse, France},
    issn = {2405-8963},
    month = {7},
    year = {2017},
    }

2016

  • A. Deutschmann, L. Jadachowski, and A. Kugi, A Numerical Implementation of an Extended Luenberger Observer for a Class of Semilinear Hyperbolic PIDEs, in Proceedings of the 2nd IFAC Workshop on Control of Systems Governed by Partial Differential Equations (CPDE 2016), Bertinoro, Italy, 2016, p. 216–221.
    [BibTex]
    @InProceedings{Deutschmann16a,
    author = {Deutschmann, Andreas and Jadachowski, Lukas and Kugi, Andreas},
    booktitle = {Proceedings of the 2nd IFAC Workshop on Control of Systems Governed by Partial Differential Equations (CPDE 2016)},
    title = {A Numerical Implementation of an Extended Luenberger Observer for a Class of Semilinear Hyperbolic PIDEs},
    doi = {10.1016/j.ifacol.2016.07.444},
    number = {8},
    pages = {216--221},
    volume = {49},
    address = {Bertinoro, Italy},
    month = {6},
    year = {2016},
    }
  • L. Jadachowski, A. Steinboeck, and A. Kugi, Optimal Steady-State Temperature Field in an Experimental Annealing Furnace, in Proceedings of the 17th IFAC Symposium on Control, Optimization and Automation in Mining, Mineral and Metal Processing (MMM), Vienna, Austria, 2016, p. 214–219.
    [BibTex]
    @InProceedings{Jadachowski16,
    author = {Jadachowski, L. and Steinboeck, A. and Kugi, A.},
    booktitle = {Proceedings of the 17th IFAC Symposium on Control, Optimization and Automation in Mining, Mineral and Metal Processing (MMM)},
    title = {Optimal Steady-State Temperature Field in an Experimental Annealing Furnace},
    doi = {10.1016/j.ifacol.2016.10.123},
    number = {20},
    pages = {214--219},
    volume = {49},
    address = {Vienna, Austria},
    issn = {2405-8963},
    month = {8},
    year = {2016},
    }
  • J. D. Le Roux, A. Steinboeck, A. Kugi, and I. Craig, Nonlinear Observability of Grinding Mill Conditions, in Proceedings of the 17th IFAC Symposium on Control, Optimization and Automation in Mining, Mineral and Metal Processing (MMM), Vienna, Austria, 2016, p. 13–18.
    [BibTex]
    @InProceedings{LeRoux16,
    author = {Le Roux, Johan Derik and Steinboeck, A. and Kugi, A. and Craig, Ian},
    booktitle = {Proceedings of the 17th IFAC Symposium on Control, Optimization and Automation in Mining, Mineral and Metal Processing (MMM)},
    title = {Nonlinear Observability of Grinding Mill Conditions},
    doi = {10.1016/j.ifacol.2016.10.089},
    number = {20},
    pages = {13--18},
    volume = {49},
    address = {Vienna, Austria},
    issn = {2405-8963},
    month = {8},
    year = {2016},
    }
  • K. Prinz, A. Steinboeck, M. Müller, A. Ettl, and A. Kugi, Automatic gauge control under laterally asymmetric rolling conditions combined with feedforward, in Proceedings of the IEEE Industry Applications Society Annual Meeting, Portland, USA, 2016, p. 1–8.
    [BibTex]
    @InProceedings{Prinz2016,
    author = {Prinz, K. and Steinboeck, A. and M\"uller, M. and Ettl, A. and Kugi, A.},
    booktitle = {Proceedings of the IEEE Industry Applications Society Annual Meeting},
    title = {Automatic gauge control under laterally asymmetric rolling conditions combined with feedforward},
    doi = {10.1109/IAS.2016.7731909},
    isbn = {978-1-4799-8397-1},
    pages = {1--8},
    address = {Portland, USA},
    month = {10},
    year = {2016},
    }
  • M. Saxinger, A. Steinboeck, M. Baumgart, and A. Kugi, Dynamical Model of Axially Moving Steel Strips, in Proceedings of the 17th IFAC Symposium on Control, Optimization and Automation in Mining, Mineral and Metal Processing (MMM), Vienna, Austria, 2016, p. 190–195.
    [BibTex] [Download]
    @InProceedings{Saxinger16,
    author = {Saxinger, M. and Steinboeck, A. and Baumgart, M. and Kugi, A.},
    booktitle = {Proceedings of the 17th IFAC Symposium on Control, Optimization and Automation in Mining, Mineral and Metal Processing (MMM)},
    title = {Dynamical Model of Axially Moving Steel Strips},
    doi = {10.1016/j.ifacol.2016.10.119},
    number = {20},
    pages = {190--195},
    volume = {49},
    address = {Vienna, Austria},
    issn = {2405-8963},
    month = {8},
    year = {2016},
    }
  • M. Saxinger, A. Steinboeck, M. Baumgart, and A. Kugi, Nichtlineares Bewegungsmodell für ein Stahlband in einer Oberflächenbeschichtungsanlage, in Tagungsband GMA-Fachausschuss 1.30 “Modellbildung, Identifikation und Simulation in der Automatisierungstechnik”, Anif/Salzburg, Austria, 2016, p. 46–67.
    [BibTex]
    @InProceedings{Saxinger16a,
    author = {Saxinger, M. and Steinboeck, A. and Baumgart, M. and Kugi, A.},
    booktitle = {Tagungsband GMA-Fachausschuss 1.30 "Modellbildung, Identifikation und Simulation in der Automatisierungstechnik"},
    title = {{Nichtlineares Bewegungsmodell f{\"u}r ein Stahlband in einer Oberfl{\"a}chenbeschichtungsanlage}},
    isbn = {978-3-9815012-9-2},
    pages = {46--67},
    address = {Anif/Salzburg, Austria},
    month = {9},
    year = {2016},
    }
  • S. Strommer, M. Niederer, A. Steinboeck, L. Jadachowski, and A. Kugi, Nonlinear observer for temperatures and emissivities in a strip annealing furnace, in Proceedings of the IEEE Industry Applications Society Annual Meeting, Portland, USA, 2016, p. 1–8.
    [BibTex]
    @InProceedings{Strommer16a,
    author = {Strommer, S. and Niederer, M. and Steinboeck, A. and Jadachowski, L. and Kugi, A.},
    booktitle = {Proceedings of the IEEE Industry Applications Society Annual Meeting},
    title = {Nonlinear observer for temperatures and emissivities in a strip annealing furnace},
    doi = {10.1109/IAS.2016.7731914},
    isbn = {978-1-4799-8397-1},
    pages = {1--8},
    address = {Portland, USA},
    month = {10},
    year = {2016},
    }

