Publikationen AMS

Zeitschriftenbeiträge | Konferenzbeiträge | Bücher und Buchbeiträge

Zeitschriftenbeträge

2018

  • M. Bibl, R. Stein, E. Döberl, and G. Schitter, Rotierender optischer Positions- und Winkelsensor, e & i Elektrotechnik und Informationstechnik, pp. 396-400, 2018.
    [BibTex]
    @Article{TUW-121018,
    Title = {Rotierender optischer Positions- und Winkelsensor},
    Author = {Bibl, M. and Stein, R. and D\"{o}berl, E. and Schitter, G.},
    Journal = {e \& i Elektrotechnik und Informationstechnik},
    Year = {2018},
    Pages = {396-400},
    }
  • S. Ito and G. Schitter, Atomic force microscopy capable of vibration isolation with low-stiffness Z-axis actuation, Ultramicroscopy, vol. 186, pp. 9-17, 2018.
    [BibTex]
    @Article{TUW_1804182,
    Title = {Atomic force microscopy capable of vibration isolation with low-stiffness Z-axis actuation},
    Author = {Ito, S. and Schitter, G.},
    Journal = {Ultramicroscopy},
    Year = {2018},
    Pages = {9-17},
    Volume = {186},
    Doi = {10.1016/j.ultramic.2017.12.007},
    }
  • S. Ito, S. Troppmair, B. Lindner, and F. Cigarini, Long-range Fast Nanopositioner Using Nonlinearities of Hybrid Reluctance Actuator for Energy Efficiency, IEEE Transactions on Industrial Electronics, 2018.
    [BibTex]
    @Article{TUW-2108185,
    Title = {Long-range Fast Nanopositioner Using Nonlinearities of Hybrid Reluctance Actuator for Energy Efficiency},
    Author = {Ito, S. and Troppmair, S. and Lindner, B. and Cigarini, F.},
    Journal = {IEEE Transactions on Industrial Electronics},
    Year = {2018},
    Doi = {10.1109/TIE.2018.2842735},
    }
  • P. Mesquida, D. Kohl, A. O. G., P. J. Thurner, M. Dauer, B. S., and G. Schitter, Evaluation of surface charge shift of collagen fibrils exposed to glutaraldehyde, Scientific Reports, vol. 8:10126, pp. 1-7, 2018.
    [BibTex]
    @Article{TUW-2008189,
    Title = {Evaluation of surface charge shift of collagen fibrils exposed to glutaraldehyde},
    Author = {Mesquida, P. and Kohl, D. and Andriotis O. G. and Thurner, P. J. and Dauer, M. and Bansode S. and Schitter, G.},
    Journal = {Scientific Reports},
    Year = {2018},
    Pages = {1-7},
    Volume = {8:10126},
    Doi = {10.1038/s41598-018-28293-1},
    }
  • T. Riel, R. Saathof, A. Katalenic, S. Ito, and G. Schitter, Noise analysis and efficiency improvement of a pulse-width modulated permanent magnet synchronous motor by dynamic error budgeting, Mechatronics, vol. 50, pp. 225-233, 2018.
    [BibTex]
    @Article{TUW-211117,
    Title = {Noise analysis and efficiency improvement of a pulse-width modulated permanent magnet synchronous motor by dynamic error budgeting},
    Author = {Riel, T. and Saathof, R. and Katalenic, A. and Ito, S. and Schitter, G.},
    Journal = {Mechatronics},
    Year = {2018},
    Pages = {225-233},
    Volume = {50},
    Doi = {10.1016/j.mechatronics.2017.10.006},
    }
  • J. Schlarp, E. K. Csencsics, and G. Schitter, Optical scanning of laser line sensors for 3D imaging, Applied Optics, vol. 57, iss. 18, pp. 5242-5248, 2018.
    [BibTex]
    @Article{TUW-2108181,
    Title = {Optical scanning of laser line sensors for 3D imaging},
    Author = {Schlarp, J. and Csencsics, E. K. and Schitter, G.},
    Journal = {Applied Optics},
    Year = {2018},
    Number = {18},
    Pages = {5242-5248},
    Volume = {57},
    Doi = {10.1364/AO.57.005242},
    }

2017

  • E. K. Csencsics and G. Schitter, System Design and Control of a Resonant Fast Steering Mirror for Lissajous-based Scanning, IEEE/ASME Transactions on Mechatronics, vol. 22, iss. 5, pp. 1963-1972, 2017.
    [BibTex]
    @Article{TUW041020172,
    Title = {System Design and Control of a Resonant Fast Steering Mirror for Lissajous-based Scanning},
    Author = {Csencsics, E. K. and Schitter, G.},
    Journal = {IEEE/ASME Transactions on Mechatronics},
    Year = {2017},
    Number = {5},
    Pages = {1963-1972},
    Volume = {22},
    Doi = {10.1109/TMECH.2017.2722578},
    }
  • E. K. Csencsics, M. Thier, R. Hainisch, and G. Schitter, System and Control Design of a Voice Coil Actuated Mechanically Decoupling Two-body Vibration Isolation System, IEEE/ASME Transactions on Mechatronics, vol. 23, iss. 1, pp. 321-330, 2017.
    [BibTex]
    @Article{TUW061217,
    Title = {System and Control Design of a Voice Coil Actuated Mechanically Decoupling Two-body Vibration Isolation System},
    Author = {Csencsics, E. K. and Thier, M. and Hainisch, R. and Schitter, G.},
    Journal = {IEEE/ASME Transactions on Mechatronics},
    Year = {2017},
    Number = {1},
    Pages = {321-330},
    Volume = {23},
    Doi = {10.1109/TMECH.2017.2771440},
    }
  • M. W. Hofmair, M. Melik-Merkumians, M. Böck, M. Merdan, G. Schitter, and A. Kugi, Patching process optimization in an agent-controlled timber mill, Journal of Intelligent Manufacturing, vol. 28, iss. 1, p. 69–84, 2017.
    [BibTex]
    @Article{TUW-256353,
    Title = {Patching process optimization in an agent-controlled timber mill},
    Author = {Hofmair, Matthias W. and Melik-Merkumians, Martin and B{\"o}ck, Martin and Merdan, Munir and Schitter, Georg and Kugi, Andreas},
    Journal = {Journal of Intelligent Manufacturing},
    Year = {2017},
    Number = {1},
    Pages = {69--84},
    Volume = {28},
    Doi = {10.1007/s10845-014-0962-z}
    }
  • S. Ito, S. Unger, and G. Schitter, Vibration isolator carrying atomic force microscope’s head, Mechatronics, vol. 44, p. 32–41, 2017.
    [BibTex]
    @Article{TUW-259386,
    Title = {Vibration isolator carrying atomic force microscope's head},
    Author = {Ito, Shingo and Unger, Severin and Schitter, Georg},
    Journal = {Mechatronics},
    Year = {2017},
    Pages = {32--41},
    Volume = {44},
    Doi = {10.1016/j.mechatronics.2017.04.008}
    }
  • D. Kohl, C. Kerschner, and G. Schitter, Active damping by Q-control for fast force-distance curve measurements in atomic force microscopy, Review of Scientific Instruments, vol. 88, p. 123711, 2017.
    [BibTex]
    @Article{TUW-0712172,
    Title = {Active damping by Q-control for fast force-distance curve measurements in atomic force microscopy},
    Author = {Kohl, D. and Kerschner, C. and Schitter, G.},
    Journal = {Review of Scientific Instruments},
    Year = {2017},
    Pages = {123711},
    Volume = {88},
    Doi = {10.1063/1.4991604},
    }
  • D. Kohl, P. Mesquida, and G. Schitter, Quantitative AC – Kelvin Probe Force Microscopy, Microelectronic Engineering, vol. 176, pp. 28-32, 2017.
    [BibTex]
    @Article{TUW-0712173,
    Title = {Quantitative AC - Kelvin Probe Force Microscopy},
    Author = {Kohl, D. and Mesquida, P. and Schitter, G.},
    Journal = {Microelectronic Engineering},
    Year = {2017},
    Pages = {28-32},
    Volume = {176},
    Doi = {10.1016/j.mee.2017.01.005},
    }
  • R. Saathof, M. Thier, R. Heinisch, and G. Schitter, Integrated system and control design of a one DoF nano-metrology platform, Mechatronics, vol. 47, pp. 88-96, 2017.
    [BibTex]
    @Article{TUW-20170925,
    Title = {Integrated system and control design of a one DoF nano-metrology platform},
    Author = {Saathof, R. and Thier, M. and Heinisch, R. and Schitter, G.},
    Journal = {Mechatronics},
    Year = {2017},
    Pages = {88-96},
    Volume = {47},
    Doi = {10.1016/j.mechatronics.2017.08.013},
    }

