Ernst Csencsics
Dipl.-Ing. Dr.techn.

Raum: CA0424
Tel.: +43 (1) 58801 376 524
E-Mail: csencsics@acin.tuwien.ac.at
Kurzbiographie


Ernst holds a M.Sc. and a Ph.D. degree in Electrical Engineering from TU Wien, Vienna, Austria which he received in 2014 and 2017, respectively.

He is currently working as a postdoctoral researcher at the Automation and Control Institute (ACIN) at TU Wien. His primary research interests are on multidisciplinary systems integration and the design of high performance mechatronic systems in the area of precision engineering, control of opto-mechatronic imaging systems, and in-line metrology systems.

2019

  • E. Csencsics, S. Ito, J. Schlarp, and G. Schitter, System Integration and Control for 3D Scanning Laser Metrology, IEEJ Journal of Industry Applications, vol. 8, iss. 2, 2019.
    [BibTex]
    @Article{TUW-272918,
    author = {Csencsics, Ernst and Ito, Shingo and Schlarp, Johannes and Schitter, Georg},
    title = {System Integration and Control for 3D Scanning Laser Metrology},
    journal = {IEEJ Journal of Industry Applications},
    year = {2019},
    volume = {8},
    number = {2},
    note = {eingeladen},
    doi = {10.1541/ieejjia.8.207},
    keywords = {Mechatronic imaging systems, system integration, scanning laser metrology, model based control, iterative learning control},
    numpages = {11},
    }
  • J. Schlarp, E. Csencsics, and G. Schitter, Optical scanning of a laser triangulation sensor for 3D imaging, IEEE Transactions on Instrumentation and Measurement, 2019.
    [BibTex] [Download]
    @Article{TUW-282494,
    author = {Schlarp, Johannes and Csencsics, Ernst and Schitter, Georg},
    title = {Optical scanning of a laser triangulation sensor for 3D imaging},
    journal = {IEEE Transactions on Instrumentation and Measurement},
    year = {2019},
    note = {zur Ver{\"o}ffentlichung angenommen},
    doi = {10.1109/TIM.2019.2933343},
    keywords = {Precision engineering, Optical sensors, Sensor Systems, Metrology, Optical devices, Ray tracing, Linear feedback control systems},
    }
  • E. Csencsics, J. Schlarp, T. Schopf, and G. Schitter, Compact High Performance Hybrid Reluctance Actuated Fast Steering Mirror System, Mechatronics, vol. 62, 2019.
    [BibTex]
    @Article{TUW-283804,
    author = {Csencsics, Ernst and Schlarp, Johannes and Schopf, Tobias and Schitter, Georg},
    title = {Compact High Performance Hybrid Reluctance Actuated Fast Steering Mirror System},
    journal = {Mechatronics},
    year = {2019},
    volume = {62},
    doi = {10.1016/j.mechatronics.2019.102251},
    keywords = {Fast steering mirror, Hybrid reluctance actuation, Flux steering, Flexure Design, Tip/tilt system},
    numpages = {17},
    }
  • E. Csencsics, B. Sitz, and G. Schitter, Integration of Control Design and System Operation of a High Performance Piezo-actuated Fast Steering Mirror, IEEE/ASME Transactions on Mechatronics, 2019.