2015

  • M. Baumgart, A. Steinboeck, M. Saxinger, and A. Kugi, Elasto-plastic bending of steel strip in a hot-dip galvanizing line, in Proceedings of the 3rd Polish Congress of Mechanics (PCM) and 21st International Conference on Computer Methods in Mechanics (CMM), Gdansk, Poland, 2015, p. 55–56.
    [BibTex]
    @InProceedings{Baumgart15,
    author = {Baumgart, M. and Steinboeck, A. and Saxinger, M. and Kugi, A.},
    booktitle = {Proceedings of the 3rd Polish Congress of Mechanics (PCM) and 21st International Conference on Computer Methods in Mechanics (CMM)},
    title = {Elasto-plastic bending of steel strip in a hot-dip galvanizing line},
    pages = {55--56},
    address = {Gdansk, Poland},
    month = {9},
    year = {2015},
    }
  • A. Deutschmann, L. Jadachowski, and A. Kugi, Backstepping-basierter Beobachter für lineare und semilineare hyperbolische PIDE, in Kolloquium zur Theorie und Praxis von Systemen mit verteilten Parametern, Saarbrücken, 2015.
    [BibTex]
    @InProceedings{Deutschmann15,
    author = {Deutschmann, Andreas and Jadachowski, Lukas and Kugi, Andreas},
    booktitle = {Kolloquium zur Theorie und Praxis von Systemen mit verteilten Parametern, Saarbr{\"u}cken},
    title = {{B}ackstepping-basierter {B}eobachter f{\"u}r lineare und semilineare hyperbolische {PIDE}},
    note = {Vortrag: Kolloquium zur Theorie und Praxis von Systemen mit verteilten Parametern, Saarbr{\"u}cken;},
    month = {3},
    year = {2015},
    }
  • L. Jadachowski, Backstepping observers for some classes of parabolic PDEs, in Invited lecture at Workshop on Applied Problems with Partial Differential Equations, Vienna, Austria, 2015.
    [BibTex]
    @InProceedings{Jadachowski15a,
    author = {Jadachowski, L.},
    booktitle = {Invited lecture at Workshop on Applied Problems with Partial Differential Equations},
    title = {Backstepping observers for some classes of parabolic PDEs},
    address = {Vienna, Austria},
    month = {12},
    year = {2015},
    }
  • L. Jadachowski, A. Steinboeck, and A. Kugi, Heat Transfer with Specular Reflections in an Experimental Annealing Device, in Proceedings of the 8th Vienna International Conference on Mathematical Modelling (MATHMOD), Vienna, Austria, 2015, p. 494–499.
    [BibTex]
    @InProceedings{Jadachowski15,
    author = {Jadachowski, L. and Steinboeck, A. and Kugi, A.},
    booktitle = {Proceedings of the 8th Vienna International Conference on Mathematical Modelling (MATHMOD)},
    title = {Heat Transfer with Specular Reflections in an Experimental Annealing Device},
    doi = {10.1016/j.ifacol.2015.05.069},
    pages = {494--499},
    address = {Vienna, Austria},
    month = {2},
    year = {2015},
    }
  • A. Kugi, Model-based Process Control in the Steel Industry, in Keynote Speaker for 2015 IEEE Multi-Conference on Systems and Control (MSC), Sydney, Australia, 2015.
    [BibTex]
    @InProceedings{Kugi15,
    author = {A. Kugi},
    booktitle = {Keynote Speaker for 2015 IEEE Multi-Conference on Systems and Control (MSC)},