2016

  • S. Ito and G. Schitter, Comparison and Classification of High-precision Actuators Based on Stiffness Influencing Vibration Isolation, IEEE/ASME Transactions on Mechatronics, vol. 21(2), 2016.
    [BibTex]
    @Article{TUW-241933,
    Title = {Comparison and Classification of High-precision Actuators Based on Stiffness Influencing Vibration Isolation},
    Author = {Ito, Shingo and Schitter, Georg},
    Journal = {IEEE/ASME Transactions on Mechatronics},
    Year = {2016},
    Volume = {21(2)},
    Doi = {10.1109/TMECH.2015.2478658},
    Keywords = {Motion control, actuators, vibrations},
    Numpages = {10}
    }
  • S. Nahar, A. Schmets, G. Schitter, and A. Scarpas, Quantifying the Thermomechanical Response of Bitumen from Microphase Properties, Transportation Research Record, vol. 2574, p. 1–17, 2016.
    [BibTex]
    @Article{TUW-254679,
    Title = {Quantifying the Thermomechanical Response of Bitumen from Microphase Properties},
    Author = {Nahar, Sayeda and Schmets, Alexander and Schitter, Georg and Scarpas, Athanasios},
    Journal = {Transportation Research Record},
    Year = {2016},
    Pages = {1--17},
    Volume = {2574},
    Doi = {10.3141/2574-11}
    }
  • R. Paris, M. Melik-Merkumians, and G. Schitter, Probabilistic absolute position sensor based on objective laser speckles, IEEE Transactions on Instrumentation and Measurement, IEEE Transactions on Instrumentation and Measurement, vol. 65, iss. 5, p. 1188–1196, 2016.
    [BibTex]
    @Article{TUW-251540,
    Title = {Probabilistic absolute position sensor based on objective laser speckles, IEEE Transactions on Instrumentation and Measurement},
    Author = {Paris, Ren{\'e} and Melik-Merkumians, Martin and Schitter, Georg},
    Journal = {IEEE Transactions on Instrumentation and Measurement},
    Year = {2016},
    Number = {5},
    Pages = {1188--1196},
    Volume = {65},
    Doi = {10.1109/TIM.2016.2526741},
    Keywords = {Optical position measurement, particle filters (PFs), position measurement, sensor systems, speckle.}
    }
  • H. W. Yoo, S. Ito, and G. Schitter, High Speed Laser Scanning Microscopy by Iterative Learning Control of a Galvanometer Scanner, Control Engineering Practice, vol. 50, p. 12–21, 2016.
    [BibTex]
    @Article{TUW-248268,
    Title = {High Speed Laser Scanning Microscopy by Iterative Learning Control of a Galvanometer Scanner},
    Author = {Yoo, Han Woong and Ito, Shingo and Schitter, Georg},
    Journal = {Control Engineering Practice},
    Year = {2016},
    Pages = {12--21},
    Volume = {50},
    Doi = {10.1016/j.conengprac.2016.02.007},
    Keywords = {Iterative learning control, galvanometer scanner, non-minimum phase zeros, scanning laser microscopy, precision motion control}
    }

2015

  • S. Ito, J. Steininger, and G. Schitter, Low-stiffness Dual Stage Actuator for Long Rage Positioning with Nanometer Resolution, Mechatronics, vol. 29, p. 46–56, 2015.
    [BibTex]
    @Article{TUW-240765,
    Title = {Low-stiffness Dual Stage Actuator for Long Rage Positioning with Nanometer Resolution},
    Author = {Ito, Shingo and Steininger, J{\"u}rgen and Schitter, Georg},
    Journal = {Mechatronics},
    Year = {2015},
    Pages = {46--56},
    Volume = {29},
    Doi = {10.1016/j.mechatronics.2015.05.007}
    }
  • G. Schitter, Mess-, Automatisierungs- und Robotertechnik, E&I Elektrotechnik und Informationstechnik, vol. 132, iss. 4-5, p. 189–190, 2015.
    [BibTex]
    @Article{TUW-240220,
    Title = {Mess-, Automatisierungs- und Robotertechnik},
    Author = {Schitter, Georg},
    Journal = {E{\&}I Elektrotechnik und Informationstechnik},
    Year = {2015},
    Number = {4-5},
    Pages = {189--190},
    Volume = {132},
    Doi = {10.1007/s00502-015-0310-9}
    }
  • J. Steininger, M. Bibl, H. W. Yoo, and G. Schitter, High bandwidth deflection readout for atomic force microscopes, Review of Scientific Instruments, vol. 86, 2015.
    [BibTex]
    @Article{TUW-242622,
    Title = {High bandwidth deflection readout for atomic force microscopes},
    Author = {Steininger, J{\"u}rgen and Bibl, Matthias and Yoo, Han Woong and Schitter, Georg},
    Journal = {Review of Scientific Instruments},
    Year = {2015},
    Volume = {86},
    Doi = {10.1063/1.4932188}
    }
  • M. Thier, R. Saathof, E. K. Csencsics, R. Hainisch, A. Sinn, and G. Schitter, Entwurf und Regelung eines Positioniersystems für robotergestützte Nanomesstechnik, at – Automatisierungstechnik, vol. 63, p. 727–738, 2015.
    [BibTex]
    @Article{TUW-242211,
    Title = {Entwurf und Regelung eines Positioniersystems f{\"u}r robotergest{\"u}tzte Nanomesstechnik},
    Author = {Thier, Markus and Saathof, Rudolf and Csencsics, Ernst Karl and Hainisch, Reinhard and Sinn, Andreas and Schitter, Georg},
    Journal = {at - Automatisierungstechnik},
    Year = {2015},
    Pages = {727--738},
    Volume = {63},
    Doi = {10.1515/auto-2015-0044},
    Keywords = {In-Prozess-Messtechnik, Pr{\"a}zisionspositionierung, Pr{\"a}zisionsmesstechnik, Instrumentierung.}
    }

2014

  • M. W. Hofmair, M. Melik-Merkumians, M. Böck, M. Merdan, G. Schitter, and A. Kugi, Patching process optimization in an agent-controlled timber mill, Journal of Intelligent Manufacturing, vol. September, 2014.
    [BibTex]
    @Article{TUW-233010,
    Title = {Patching process optimization in an agent-controlled timber mill},
    Author = {Hofmair, Matthias W. and Melik-Merkumians, Martin and B{\"o}ck, Martin and Merdan, Munir and Schitter, Georg and Kugi, Andreas},
    Journal = {Journal of Intelligent Manufacturing},
    Year = {2014},
    Volume = {September},
    Doi = {10.1007/s10845-014-0962-z},
    Keywords = {Wood patching robot, Patch placement, Polygon covering, Path planning, Traveling salesman problem, Trajectory generation, Agent technology},
    Numpages = {16}
    }
  • S. Nahar, A. Schmets, A. Scarpas, and G. Schitter, Microstructural changes in bitumen at the onset of crack formation, European Polymer Journal, vol. 56, p. 17–25, 2014.
    [BibTex]
    @Article{TUW-228466,
    Title = {Microstructural changes in bitumen at the onset of crack formation},
    Author = {Nahar, Sayeda and Schmets, Alexander and Scarpas, Athanasios and Schitter, Georg},
    Journal = {European Polymer Journal},
    Year = {2014},
    Pages = {17--25},
    Volume = {56},
    Doi = {10.1016/j.eurpolymj.2014.04.007},
    Keywords = {Bitumen, Microstructure, Onset of microscale damage, Microcrack morphology, Crack propagation, Atomic force microscopy}
    }
  • H. W. Yoo, M. E. van Royen, W. A. van Cappellen, A. B. Houtsmuller, M. Verhaegen, and G. Schitter, Automated Spherical Aberration Correction in Scanning Confocal Microscopy, Review of Scientific Instruments, vol. 85, iss. 123706, p. 1–9, 2014.
    [BibTex]
    @Article{TUW-235868,
    Title = {Automated Spherical Aberration Correction in Scanning Confocal Microscopy},
    Author = {Yoo, Han Woong and van Royen, Martin E. and van Cappellen, Wiggert A. and Houtsmuller, Adriaan B. and Verhaegen, Michel and Schitter, Georg},
    Journal = {Review of Scientific Instruments},
    Year = {2014},
    Number = {123706},
    Pages = {1--9},
    Volume = {85},
    Doi = {10.1063/1.4904370},
    Keywords = {Coverslip correction collar, spherical aberration, confocal laser scanning microscope, aberartion correction}
    }