    [BibTex]
    @Article{TUW-283802,
    author = {Csencsics, Ernst and Sitz, Benjamin and Schitter, Georg},
    title = {Integration of Control Design and System Operation of a High Performance Piezo-actuated Fast Steering Mirror},
    journal = {IEEE/ASME Transactions on Mechatronics},
    year = {2019},
    note = {zur Ver{\"o}ffentlichung angenommen},
    keywords = {Fast steering mirror, System analysis and design, Optimal control, Motion control, Lissajous trajectory},
    numpages = {9},
    }
  • E. Csencsics, B. Sitz, and G. Schitter, A Fast Piezo Actuated Tip/Tilt Mirror for raster scan applications, in Proceedings of the Joint Conference 8th IFAC Symposium on Mechatronic Systems (MECHATRONICS 2019), and 11th IFAC Symposium on Nonlinear Control Systems (NOLCOS 2019), 2019.
    [BibTex]
    @InProceedings{TUW-281660,
    author = {Csencsics, Ernst and Sitz, Benjamin and Schitter, Georg},
    title = {A Fast Piezo Actuated Tip/Tilt Mirror for raster scan applications},
    booktitle = {Proceedings of the Joint Conference 8th IFAC Symposium on Mechatronic Systems (MECHATRONICS 2019), and 11th IFAC Symposium on Nonlinear Control Systems (NOLCOS 2019)},
    year = {2019},
    volume = {52/15},
    note = {Vortrag: Joint Conference 8th IFAC Symposium on Mechatronic Systems (MECHATRONICS 2019), and 11th IFAC Symposium on Nonlinear Control Systems (NOLCOS 2019), Wien; 2019-09-04 -- 2019-09-06},
    doi = {10.1016/j.ifacol.2019.11.689},
    journal = {IFAC-PapersOnLine/Elsevier},
    keywords = {Fast steering mirror, System analysis and design, Motion control, Piezo actuation, Optomechatronics},
    numpages = {6},
    }
  • J. Schlarp, E. Csencsics, and G. Schitter, Scanning laser triangulation sensor geometry maintaining imaging condition, in Proceedings of the Joint Conference 8th IFAC Symposium on Mechatronic Systems (MECHATRONICS 2019), and 11th IFAC Symposium on Nonlinear Control Systems (NOLCOS 2019), 2019.
    [BibTex] [Download]
    @InProceedings{TUW-281665,
    author = {Schlarp, Johannes and Csencsics, Ernst and Schitter, Georg},
    title = {Scanning laser triangulation sensor geometry maintaining imaging condition},
    booktitle = {Proceedings of the Joint Conference 8th IFAC Symposium on Mechatronic Systems (MECHATRONICS 2019), and 11th IFAC Symposium on Nonlinear Control Systems (NOLCOS 2019)},
    year = {2019},
    volume = {52/15},
    note = {Vortrag: Joint Conference 8th IFAC Symposium on Mechatronic Systems (MECHATRONICS 2019), and 11th IFAC Symposium on Nonlinear Control Systems (NOLCOS 2019), Wien; 2019-09-04 -- 2019-09-06},
    doi = {10.1016/j.ifacol.2019.11.691},
    journal = {IFAC-PapersOnLine/Elsevier},
    keywords = {Absolute measurement, Precision measurements, 3D Sensor, Laser Sensor, Fast Steering Mirror, Optical Sensing and Sensors, System Design, Scheimpflug Condition},
    numpages = {6},
    }