    title = {Model-based Process Control in the Steel Industry},
    address = {Sydney, Australia},
    month = {9},
    year = {2015},
    }
  • A. Kugi, Industrie 4.0: An Automatic Control Perspective, in Invited lecture at voestalpine Synergieplattform, Industrie 4.0 / Smart Production at voestalpine, Linz, Austria, 2015.
    [BibTex]
    @InProceedings{Kugi15a,
    author = {A. Kugi},
    booktitle = {Invited lecture at voestalpine Synergieplattform, Industrie 4.0 / Smart Production at voestalpine},
    title = {Industrie 4.0: An Automatic Control Perspective},
    address = {Linz, Austria},
    month = {6},
    year = {2015},
    }
  • M. Saxinger, A. Steinboeck, M. Baumgart, P. Kerschbaummayr, and A. Kugi, Influence of Air Cooling Jets on the Steady-State Shape of Strips in Hot Dip Galvanizing Lines, in Proceedings of the 4th IFAC Workshop on Mining, Mineral and Metal Processing (MMM), Oulu, Finland, 2015, p. 143–148.
    [BibTex] [Download]
    @InProceedings{Saxinger15,
    author = {Saxinger, M. and Steinboeck, A. and Baumgart, M. and Kerschbaummayr, Peter and Kugi, A.},
    booktitle = {Proceedings of the 4th IFAC Workshop on Mining, Mineral and Metal Processing (MMM)},
    title = {Influence of Air Cooling Jets on the Steady-State Shape of Strips in Hot Dip Galvanizing Lines},
    doi = {10.1016/j.ifacol.2015.10.093},
    number = {17},
    pages = {143--148},
    volume = {48},
    address = {Oulu, Finland},
    issn = {2405-8963},
    month = {8},
    year = {2015},
    }
  • A. Steinboeck, M. Baumgart, G. Stadler, M. Saxinger, and A. Kugi, Dynamical Models of Axially Moving Rods with Tensile and Bending Stiffness, in Proceedings of the 8th Vienna International Conference on Mathematical Modelling (MATHMOD), Vienna, Austria, 2015, p. 598–603.
    [BibTex]
    @InProceedings{Steinboeck15,
    author = {Steinboeck, A. and Baumgart, M. and Stadler, G. and Saxinger, Martin and Kugi, A.},
    booktitle = {Proceedings of the 8th Vienna International Conference on Mathematical Modelling (MATHMOD)},
    title = {Dynamical Models of Axially Moving Rods with Tensile and Bending Stiffness},
    doi = {10.1016/j.ifacol.2015.05.041},
    pages = {598--603},
    address = {Vienna, Austria},
    month = {2},
    year = {2015},
    }
  • A. Steinboeck and A. Kugi, Steering Control of Metal Strips Using a Pivoted Guide Roller, in Proceedings of the 4th IFAC Workshop on Mining, Mineral and Metal Processing (MMM), Oulu, Finland, 2015, p. 137–142.
    [BibTex]
    @InProceedings{Steinboeck15a,
    author = {Steinboeck, A. and Kugi, A.},
    booktitle = {Proceedings of the 4th IFAC Workshop on Mining, Mineral and Metal Processing (MMM)},
    title = {Steering Control of Metal Strips Using a Pivoted Guide Roller},
    doi = {10.1016/j.ifacol.2015.10.092},
    number = {17},
    pages = {137--142},
    volume = {48},
    address = {Oulu, Finland},
    issn = {2405-8963},
    month = {8},
    year = {2015},
    }