2013

  • S. Kuiper, P. M. J. Van den Hof, and G. Schitter, Integrated designof the feedback controller and topography estimator for atomic force microscopy, Control Engineering Practice, vol. 21, p. 1110–1120, 2013.
    [BibTex]
    @Article{TUW-223135,
    Title = {Integrated designof the feedback controller and topography estimator for atomic force microscopy},
    Author = {Kuiper, Stefan and Van den Hof, Paul M. J. and Schitter, Georg},
    Journal = {Control Engineering Practice},
    Year = {2013},
    Pages = {1110--1120},
    Volume = {21},
    Doi = {10.1016/j.conengprac.2013.03.006}
    }
  • S. Nahar, M. Mohajeri, A. Schmets, A. Scarpas, V. V. de Martin, and G. Schitter, First observation of the blending zone morphology at the interface of reclaimed asphalt binder and virgin bitumen, Transportation Research Record, vol. 2370, iss. 1, p. 1–9, 2013.
    [BibTex]
    @Article{TUW-224181,
    Title = {First observation of the blending zone morphology at the interface of reclaimed asphalt binder and virgin bitumen},
    Author = {Nahar, Sayeda and Mohajeri, Mohamad and Schmets, Alexander and Scarpas, Athanasios and Martin, Van de Ven and Schitter, Georg},
    Journal = {Transportation Research Record},
    Year = {2013},
    Number = {1},
    Pages = {1--9},
    Volume = {2370},
    Doi = {10.3141/2370-01}
    }
  • S. Nahar, A. Schmets, A. Scarpas, and G. Schitter, Temperature and thermal history dependence of the microstructure in bituminous materials, European Polymer Journal, vol. 49, iss. 8, p. 1964–1974, 2013.
    [BibTex]
    @Article{TUW-222466,
    Title = {Temperature and thermal history dependence of the microstructure in bituminous materials},
    Author = {Nahar, Sayeda and Schmets, Alexander and Scarpas, Athanasios and Schitter, Georg},
    Journal = {European Polymer Journal},
    Year = {2013},
    Number = {8},
    Pages = {1964--1974},
    Volume = {49},
    Doi = {10.1016/j.eurpolymj.2013.03.027}
    }
  • R. M. Oldenbeuving, H. Song, G. Schitter, M. Verhaegen, E. J. Klein, C. J. Lee, H. L. Offerhaus, and K. Boller, High precision wavelength estimation method for integrated optics, Optics Express, vol. 21, iss. 14, 2013.
    [BibTex]
    @Article{TUW-2224222,
    Title = {High precision wavelength estimation method for integrated optics},
    Author = {Oldenbeuving, Ruud M. and Song, Hong and Schitter, Georg and Verhaegen, Michel and Klein, Edwin Jan and Lee, Chris J. and Offerhaus, Herman L. and Boller, Klaus-J.},
    Journal = {Optics Express},
    Year = {2013},
    Number = {14},
    Volume = {21},
    Doi = {10.1364/OE.21.017042},
    Numpages = {11}
    }
  • M. Thier, R. Paris, T. Thurner, and G. Schitter, Low-Latency Shack Hartmann Wavefront Sensor Based on an Industrial Smart Camera, IEEE Transactions on Instrumentation and Measurement, vol. 62, iss. 5, p. 1241–1249, 2013.
    [BibTex]
    @Article{TUW-222517,
    Title = {Low-Latency Shack Hartmann Wavefront Sensor Based on an Industrial Smart Camera},
    Author = {Thier, Markus and Paris, Ren{\'e} and Thurner, Thomas and Schitter, Georg},
    Journal = {IEEE Transactions on Instrumentation and Measurement},
    Year = {2013},
    Number = {5},
    Pages = {1241--1249},
    Volume = {62},
    Doi = {10.1109/TIM.2012.2223333},
    Keywords = {Algorithms, cameras, field-programmable gate arrays (FPGAs), image sensors, optical distortion.}
    }

2012

  • J. R. van Hulzen, G. Schitter, P. M. J. Van den Hof, and J. van Eijk, Dynamics, load balancing, and modal control of piezoelectric tube actuators, Mechatronics, vol. 22, iss. 3, 2012.
    [BibTex]
    @Article{TUW-201741,
    Title = {Dynamics, load balancing, and modal control of piezoelectric tube actuators},
    Author = {van Hulzen, Jan R. and Schitter, Georg and Van den Hof, Paul M. J. and van Eijk, Jan},
    Journal = {Mechatronics},
    Year = {2012},
    Number = {3},
    Volume = {22},
    Doi = {10.1016/j.mechatronics.2011.10.003},
    Numpages = {12}
    }
  • D. Kohl, G. Schitter, and U. Staufer, The potential of magnetic force microscopy for in-situ investigation of nanophase iron in lunar dust, Planetary and Space Science, vol. 74, iss. 1, p. 270–275, 2012.
    [BibTex]
    @Article{TUW-214997,
    Title = {The potential of magnetic force microscopy for in-situ investigation of nanophase iron in lunar dust},
    Author = {Kohl, Dominik and Schitter, Georg and Staufer, Urs},
    Journal = {Planetary and Space Science},
    Year = {2012},
    Number = {1},
    Pages = {270--275},
    Volume = {74},
    Doi = {10.1016/j.pss.2012.06.013},
    Keywords = {Magnetic force microscopy; Nanophase iron; Nanophase iron oxide; Lunar dust}
    }
  • S. Kuiper and G. Schitter, Model-Based Feedback Controller Design for Dual Actuated Atomic Force Microscopy Mechatronics, Mechatronics, vol. 22, iss. 3, p. 327–337, 2012.
    [BibTex]
    @Article{TUW-202100,
    Title = {Model-Based Feedback Controller Design for Dual Actuated Atomic Force Microscopy Mechatronics},
    Author = {Kuiper, Stefan and Schitter, Georg},
    Journal = {Mechatronics},
    Year = {2012},
    Number = {3},
    Pages = {327--337},
    Volume = {22},
    Doi = {10.1016/j.mechatronics.2011.08.003}
    }
  • M. Merdan, A. Zoitl, G. Koppensteiner, and M. Melik-Merkumians, Adaptive Produktionssysteme durch den Einsatz von autonomen Softwareagenten, E&I Elektrotechnik und Informationstechnik, vol. 129, 2012.
    [BibTex]
    @Article{TUW-031020178,
    Title = {Adaptive Produktionssysteme durch den Einsatz von autonomen Softwareagenten},
    Author = {Merdan, M. and Zoitl, A. and Koppensteiner, G. and Melik-Merkumians, M.},
    Journal = {E\&I Elektrotechnik und Informationstechnik},
    Year = {2012},
    Volume = {129},
    Url = {https://link.springer.com/article/10.1007/s00502-012-0071-7}
    }
  • R. Paris, T. Thurner, T. Berndorfer, H. W. Yoo, and G. Schitter, Intelligente Kameras in der Messtechnik, E&I Elektrotechnik und Informationstechnik, vol. 129, iss. 1, p. 34–41, 2012.
    [BibTex]
    @Article{TUW-207883,
    Title = {Intelligente Kameras in der Messtechnik},
    Author = {Paris, Ren{\'e} and Thurner, Thomas and Berndorfer, Thomas and Yoo, Han Woong and Schitter, Georg},
    Journal = {E{\&}I Elektrotechnik und Informationstechnik},
    Year = {2012},
    Number = {1},
    Pages = {34--41},
    Volume = {129},
    Doi = {10.1007/s00502-012-0069-1},
    Keywords = {smart cameras; wavefront-sensor; adaptive optics; speckle-metrology}
    }
  • G. Schitter and A. Sebastian, Editorial Special issue on “Mechatronic systems for micro- and nanoscale applications”, Mechatronics, vol. 22, p. 239–240, 2012.
    [BibTex]
    @Article{TUW-207884,
    Title = {Editorial Special issue on ``Mechatronic systems for micro- and nanoscale applications''},
    Author = {Schitter, Georg and Sebastian, Abu},
    Journal = {Mechatronics},
    Year = {2012},
    Pages = {239--240},
    Volume = {22},
    Doi = {10.1016/j.mechatronics.2012.02.004}
    }
  • G. Schitter, J. Steininger, F. C. A. Heuck, and U. Staufer, Towards fast AFM-based nanometrology and nanomanufacturing, International Journal of Nanomanufacturing, vol. 8, iss. 5/6, p. 392–418, 2012.
    [BibTex]
    @Article{TUW-212559,
    Title = {Towards fast AFM-based nanometrology and nanomanufacturing},
    Author = {Schitter, Georg and Steininger, J{\"u}rgen and Heuck, Friedjof C.A. and Staufer, Urs},
    Journal = {International Journal of Nanomanufacturing},
    Year = {2012},
    Number = {5/6},
    Pages = {392--418},
    Volume = {8},
    Doi = {10.1504/IJNM.2012.051109},
    Keywords = {nanometrology; nanomanufacturing; atomic force microscope; AFM; nanolithography.}
    }
  • J. Steininger, S. Kuiper, S. Ito, and G. Schitter, Schnelle Rasterkraftmikroskopie durch moderne Regelungstechnik und mechatronische Systemintegration, E&I Elektrotechnik und Informationstechnik, vol. 129, iss. 1, p. 28–33, 2012.
    [BibTex]
    @Article{TUW-207882,
    Title = {Schnelle Rasterkraftmikroskopie durch moderne Regelungstechnik und mechatronische Systemintegration},
    Author = {Steininger, J{\"u}rgen and Kuiper, Stefan and Ito, Shingo and Schitter, Georg},
    Journal = {E{\&}I Elektrotechnik und Informationstechnik},
    Year = {2012},
    Number = {1},
    Pages = {28--33},
    Volume = {129},
    Doi = {10.1007/s00502-012-0070-8},
    Keywords = {SPM; AFM; scanning probe; control; nanotechnology; nanometrology}
    }