2018

  • E. Csencsics, S. Ito, J. Schlarp, and G. Schitter, Hochpräzise roboterbasierte 3D-In-Prozess-Messtechnik, E&I Elektrotechnik und Informationstechnik, vol. 135, iss. 6, p. 382–388, 2018.
    [BibTex]
    @Article{TUW-272940,
    author = {Csencsics, Ernst and Ito, Shingo and Schlarp, Johannes and Schitter, Georg},
    title = {Hochpr{\"a}zise roboterbasierte 3D-In-Prozess-Messtechnik},
    journal = {E{\&}I Elektrotechnik und Informationstechnik},
    year = {2018},
    volume = {135},
    number = {6},
    pages = {382--388},
    doi = {10.1007/s00502-018-0636-1},
    keywords = {In-Prozess-Messtechnik; optische Sensoren; 3D-Messtechnik; opto-mechatronische Systeme; Systemintegration},
    }
  • E. Csencsics, J. Schlarp, and G. Schitter, High Performance Hybrid-Reluctance-Force-based Tip/tilt System: Design, Control and Evaluation, IEEE/ASME Transactions on Mechatronics, vol. 23, iss. 5, p. 2494–2502, 2018.
    [BibTex]
    @Article{TUW-272938,
    author = {Csencsics, Ernst and Schlarp, Johannes and Schitter, Georg},
    title = {High Performance Hybrid-Reluctance-Force-based Tip/tilt System: Design, Control and Evaluation},
    journal = {IEEE/ASME Transactions on Mechatronics},
    year = {2018},
    volume = {23},
    number = {5},
    pages = {2494--2502},
    doi = {10.1109/TMECH.2018.2866272},
    keywords = {Reluctance actuator, Flux steering, Tip/tilt sys- tem, Flexure design, Fast steering mirror},
    }
  • J. Schlarp, E. Csencsics, and G. Schitter, Influence of Scheimpflug condition on measurements of a scanning laser line sensor for 3D imaging, Journal of Physics: Conference Series, vol. 1065, 2018.
    [BibTex] [Download]
    @Article{TUW-273521,
    author = {Schlarp, Johannes and Csencsics, Ernst and Schitter, Georg},
    title = {Influence of Scheimpflug condition on measurements of a scanning laser line sensor for 3D imaging},
    journal = {Journal of Physics: Conference Series},
    year = {2018},
    volume = {1065},
    doi = {10.1088/1742-6596/1065/14/142006},
    }
  • J. Schlarp, E. Csencsics, and G. Schitter, Optical scanning of laser line sensors for 3D imaging, Applied Optics, vol. 57, iss. 18, p. 5242–5248, 2018.
    [BibTex] [Download]
    @Article{TUW-271204,
    author = {Schlarp, Johannes and Csencsics, Ernst and Schitter, Georg},
    title = {Optical scanning of laser line sensors for 3D imaging},
    journal = {Applied Optics},
    year = {2018},
    volume = {57},
    number = {18},
    pages = {5242--5248},
    doi = {10.1364/AO.57.005242},
    keywords = {Three-dimensional sensing; Industrial optical metrology; Optomechanics; Laser sensors; Mirrors; Optical sensing and sensors},
    }
  • E. Csencsics, S. Ito, J. Schlarp, and G. Schitter, System Integration and Control of Mechatronic Imaging Systems, in Proceedings of the IEEJ International Workshop on Sensing, Actuation, Motion Control and Optimization (SAMCON), 2018.
    [BibTex]
    @InProceedings{TUW-272942,
    author = {Csencsics, Ernst and Ito, Shingo and Schlarp, Johannes and Schitter, Georg},
    title = {System Integration and Control of Mechatronic Imaging Systems},
    booktitle = {Proceedings of the IEEJ International Workshop on Sensing, Actuation, Motion Control and Optimization (SAMCON)},
    year = {2018},
    note = {eingeladen; Vortrag: IEEJ International Workshop on Sensing, Actuation, Motion Control and Optimization (SAMCON), Tokyo (Japan); 2018-03-06 -- 2018-03-09},
    numpages = {8},
    }
  • J. Schlarp, E. Csencsics, S. Ito, and G. Schitter, Design and Evaluation of a 3D Printed Flexure for a Fast Steering Mirror, in Proceedings of the 2018 Summer Topical Meeting, Advancing Precision in Additive Manufacturing, 2018.