2014

  • L. Jadachowski, T. Meurer, and A. Kugi, Backstepping Observers for Periodic Quasi-Linear Parabolic PDEs, in Proceedings of the 19th IFAC World Congress, Cape Town, South Africa, 2014, p. 7761–7766.
    [BibTex]
    @InProceedings{Jadachowski14,
    author = {Jadachowski, L. and Meurer, T. and Kugi, A.},
    booktitle = {Proceedings of the 19th IFAC World Congress},
    title = {Backstepping Observers for Periodic Quasi-Linear Parabolic {PDE}s},
    doi = {10.3182/20140824-6-ZA-1003.01246},
    pages = {7761--7766},
    address = {Cape Town, South Africa},
    month = {8},
    year = {2014},
    }
  • G. Stadler, A. Steinboeck, M. Baumgart, and A. Kugi, Bewegung eines Stahlbandes auf einer beweglichen Stützrolle, in Tagungsband GMA-Fachausschuss 1.30 “Modellbildung, Identifikation und Simulation in der Automatisierungstechnik”, Anif/Salzburg, Austria, 2014, p. 69–89.
    [BibTex]
    @InProceedings{Stadler2014,
    author = {Stadler, Georg and Steinboeck, Andreas and Baumgart, M. and Kugi, A.},
    booktitle = {Tagungsband GMA-Fachausschuss 1.30 "Modellbildung, Identifikation und Simulation in der Automatisierungstechnik"},
    title = {{Bewegung eines Stahlbandes auf einer beweglichen St\"utzrolle}},
    pages = {69--89},
    address = {Anif/Salzburg, Austria},
    month = {9},
    year = {2014},
    }

Books and contributions to books

2021

  • M. Saxinger, Model-based control of the transverse strip shape and position in a hot-dip galvanizing line, A. Kugi, K. Schlacher, and W. Kemmetmüller, Eds., Düren: Shaker Verlag, 2021, vol. 51.
    [BibTex]
    @Book{Saxinger2021,
    author = {Saxinger, M.},
    title = {Model-based control of the transverse strip shape and position in a hot-dip galvanizing line},
    editor = {Kugi, A. and Schlacher, K. and Kemmetm\"uller, W.},
    isbn = {978-3-8440-7847-3},
    publisher = {Shaker Verlag},
    series = {Modellierung und Regelung komplexer dynamischer Systeme},
    volume = {51},
    address = {D\"uren},
    organization = {Institute f{\"u}r Automatisierungs- und Regelungstechnik (TU Wien) und Regelungstechnik und Prozessautomatisierung (JKU Linz)},
    year = {2021},
    }

2017

  • A. Kugi, Roboter & Co: Ein neues Zeitalter der industriellen Automatisierung, in Technologie im Gespräch 2017. Discussing Technology 2017, Wien: Amalthea Verlag, 2017, p. 25–33.
    [BibTex]
    @InCollection{Kugi2017,
    author = {Kugi, Andreas},
    booktitle = {Technologie im Gespr{\"a}ch 2017. Discussing Technology 2017},
    title = {Roboter {\&} Co: Ein neues Zeitalter der industriellen Automatisierung},
    isbn = {978-3-99050-115-3},
    pages = {25--33},
    publisher = {Amalthea Verlag},
    address = {Wien},
    year = {2017},
    }
  • K. Prinz, Model-based control of the thickness profile in hot strip rolling, A. Kugi and K. Schlacher, Eds., Aachen: Shaker Verlag, 2017, vol. 37.
    [BibTex]
    @Book{Prinz2017,
    author = {Prinz, K.},
    title = {Model-based control of the thickness profile in hot strip rolling},
    editor = {A. Kugi and K. Schlacher},
    isbn = {978-3-8440-5633-4},
    publisher = {Shaker Verlag},
    series = {Modellierung und Regelung komplexer dynamischer Systeme},
    volume = {37},
    address = {Aachen},
    organization = {Institute f{\"u}r Automatisierungs- und Regelungstechnik (TU Wien) und Regelungstechnik und Prozessautomatisierung (JKU Linz)},
    year = {2017},
    }