2011

  • S. Biffl, A. Zoitl, and H. Steininger, Kollaboratives Engineering vereinfachen, all-electronics.de, vol. 1, 2011.
    [BibTex]
    @Article{TUW-200257,
    Title = {Kollaboratives Engineering vereinfachen},
    Author = {Biffl, Stefan and Zoitl, Alois and Steininger, Heinrich},
    Journal = {all-electronics.de},
    Year = {2011},
    Volume = {1},
    }
  • S. Biffl, A. Zoitl, and H. Steininger, Integration ist alles, IEE Elektrische Automatisierung + Antriebstechnik, vol. 56, iss. 11, p. 42–44, 2011.
    [BibTex]
    @Article{TUW-200963,
    Title = {Integration ist alles},
    Author = {Biffl, Stefan and Zoitl, Alois and Steininger, Heinrich},
    Journal = {IEE Elektrische Automatisierung + Antriebstechnik},
    Year = {2011},
    Number = {11},
    Pages = {42--44},
    Volume = {56},
    }
  • R. Jungmann, M. E. Szabo, G. Schitter, R. Y. Tang, D. Vashishth, P. K. Hansma, and P. J. Thurner, Local strain and damage mapping in single trabeculae during three-point bending tests, Journal of the Mechanical Behavior of Biomedical Materials, vol. 4, iss. 4, 2011.
    [BibTex]
    @Article{TUW-193273,
    Title = {Local strain and damage mapping in single trabeculae during three-point bending tests},
    Author = {Jungmann, Ralf and Szabo, Margaret Elizabeth and Schitter, Georg and Tang, Raymond Yue-Sing and Vashishth, Deepak and Hansma, Paul K. and Thurner, Phillip J.},
    Journal = {Journal of the Mechanical Behavior of Biomedical Materials},
    Year = {2011},
    Number = {4},
    Volume = {4},
    Doi = {10.1016/j.jmbbm.2010.12.009},
    Keywords = {Trabecular bone, Local strain detection, Damage model, Whitening Microdamage},
    Numpages = {11}
    }
  • W. Lepuschitz, A. Zoitl, M. Vallee, and M. Merdan, Toward Self-Reconfiguration of Manufacturing Systems Using Automation Agents, IEEE Transactions on Systems, Man, and Cybernetics, Part C: Applications and Reviews, vol. 41, iss. 1, p. 52–69, 2011.
    [BibTex]
    @Article{TUW-190986,
    Title = {Toward Self-Reconfiguration of Manufacturing Systems Using Automation Agents},
    Author = {Lepuschitz, Wilfried and Zoitl, Alois and Vallee, Mathieu and Merdan, Munir},
    Journal = {IEEE Transactions on Systems, Man, and Cybernetics, Part C: Applications and Reviews},
    Year = {2011},
    Number = {1},
    Pages = {52--69},
    Volume = {41},
    Keywords = {Automation agent, flexible manufacturing, IEC 61499, low-level control (LLC), ontology, reconfiguration.},
    }
  • M. Merdan, M. Vallee, W. Lepuschitz, and A. Zoitl, Monitoring and diagnostics of industrial systems using automation agents, International Journal of Production Research, vol. 49, iss. 5, p. 1497–1509, 2011.
    [BibTex]
    @Article{TUW-190907,
    Title = {Monitoring and diagnostics of industrial systems using automation agents},
    Author = {Merdan, Munir and Vallee, Mathieu and Lepuschitz, Wilfried and Zoitl, Alois},
    Journal = {International Journal of Production Research},
    Year = {2011},
    Number = {5},
    Pages = {1497--1509},
    Volume = {49},
    Doi = {10.1080/00207543.2010.526368},
    Keywords = {monitoring; diagnostics; automation agent; ontology; low-level control; high-level control},
    }
  • H. Song, R. Fraanje, G. Schitter, H. Kroese, G. Vdovin, and M. Verhaegen, Model-based aberration correction in a closed-loop wavefront-sensor-less adaptive optics system, Virtual Journal for Biomedical Optics, vol. 6 Ausgabe 1, 2011.
    [BibTex]
    @Article{TUW-193413,
    Title = {Model-based aberration correction in a closed-loop wavefront-sensor-less adaptive optics system},
    Author = {Song, Hong and Fraanje, Rufus and Schitter, Georg and Kroese, Henk and Vdovin, Gleb and Verhaegen, Michel},
    Journal = {Virtual Journal for Biomedical Optics},
    Year = {2011},
    Volume = {6 Ausgabe 1},
    Doi = {doi: 10.1364/OE.18.024070},
    Numpages = {15}
    }
  • H. Song, R. Fraanje, G. Schitter, G. Vdovin, and M. Verhaegen, Controller Design for a High-Sampling-Rate Closed-Loop Adaptive Optics System with Piezo-Driven Deformable Mirror, European Journal of Control, vol. 17, iss. 3, p. 290–301, 2011.
    [BibTex]
    @Article{TUW-198529,
    Title = {Controller Design for a High-Sampling-Rate Closed-Loop Adaptive Optics System with Piezo-Driven Deformable Mirror},
    Author = {Song, Hong and Fraanje, Rufus and Schitter, Georg and Vdovin, Gleb and Verhaegen, Michel},
    Journal = {European Journal of Control},
    Year = {2011},
    Number = {3},
    Pages = {290--301},
    Volume = {17},
    Doi = {10.3166/EJC.17.290-301},
    Keywords = {Adaptive Optics, hysteresis compensation, closed-loop subspace identification, model-based controller design}
    }
  • H. Song, R. Fraanje, M. Verhaegen, G. Schitter, and G. Vdovin, ADAPTIVE OPTICS: New algorithm improves AO systems without wavefront sensors, Laser Focus World, vol. 1, 2011.
    [BibTex]
    @Article{TUW-198511,
    Title = {ADAPTIVE OPTICS: New algorithm improves AO systems without wavefront sensors},
    Author = {Song, Hong and Fraanje, Rufus and Verhaegen, Michel and Schitter, Georg and Vdovin, Gleb},
    Journal = {Laser Focus World},
    Year = {2011},
    Volume = {1},
    Url = {http://www.laserfocusworld.com/articles/2011/01/new-algorithm-improves-ao-systems-without-wavefront-sensors.html}
    }
  • T. Strasser, A. Zoitl, J. H. Christensen, and C. Sünder, Design and Execution Issues in IEC 61499 Distributed Automation and Control Systems, IEEE Transactions on Systems, Man, and Cybernetics, Part C: Applications and Reviews, vol. 41, iss. 1, p. 41–51, 2011.
    [BibTex]
    @Article{TUW-191032,
    Title = {Design and Execution Issues in IEC 61499 Distributed Automation and Control Systems},
    Author = {Strasser, Thomas and Zoitl, Alois and Christensen, James H. and S{\"u}nder, Christoph},
    Journal = {IEEE Transactions on Systems, Man, and Cybernetics, Part C: Applications and Reviews},
    Year = {2011},
    Number = {1},
    Pages = {41--51},
    Volume = {41},
    Doi = {10.1109/TSMCC.2010.2067210},
    Keywords = {Distributed control system, Holonic Manufacturing System (HMS), IEC 61499, lower level control approach},
    }