    [BibTex] [Download]
    @InProceedings{TUW-271207,
    author = {Schlarp, Johannes and Csencsics, Ernst and Ito, Shingo and Schitter, Georg},
    title = {Design and Evaluation of a 3D Printed Flexure for a Fast Steering Mirror},
    booktitle = {Proceedings of the 2018 Summer Topical Meeting, Advancing Precision in Additive Manufacturing},
    year = {2018},
    note = {Vortrag: ASPE and EUSPEN Summer Topical Meeting, Advancing Precision in Additive Manufacturing, Berkeley (USA); 2018-07-22 -- 2018-07-25},
    numpages = {5},
    }
  • J. Schlarp, E. Csencsics, and G. Schitter, Feature detection and scan area selection for 3D laser scanning sensors, in 2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2018.
    [BibTex] [Download]
    @InProceedings{TUW-271205,
    author = {Schlarp, Johannes and Csencsics, Ernst and Schitter, Georg},
    title = {Feature detection and scan area selection for 3D laser scanning sensors},
    booktitle = {2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics},
    year = {2018},
    note = {Vortrag: 2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Auckland (New Zealand); 2018-07-09 -- 2018-07-12},
    numpages = {6},
    doi = {10.1109/AIM.2018.8452235},
    }
  • J. Schlarp, E. Csencsics, and G. Schitter, Influence of Scheimpflug condition on measurements of a scanning laser line sensor for 3D imaging, in XXII World Congress of the International Measurement Confederation (IMEKO), 2018.
    [BibTex] [Download]
    @InProceedings{TUW-271208,
    author = {Schlarp, Johannes and Csencsics, Ernst and Schitter, Georg},
    title = {Influence of Scheimpflug condition on measurements of a scanning laser line sensor for 3D imaging},
    booktitle = {XXII World Congress of the International Measurement Confederation (IMEKO)},
    year = {2018},
    note = {Vortrag: XXII World Congress of the International Measurement Confederation (IMEKO), Belfast (UK); 2018-09-03 -- 2018-09-06},
    numpages = {4},
    }
  • E. Csencsics, M. Thier, R. Hainisch, and G. Schitter, System and Control Design of a Voice Coil Actuated Mechanically Decoupling Two-body Vibration Isolation System, IEEE/ASME Transactions on Mechatronics, vol. 23, iss. 1, 2018.
    [BibTex]
    @Article{TUW-263854,
    author = {Csencsics, Ernst and Thier, Markus and Hainisch, Reinhard and Schitter, Georg},
    title = {System and Control Design of a Voice Coil Actuated Mechanically Decoupling Two-body Vibration Isolation System},
    journal = {IEEE/ASME Transactions on Mechatronics},
    year = {2018},
    volume = {23},
    number = {1},
    doi = {10.1109/TMECH.2017.2771440},
    keywords = {Vibrations, Optimal control, System analysis and design},
    numpages = {10},
    }
  • S. Ito, M. Poik, E. Csencsics, J. Schlarp, and G. Schitter, Scanning Chromatic Confocal Sensor for Fast 3D Surface Characterization, in Proceedings of the 2018 Summer Topical Meeting, Advancing Precision in Additive Manufacturing, 2018, p. 226–231.
    [BibTex]
    @InProceedings{TUW-270906,
    author = {Ito, Shingo and Poik, Matthias and Csencsics, Ernst and Schlarp, Johannes and Schitter, Georg},
    title = {Scanning Chromatic Confocal Sensor for Fast 3D Surface Characterization},
    booktitle = {Proceedings of the 2018 Summer Topical Meeting, Advancing Precision in Additive Manufacturing},
    year = {2018},
    pages = {226--231},
    note = {Vortrag: ASPE and EUSPEN Summer Topical Meeting, Advancing Precision in Additive Manufacturing, Berkeley (USA); 2018-07-22 -- 2018-07-25},
    }