2010

  • S. Kuiper and G. Schitter, Active damping of a piezoelectric tube scanner using self-sening piezo actuation, Mechatronics, vol. 20, p. 656–665, 2010.
    [BibTex]
    @Article{TUW-189156,
    Title = {Active damping of a piezoelectric tube scanner using self-sening piezo actuation},
    Author = {Kuiper, Stefan and Schitter, Georg},
    Journal = {Mechatronics},
    Year = {2010},
    Pages = {656--665},
    Volume = {20},
    Doi = {10.1016/j.mechatronics.2010.07.003},
    Keywords = {Atomic Force Microscopy Piezoelectric actuators Self-sensing actuation}
    }
  • M. Merdan, A. Zoitl, G. Koppensteiner, and F. Demmelmayr, Semantische Technologien – Stand der Technik, Elektrotechnik und Informationstechnik (e&i), vol. 127, iss. 10, p. 291–299, 2010.
    [BibTex]
    @Article{TUW-189245,
    Title = {Semantische Technologien - Stand der Technik},
    Author = {Merdan, Munir and Zoitl, Alois and Koppensteiner, Gottfried and Demmelmayr, Florian},
    Journal = {Elektrotechnik und Informationstechnik (e{\&}i)},
    Year = {2010},
    Number = {10},
    Pages = {291--299},
    Volume = {127},
    Url = {https://link.springer.com/article/10.1007/s00502-010-0777-3}
    }
  • C. Oates and A. Zoitl, Utilizing Lego Mindstorms as a Teaching Platform for Industrial Automation, AT&P Journal plus, vol. 2, p. 74–78, 2010.
    [BibTex]
    @Article{TUW-191020,
    Title = {Utilizing Lego Mindstorms as a Teaching Platform for Industrial Automation},
    Author = {Oates, Carolyn and Zoitl, Alois},
    Journal = {AT{\&}P Journal plus},
    Year = {2010},
    Note = {eingeladen},
    Pages = {74--78},
    Volume = {2},
    Keywords = {automation; control systems; robotics},
    }
  • H. Song, R. Fraanje, G. Schitter, H. Kroese, G. Vdovin, and M. Verhaegen, Model-based aberration correction in a closed-loop wavefront-sensor-less adaptive optics system, Optics Express, vol. 18, iss. 23, 2010.
    [BibTex]
    @Article{TUW-190901,
    Title = {Model-based aberration correction in a closed-loop wavefront-sensor-less adaptive optics system},
    Author = {Song, Hong and Fraanje, Rufus and Schitter, Georg and Kroese, Henk and Vdovin, Gleb and Verhaegen, Michel},
    Journal = {Optics Express},
    Year = {2010},
    Number = {23},
    Volume = {18},
    Doi = {10.1364/OE.18.024070}
    }

2009

  • G. Schitter, Improving the speed of AFM by mechatronic design and modern control methods, TM – Technisches Messen, vol. 76, iss. 5, p. 266–273, 2009.
    [BibTex]
    @Article{TUW-269227,
    Title = {Improving the speed of AFM by mechatronic design and modern control methods},
    Author = {Schitter, Georg},
    Journal = {TM - Technisches Messen},
    Year = {2009},
    Note = {invited},
    Number = {5},
    Pages = {266--273},
    Volume = {76},
    }
  • G. Schitter and K. J. {AA}ström, Special Issue on Advanced Control Methods for Scanning Probe Microscopy, Asian Journal of Control, vol. 11, iss. 2, pp. 101-103, 2009.
    [BibTex]
    @Article{TUW-20042018,
    Title = {Special Issue on Advanced Control Methods for Scanning Probe Microscopy},
    Author = {Schitter, G. and {\AA}str{\"o}m, Karl J.},
    Journal = {Asian Journal of Control},
    Year = {2009},
    Number = {2},
    Pages = {101-103},
    Volume = {11},
    }
  • G. Schitter and K. J. {AA}ström, Special Issue on ”Advanced Control Methods for Scanning Probe Microscopy”, Asian Journal of Control, vol. 11, iss. 2, p. 101–103, 2009.
    [BibTex]
    @Article{TUW-269327,
    Title = {Special Issue on ''Advanced Control Methods for Scanning Probe Microscopy''},
    Author = {Schitter, Georg and {\AA}str{\"o}m, Karl J.},
    Journal = {Asian Journal of Control},
    Year = {2009},
    Number = {2},
    Pages = {101--103},
    Volume = {11},
    }
  • G. Schitter and M. J. Rost, Scanning probe microscopy at video-rate, Materials Today, vol. 11, iss. S1, p. 40–48, 2009.
    [BibTex]
    @Article{TUW-269233,
    Title = {Scanning probe microscopy at video-rate},
    Author = {Schitter, Georg and Rost, Marcel J.},
    Journal = {Materials Today},
    Year = {2009},
    Note = {invited},
    Number = {S1},
    Pages = {40--48},
    Volume = {11},
    }
  • H. Song, G. Vdovin, R. Fraanje, G. Schitter, and M. Verhaegen, Extracting hysteresis from nonlinear measurement of wavefront-sensor-less adaptive optics system, Optics Letters, vol. 34, p. 61–63, 2009.
    [BibTex]
    @Article{TUW-269294,
    Title = {Extracting hysteresis from nonlinear measurement of wavefront-sensor-less adaptive optics system},
    Author = {Song, Hong and Vdovin, Gleb and Fraanje, Rufus and Schitter, Georg and Verhaegen, Michel},
    Journal = {Optics Letters},
    Year = {2009},
    Pages = {61--63},
    Volume = {34},
    }
  • A. Zoitl, T. Strasser, C. Sünder, and T. Baier, Is IEC 61499 in Harmony with IEC 61131-3, IEEE Industrial Electronics Magazine, vol. 3, iss. 4, p. 49–55, 2009.
    [BibTex]
    @Article{TUW-182299,
    Title = {Is IEC 61499 in Harmony with IEC 61131-3},
    Author = {Zoitl, Alois and Strasser, Thomas and S{\"u}nder, Christoph and Baier, Thomas},
    Journal = {IEEE Industrial Electronics Magazine},
    Year = {2009},
    Number = {4},
    Pages = {49--55},
    Volume = {3},
    Doi = {10.1109/MIE.2009.934780},
    }
  • A. Zoitl and V. Vyatkin, IEC 61499 Architecture for Distributed Automation: The ”Glass Half Full” View, IEEE Industrial Electronics Magazine, vol. 3, iss. 4, p. 7–23, 2009.
    [BibTex]
    @Article{TUW-182279,
    Title = {IEC 61499 Architecture for Distributed Automation: The ''Glass Half Full'' View},
    Author = {Zoitl, Alois and Vyatkin, Valeriy},
    Journal = {IEEE Industrial Electronics Magazine},
    Year = {2009},
    Number = {4},
    Pages = {7--23},
    Volume = {3},
    Doi = {10.1109/MIE.2009.934786},
    }

2008

  • R. W. Brennan, P. Vrba, P. Tichy, A. Zoitl, C. K. Sünder, T. Strasser, and V. Marik, Developments in dynamic and intelligent reconfiguration of industrial automation, Computers in Industry, vol. 59, 2008.
    [BibTex]
    @Article{TUW-112767,
    Title = {Developments in dynamic and intelligent reconfiguration of industrial automation},
    Author = {Brennan, Robert W. and Vrba, Pavel and Tichy, Pavel and Zoitl, Alois and S{\"u}nder, Christoph Karl and Strasser, Thomas and Marik, Vladimir},
    Journal = {Computers in Industry},
    Year = {2008},
    Volume = {59},
    Doi = {10.1016/j.compind.2008.02.001},
    Numpages = {15},
    }
  • J. Fritsche, H. Steininger, C. K. Sünder, and A. Zoitl, Kein Entweder-Oder!, Computer&Automation, vol. Control Guide S2, p. 16–21, 2008.
    [BibTex]
    @Article{TUW-165499,
    Title = {Kein Entweder-Oder!},
    Author = {Fritsche, Josef and Steininger, Heinrich and S{\"u}nder, Christoph Karl and Zoitl, Alois},
    Journal = {Computer{\&}Automation},
    Year = {2008},
    Pages = {16--21},
    Volume = {Control Guide S2},
    }
  • G. Schitter, P. J. Thurner, and P. K. Hansma, Design and input-shaping control of a novel scanner for high speed atomic force microscopy, Mechatronics, vol. 18, p. 282–288, 2008.
    [BibTex]
    @Article{TUW-269234,
    Title = {Design and input-shaping control of a novel scanner for high speed atomic force microscopy},
    Author = {Schitter, Georg and Thurner, Philipp J. and Hansma, Paul K.},
    Journal = {Mechatronics},
    Year = {2008},
    Pages = {282--288},
    Volume = {18},
    Keywords = {AFM; Fast scanning; Nano-positioning; Nanotechnology; Scanning probe; Real-time imaging; Mechanical design},
    }
  • P. J. Thurner, B. Erickson, P. Turner, R. Jungmann, J. Lelujian, A. Proctor, J. Weaver, G. Schitter, D. E. Morse, and P. K. Hansma, The Effect of NaF in vitro on the mechanical and material properties of trabecular and cortical bone, Advanced Materials, vol. 21, p. 451–457, 2008.
    [BibTex]
    @Article{TUW-269295,
    Title = {The Effect of NaF in vitro on the mechanical and material properties of trabecular and cortical bone},
    Author = {Thurner, Philipp J. and Erickson, Blake and Turner, Patricia and Jungmann, Ralf and Lelujian, Jason and Proctor, Alexander and Weaver, J and Schitter, Georg and Morse, D. E. and Hansma, Paul K.},
    Journal = {Advanced Materials},
    Year = {2008},
    Pages = {451--457},
    Volume = {21},
    }
  • G. Zeichen, B. Favre-Bulle, A. Zoitl, and J. Prenninger, Kriterien für die Exzellenz der Produktion, ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, vol. 103, iss. 5, p. 328–332, 2008.
    [BibTex]
    @Article{TUW-112793,
    Title = {Kriterien f{\"u}r die Exzellenz der Produktion},
    Author = {Zeichen, Gerfried and Favre-Bulle, Bernard and Zoitl, Alois and Prenninger, Johann},
    Journal = {ZWF Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb},
    Year = {2008},
    Number = {5},
    Pages = {328--332},
    Volume = {103},
    }
  • G. Zeichen, A. Zoitl, and J. Prenninger, Systemtechnologien für Produktionssysteme, ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, vol. 103, iss. 9, p. 589–593, 2008.
    [BibTex]
    @Article{TUW-167556,
    Title = {Systemtechnologien f{\"u}r Produktionssysteme},
    Author = {Zeichen, Gerfried and Zoitl, Alois and Prenninger, Johann},
    Journal = {ZWF Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb},
    Year = {2008},
    Number = {9},
    Pages = {589--593},
    Volume = {103},
    Url = {http://www.hanser-elibrary.com/doi/abs/10.3139/104.101329}
    }
  • A. Zoitl and T. Strasser, Auf dem Weg in die Anwendung, Computer&Automation, vol. 11, p. 70–76, 2008.
    [BibTex]
    @Article{TUW-168702,
    Title = {Auf dem Weg in die Anwendung},
    Author = {Zoitl, Alois and Strasser, Thomas},
    Journal = {Computer{\&}Automation},
    Year = {2008},
    Pages = {70--76},
    Volume = {11},
    }

2007

  • J. H. Kindt, P. J. Thurner, M. E. Lauer, B. L. Bosma, G. Schitter, G. E. Fantner, M. Izumi, J. Weaver, D. E. Morse, and P. K. Hansma, In situ Observation of Fluoride-ion Induced Apatite-Collagen Detachment on Bone Fracture Surfaces by Atomic Force Microscopy, Nanotechnology, vol. 18, iss. 3, p. 1–8, 2007.
    [BibTex]
    @Article{TUW-269236,
    Title = {In situ Observation of Fluoride-ion Induced Apatite-Collagen Detachment on Bone Fracture Surfaces by Atomic Force Microscopy},
    Author = {Kindt, J. H. and Thurner, Philipp J. and Lauer, M. E. and Bosma, B. L. and Schitter, Georg and Fantner, G. E. and Izumi, M. and Weaver, J and Morse, D. E. and Hansma, Paul K.},
    Journal = {Nanotechnology},
    Year = {2007},
    Note = {invited},
    Number = {3},
    Pages = {1--8},
    Volume = {18},
    }
  • M. Merdan, A. Zoitl, I. Hegny, and B. Favre-Bulle, Einsatzanalyse von RFID-Technologie in KMU, ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, vol. 102, iss. 9, p. 587–593, 2007.
    [BibTex]
    @Article{TUW-111660,
    Title = {Einsatzanalyse von RFID-Technologie in KMU},
    Author = {Merdan, Munir and Zoitl, Alois and Hegny, Ingo and Favre-Bulle, Bernard},
    Journal = {ZWF Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb},
    Year = {2007},
    Number = {9},
    Pages = {587--593},
    Volume = {102},
    }
  • G. Schitter, K. J. {AA}ström, B. E. DeMartini, P. J. Thurner, K. L. Turner, and P. K. Hansma, Design and modeling of a high-speed AFM-scanner, IEEE Transactions on Control Systems Technology, vol. 15, iss. 5, p. 906–915, 2007.
    [BibTex]
    @Article{TUW-269238,
    Title = {Design and modeling of a high-speed AFM-scanner},
    Author = {Schitter, Georg and {\AA}str{\"o}m, Karl J. and DeMartini, Barry E. and Thurner, Philipp J. and Turner, Kimberly L. and Hansma, Paul K.},
    Journal = {IEEE Transactions on Control Systems Technology},
    Year = {2007},
    Number = {5},
    Pages = {906--915},
    Volume = {15},
    Keywords = {Atomic force microscopy, fast scanning, mechatronics, nanotechnology, precision positioning, real time imaging.},
    }