2017

  • E. Csencsics, S. Ito, M. Fuerst, F. Cigarini, and G. Schitter, Christian Doppler Laboratory Precision Engineering for Automated In-line Metrology, in 1st GMAR workshop, 2017.
    [BibTex]
    @Conference{TUW-0612172,
    author = {Csencsics, E. and Ito, S. and Fuerst, M. and Cigarini, F. and Schitter, G.},
    title = {Christian Doppler Laboratory Precision Engineering for Automated In-line Metrology},
    booktitle = {1st GMAR workshop},
    year = {2017},
    }
  • E. Csencsics and G. Schitter, System Design and Control of a Resonant Fast Steering Mirror for Lissajous-based Scanning, IEEE/ASME Transactions on Mechatronics, vol. 22, iss. 5, pp. 1963-1972, 2017.
    [BibTex]
    @Article{TUW041020172,
    author = {Csencsics, E. and Schitter, G.},
    title = {System Design and Control of a Resonant Fast Steering Mirror for Lissajous-based Scanning},
    journal = {IEEE/ASME Transactions on Mechatronics},
    year = {2017},
    volume = {22},
    number = {5},
    pages = {1963-1972},
    doi = {10.1109/TMECH.2017.2722578},
    }
  • E. Csencsics and G. Schitter, Parametric PID Controller Tuning for a Fast Steering Mirror, in Proceedings of the 1st IEEE Conference on Control Technology and Applications (CCTA2017), 2017.
    [BibTex]
    @InProceedings{TUW041020174,
    author = {Csencsics, E. and Schitter, G.},
    title = {Parametric PID Controller Tuning for a Fast Steering Mirror},
    booktitle = {Proceedings of the 1st IEEE Conference on Control Technology and Applications (CCTA2017)},
    year = {2017},
    }
  • E. Csencsics and G. Schitter, Design of a phase-locked-loop-based control scheme for Lissajous-trajectory scanning of fast steering mirrors, in Proceedings of the American Control Conference (ACC2017), 2017.
    [BibTex]
    @InProceedings{TUW-041020175,
    author = {Csencsics, E. and Schitter, G.},
    title = {Design of a phase-locked-loop-based control scheme for Lissajous-trajectory scanning of fast steering mirrors},
    booktitle = {Proceedings of the American Control Conference (ACC2017)},
    year = {2017},
    doi = {10.23919/ACC.2017.7963176},
    }
  • E. Csencsics and G. Schitter, Mechatronisches Design und Regelung eines 2D Kippspiegelsystems, in 51. Regelungstechnisches Kolloquium, 2017.
    [BibTex]
    @Conference{TUW-041020176,
    author = {Csencsics, E. and Schitter, G.},
    title = {Mechatronisches Design und Regelung eines 2D Kippspiegelsystems},
    booktitle = {51. Regelungstechnisches Kolloquium},
    year = {2017},
    }
  • E. Csencsics, J. Schlarp, and G. Schitter, Bandwidth extension of hybrid-reluctance-force-based tip/tilt system by reduction of eddy currents, in Proceedings of the 2017 IEEE International Conference on Advanced Intelligent Mechatronics (AIM2017), 2017, pp. 1167-1172.
    [BibTex]
    @InProceedings{TUW041020173,
    author = {Csencsics, E. and Schlarp, J. and Schitter, G.},
    title = {Bandwidth extension of hybrid-reluctance-force-based tip/tilt system by reduction of eddy currents},
    booktitle = {Proceedings of the 2017 IEEE International Conference on Advanced Intelligent Mechatronics (AIM2017)},
    year = {2017},
    pages = {1167-1172},
    doi = {10.1109/AIM.2017.8014176},
    }
  • E. Csencsics, M. Thier, R. Hainisch, and G. Schitter, System and Control Design of a Voice Coil Actuated Mechanically Decoupling Two-body Vibration Isolation System, IEEE/ASME Transactions on Mechatronics, vol. 23, iss. 1, pp. 321-330, 2017.
    [BibTex]
    @Article{TUW061217,
    author = {Csencsics, E. and Thier, M. and Hainisch, R. and Schitter, G.},
    title = {System and Control Design of a Voice Coil Actuated Mechanically Decoupling Two-body Vibration Isolation System},
    journal = {IEEE/ASME Transactions on Mechatronics},
    year = {2017},
    volume = {23},
    number = {1},
    pages = {321-330},
    doi = {10.1109/TMECH.2017.2771440},
    }

2016

  • F. Cigarini, E. Csencsics, R. Saathof, and G. Schitter, Design of Tuneable Damping for Precision Positioning of a Two-Body System, in Proceedings of the 7th IFAC Symposium on Mechatronic Systems, 2016, p. 222–227.
    [BibTex]
    @InProceedings{TUW-251116,
    author = {Cigarini, Francesco and Csencsics, Ernst and Saathof, Rudolf and Schitter, Georg},
    title = {Design of Tuneable Damping for Precision Positioning of a Two-Body System},
    booktitle = {Proceedings of the 7th IFAC Symposium on Mechatronic Systems},
    year = {2016},
    pages = {222--227},
    note = {Posterpr{\"a}sentation: 7th IFAC Symposium on Mechatronic Systems {\&} 15th Mechatronics Forum International Conference, Loughborough (Vereinigte K{\"o}nigreich); 2016-09-05 -- 2016-09-08},
    doi = {10.1016/j.ifacol.2016.10.554},
    keywords = {Two-body systems, precision positioning, damping},
    }
  • E. Csencsics, R. Saathof, and G. Schitter, Design of a Dual-Tone Controller for Lissajous-based Scanning of Fast Steering Mirrors, in Proceeding of the 2016 American Control Conference, 2016, p. 461–466.
    [BibTex]
    @InProceedings{TUW-251547,
    author = {Csencsics, Ernst and Saathof, Rudolf and Schitter, Georg},
    title = {Design of a Dual-Tone Controller for Lissajous-based Scanning of Fast Steering Mirrors},
    booktitle = {Proceeding of the 2016 American Control Conference},
    year = {2016},
    pages = {461--466},
    note = {Vortrag: American Control Conference 2016, Boston (USA); 2016-07-06 -- 2016-07-08},
    doi = {10.1109/ACC.2016.7524957},
    }
  • E. Csencsics, M. Thier, P. Siegl, and G. Schitter, Mechatronic Design of an Active Two-body Vibration Isolation System, in Proceedings of the 7th IFAC Symposium on Mechatronic Systems, 2016, p. 133–140.
    [BibTex]
    @InProceedings{TUW-251120,
    author = {Csencsics, Ernst and Thier, Markus and Siegl, Philipp and Schitter, Georg},
    title = {Mechatronic Design of an Active Two-body Vibration Isolation System},
    booktitle = {Proceedings of the 7th IFAC Symposium on Mechatronic Systems},
    year = {2016},
    pages = {133--140},
    note = {Vortrag: 7th IFAC Symposium on Mechatronic Systems {\&} 15th Mechatronics Forum International Conference, Loughborough (Vereinigte K{\"o}nigreich); 2016-09-05 -- 2016-09-08},
    doi = {10.1016/j.ifacol.2016.10.532},
    keywords = {Vibration isolation, Systems design, Mechanical decoupling, PID controllers, Reduced energy consumption},
    }

2015

  • M. Thier, R. Saathof, E. Csencsics, R. Hainisch, A. Sinn, and G. Schitter, Entwurf und Regelung eines Positioniersystems für robotergestützte Nanomesstechnik, at – Automatisierungstechnik, vol. 63, p. 727–738, 2015.
    [BibTex]
    @Article{TUW-242211,
    author = {Thier, Markus and Saathof, Rudolf and Csencsics, Ernst and Hainisch, Reinhard and Sinn, Andreas and Schitter, Georg},
    title = {Entwurf und Regelung eines Positioniersystems f{\"u}r robotergest{\"u}tzte Nanomesstechnik},
    journal = {at - Automatisierungstechnik},
    year = {2015},
    volume = {63},
    pages = {727--738},
    doi = {10.1515/auto-2015-0044},
    keywords = {In-Prozess-Messtechnik, Pr{\"a}zisionspositionierung, Pr{\"a}zisionsmesstechnik, Instrumentierung.},
    }

2014

  • E. Csencsics, Development of a Fast Steering Mirror, 2014.
    [BibTex]
    @MastersThesis{TUW-227365,
    author = {Csencsics, Ernst},
    title = {Development of a Fast Steering Mirror},
    school = {E370},
    year = {2014},
    }