2006

  • G. E. Fantner, E. Oroudjev, G. Schitter, L. S. Golde, P. J. Thurner, M. M. Finch, P. Turner, D. E. Morse, H. Hansma, and P. K. Hansma, Sacrificial Bonds and Hidden Length: Unraveling Molecular Mesostructures in Tough Materials, Biophysical Journal, vol. 90, p. 1411–1418, 2006.
    [BibTex]
    @Article{TUW-269243,
    Title = {Sacrificial Bonds and Hidden Length: Unraveling Molecular Mesostructures in Tough Materials},
    Author = {Fantner, G. E. and Oroudjev, Emin and Schitter, Georg and Golde, Laura S. and Thurner, Philipp J. and Finch, Marquesa M. and Turner, Patricia and Morse, D. E. and Hansma, Helen and Hansma, Paul K.},
    Journal = {Biophysical Journal},
    Year = {2006},
    Pages = {1411--1418},
    Volume = {90},
    }
  • G. E. Fantner, O. Rabinovych, G. Schitter, P. J. Thurner, J. H. Kindt, M. M. Finch, J. Weaver, L. S. Golde, D. E. Morse, I. W. Rangelow, and P. K. Hansma, Hierarchical interconnections in the nano-composite material Bone: Fibrilar Cross-Links resist fracture on several length scales, Composites Science and Technology, vol. 66, p. 1202–1208, 2006.
    [BibTex]
    @Article{TUW-269244,
    Title = {Hierarchical interconnections in the nano-composite material Bone: Fibrilar Cross-Links resist fracture on several length scales},
    Author = {Fantner, G. E. and Rabinovych, Olexander and Schitter, Georg and Thurner, Philipp J. and Kindt, J. H. and Finch, Marquesa M. and Weaver, J and Golde, Laura S. and Morse, D. E. and Rangelow, I.W. and Hansma, Paul K.},
    Journal = {Composites Science and Technology},
    Year = {2006},
    Pages = {1202--1208},
    Volume = {66},
    Keywords = {Bone; AFM; Mechanical properties; Non-collagenous proteins; Filaments; Collagen; Fibrils},
    }
  • G. E. Fantner, G. Schitter, J. H. Kindt, T. Ivanov, K. Ivanova, R. Patel, N. Holten-Andersen, J. Adams, P. J. Thurner, I. W. Rangelow, and P. K. Hansma, Components for high-speed atomic force microscopy, Ultramicroscopy, vol. 106, p. 881–887, 2006.
    [BibTex]
    @Article{TUW-269240,
    Title = {Components for high-speed atomic force microscopy},
    Author = {Fantner, G. E. and Schitter, Georg and Kindt, J. H. and Ivanov, Tzvetan and Ivanova, Katerina and Patel, Rohan and Holten-Andersen, Niels and Adams, Jonathan and Thurner, Philipp J. and Rangelow, I.W. and Hansma, Paul K.},
    Journal = {Ultramicroscopy},
    Year = {2006},
    Pages = {881--887},
    Volume = {106},
    }
  • B. Favre-Bulle and A. Zoitl, Adaptive Produktionssysteme – Ein zukunftssicheres Konzept für die Europäische Produktion, Industrie Management, vol. 2, p. 45–48, 2006.
    [BibTex]
    @Article{TUW-110090,
    Title = {Adaptive Produktionssysteme - Ein zukunftssicheres Konzept f{\"u}r die Europ{\"a}ische Produktion},
    Author = {Favre-Bulle, Bernard and Zoitl, Alois},
    Journal = {Industrie Management},
    Year = {2006},
    Pages = {45--48},
    Volume = {2},
    }
  • B. Favre-Bulle, A. Zoitl, and C. Dutzler, Zukunftstrends der Automatisierungstechnik und die Bedeutung von adaptiven Produktionssystemen, Elektrotechnik und Informationstechnik (e&i), vol. 5, p. 172–177, 2006.
    [BibTex]
    @Article{TUW-110173,
    Title = {Zukunftstrends der Automatisierungstechnik und die Bedeutung von adaptiven Produktionssystemen},
    Author = {Favre-Bulle, Bernard and Zoitl, Alois and Dutzler, Christoph},
    Journal = {Elektrotechnik und Informationstechnik (e{\&}i)},
    Year = {2006},
    Pages = {172--177},
    Volume = {5},
    Url = {https://link.springer.com/article/10.1007/s00502-006-0338}
    }
  • P. K. Hansma, G. Schitter, G. E. Fantner, and C. Prater, High-speed atomic force microscopy, Science, vol. 314, p. 601–602, 2006.
    [BibTex]
    @Article{TUW-269239,
    Title = {High-speed atomic force microscopy},
    Author = {Hansma, Paul K. and Schitter, Georg and Fantner, G. E. and Prater, Crag},
    Journal = {Science},
    Year = {2006},
    Pages = {601--602},
    Volume = {314},
    }
  • T. Strasser, I. Müller, A. Zoitl, C. K. Sünder, and G. Grabmair, Verteilte, rekonfigurierbare Automatisierungssysteme im Produktionsbereich, Industrie Management, vol. 2, p. 33–36, 2006.
    [BibTex]
    @Article{TUW-110091,
    Title = {Verteilte, rekonfigurierbare Automatisierungssysteme im Produktionsbereich},
    Author = {Strasser, Thomas and M{\"u}ller, Ingomar and Zoitl, Alois and S{\"u}nder, Christoph Karl and Grabmair, Gunnar},
    Journal = {Industrie Management},
    Year = {2006},
    Pages = {33--36},
    Volume = {2},
    }
  • C. K. Sünder, B. Favre-Bulle, and A. Zoitl, Verteilt automatisieren, Computer&Automation, vol. 3, p. 32–36, 2006.
    [BibTex]
    @Article{TUW-109995,
    Title = {Verteilt automatisieren},
    Author = {S{\"u}nder, Christoph Karl and Favre-Bulle, Bernard and Zoitl, Alois},
    Journal = {Computer{\&}Automation},
    Year = {2006},
    Pages = {32--36},
    Volume = {3},
    }
  • C. K. Sünder, A. Zoitl, and C. Dutzler, Functional structure-based modelling of automation systems, International Journal of Manufacturing Research (IJMR), vol. 1, iss. 4, p. 405–420, 2006.
    [BibTex]
    @Article{TUW-111165,
    Title = {Functional structure-based modelling of automation systems},
    Author = {S{\"u}nder, Christoph Karl and Zoitl, Alois and Dutzler, Christoph},
    Journal = {International Journal of Manufacturing Research (IJMR)},
    Year = {2006},
    Number = {4},
    Pages = {405--420},
    Volume = {1},
    }
  • C. K. Sünder, A. Zoitl, F. Mehofer, and B. Favre-Bulle, Advanced use of PLCopen motion control library for autonomous servo drives in IEC 61499 based automation and control systems, Elektrotechnik und Informationstechnik (e&i), vol. 5, p. 191–196, 2006.
    [BibTex]
    @Article{TUW-110174,
    Title = {Advanced use of PLCopen motion control library for autonomous servo drives in IEC 61499 based automation and control systems},
    Author = {S{\"u}nder, Christoph Karl and Zoitl, Alois and Mehofer, Franz and Favre-Bulle, Bernard},
    Journal = {Elektrotechnik und Informationstechnik (e{\&}i)},
    Year = {2006},
    Pages = {191--196},
    Volume = {5},
    Url = {https://link.springer.com/article/10.1007/s00502-006-0341}
    }
  • P. J. Thurner, B. Erickson, Z. Schriock, R. Jungmann, J. Weaver, G. E. Fantner, G. Schitter, D. E. Morse, and P. K. Hansma, High-Speed photography of compressed human trabecular bone correlates whitening to microscopic damage, Engineering Fracture Mechanics, vol. 74, iss. 12, p. 1928–1941, 2006.
    [BibTex]
    @Article{TUW-269242,
    Title = {High-Speed photography of compressed human trabecular bone correlates whitening to microscopic damage},
    Author = {Thurner, Philipp J. and Erickson, Blake and Schriock, Zachary and Jungmann, Ralf and Weaver, J and Fantner, G. E. and Schitter, Georg and Morse, D. E. and Hansma, Paul K.},
    Journal = {Engineering Fracture Mechanics},
    Year = {2006},
    Note = {invited},
    Number = {12},
    Pages = {1928--1941},
    Volume = {74},
    Keywords = {Trabecular bone; Fracture; High-speed photography; Stress-whitening; Microdamage; Delamination},
    }
  • P. J. Thurner, B. Erickson, Z. Schriock, J. Langan, J. S. Scott, M. Zhao, J. Weaver, G. Schitter, D. E. Morse, and P. K. Hansma, High-Speed photography of the development of microdamage in trabelucar bone during compression, Journal of Materials Research, vol. 21, iss. 5, p. 1093–1100, 2006.
    [BibTex]
    @Article{TUW-269241,
    Title = {High-Speed photography of the development of microdamage in trabelucar bone during compression},
    Author = {Thurner, Philipp J. and Erickson, Blake and Schriock, Zachary and Langan, John and Scott, J.S. and Zhao, Maria and Weaver, J and Schitter, Georg and Morse, D. E. and Hansma, Paul K.},
    Journal = {Journal of Materials Research},
    Year = {2006},
    Note = {invited},
    Number = {5},
    Pages = {1093--1100},
    Volume = {21},
    }

2005

  • G. E. Fantner, P. Hegarty, J. H. Kindt, G. Schitter, G. Cidade, and P. K. Hansma, Data acquisition system for high-speed atomic force microscopy, Review of Scientific Instruments, vol. 76, p. 1–4, 2005.
    [BibTex]
    @Article{TUW-269245,
    Title = {Data acquisition system for high-speed atomic force microscopy},
    Author = {Fantner, G. E. and Hegarty, Paul and Kindt, J. H. and Schitter, Georg and Cidade, Geraldo and Hansma, Paul K.},
    Journal = {Review of Scientific Instruments},
    Year = {2005},
    Pages = {1--4},
    Volume = {76},
    }
  • A. Stemmer, G. Schitter, J. M. Rieber, and F. Allgöwer, Control strategies towards faster quantitative imaging in atomic force microscopy, European Journal of Control, vol. 11, p. 4–5, 2005.
    [BibTex]
    @Article{TUW-269296,
    Title = {Control strategies towards faster quantitative imaging in atomic force microscopy},
    Author = {Stemmer, A. and Schitter, Georg and Rieber, Jochen M. and Allg{\"o}wer, F.},
    Journal = {European Journal of Control},
    Year = {2005},
    Note = {invited},
    Pages = {4--5},
    Volume = {11},
    }

2004

  • B. Favre-Bulle and A. Zoitl, Zentralismus ist out!, a3VOLT, vol. 25, iss. 1-2, p. 16–17, 2004.
    [BibTex]
    @Article{TUW-108531,
    Title = {Zentralismus ist out!},
    Author = {Favre-Bulle, Bernard and Zoitl, Alois},
    Journal = {a3VOLT},
    Year = {2004},
    Number = {1-2},
    Pages = {16--17},
    Volume = {25},
    }
  • K. P. Pernstich, S. Haas, D. Oberhoff, C. Goldmann, D. J. Gundlach, B. Batlogg, A. N. Rashid, and G. Schitter, Threshold voltage shift in organic FETs by dipole-monolayers on the gate insulator, Journal of Applied Physics, vol. 96, iss. 11, p. 6431–6438, 2004.
    [BibTex]
    @Article{TUW-269247,
    Title = {Threshold voltage shift in organic FETs by dipole-monolayers on the gate insulator},
    Author = {Pernstich, K. P. and Haas, S. and Oberhoff, D. and Goldmann, C. and Gundlach, D. J. and Batlogg, B. and Rashid, A. N. and Schitter, Georg},
    Journal = {Journal of Applied Physics},
    Year = {2004},
    Number = {11},
    Pages = {6431--6438},
    Volume = {96},
    }
  • G. Schitter, F. Allgöwer, and A. Stemmer, A new control strategy for high-speed atomic force microscopy, Nanotechnology, vol. 15, p. 108–114, 2004.
    [BibTex]
    @Article{TUW-269253,
    Title = {A new control strategy for high-speed atomic force microscopy},
    Author = {Schitter, Georg and Allg{\"o}wer, F. and Stemmer, A.},
    Journal = {Nanotechnology},
    Year = {2004},
    Pages = {108--114},
    Volume = {15},
    }
  • G. Schitter, A. Scarpas, and F. Allgöwer, Robust two-degree-of-freedom control of an atomic force microscope, Asian Journal of Control, vol. 6, iss. 2, p. 156–163, 2004.
    [BibTex]
    @Article{TUW-269248,
    Title = {Robust two-degree-of-freedom control of an atomic force microscope},
    Author = {Schitter, Georg and Scarpas, Athanasios and Allg{\"o}wer, F.},
    Journal = {Asian Journal of Control},
    Year = {2004},
    Number = {2},
    Pages = {156--163},
    Volume = {6},
    Keywords = {Nanotechnology, fast scanning, AFM, robust control, scanning probe.},
    }
  • G. Schitter, R. Stark, and A. Stemmer, Fast contact-mode atomic force microscopy on biological specimen by model-based control, Ultramicroscopy, vol. 100, p. 253–257, 2004.
    [BibTex]
    @Article{TUW-269249,
    Title = {Fast contact-mode atomic force microscopy on biological specimen by model-based control},
    Author = {Schitter, Georg and Stark, Robert and Stemmer, A.},
    Journal = {Ultramicroscopy},
    Year = {2004},
    Pages = {253--257},
    Volume = {100},
    Keywords = {Atomic force microscopy},
    }
  • G. Schitter and A. Stemmer, Identification and open-loop tracking control of a piezoelectric tube scanner for high-speed scanning probe microscopy, IEEE Transactions on Control Systems Technology, vol. 12, iss. 3, p. 449–454, 2004.
    [BibTex]
    @Article{TUW-269251,
    Title = {Identification and open-loop tracking control of a piezoelectric tube scanner for high-speed scanning probe microscopy},
    Author = {Schitter, Georg and Stemmer, A.},
    Journal = {IEEE Transactions on Control Systems Technology},
    Year = {2004},
    Number = {3},
    Pages = {449--454},
    Volume = {12},
    Keywords = {Atomic force microscopy, fast scanning, friction force, piezoelectric transducers, scanning probe, tracking control.},
    }
  • R. Stark, G. Schitter, M. Stark, R. Guckenberger, and A. Stemmer, State space model of freely vibrating and surface-coupled cantilever dynamics in atomic force microscopy, Physical Review B, vol. 69, 2004.
    [BibTex]
    @Article{TUW-269252,
    Title = {State space model of freely vibrating and surface-coupled cantilever dynamics in atomic force microscopy},
    Author = {Stark, Robert and Schitter, Georg and Stark, Martin and Guckenberger, Reinhard and Stemmer, A.},
    Journal = {Physical Review B},
    Year = {2004},
    Volume = {69},
    }
  • R. Stark, G. Schitter, and A. Stemmer, Velocity dependend friction laws in contact mode atomic-force microscopy, Ultramicroscopy, vol. 100, p. 309–317, 2004.
    [BibTex]
    @Article{TUW-269250,
    Title = {Velocity dependend friction laws in contact mode atomic-force microscopy},
    Author = {Stark, Robert and Schitter, Georg and Stemmer, A.},
    Journal = {Ultramicroscopy},
    Year = {2004},
    Pages = {309--317},
    Volume = {100},
    Keywords = {Atomic force microscopy},
    }

2003

  • C. Dutzler, W. Rumpl, and A. Zoitl, Verteilt automatisieren, Computer&Automation, iss. 12, p. 30–34, 2003.
    [BibTex]
    @Article{TUW-107185,
    Title = {Verteilt automatisieren},
    Author = {Dutzler, Christoph and Rumpl, Werner and Zoitl, Alois},
    Journal = {Computer{\&}Automation},
    Year = {2003},
    Number = {12},
    Pages = {30--34},
    Volume = {0},
    }
  • D. Haefliger, M. Muhenchinger, G. Schitter, and A. Stemmer, An integrated piezo-acoustic shear-force distance sensor with nanometer resolution for a micropipette tool, Sensors and Actuators A: Physical, vol. 103, p. 353–358, 2003.
    [BibTex]
    @Article{TUW-269256,
    Title = {An integrated piezo-acoustic shear-force distance sensor with nanometer resolution for a micropipette tool},
    Author = {Haefliger, Daniel and Muhenchinger, Marc and Schitter, Georg and Stemmer, A.},
    Journal = {Sensors and Actuators A: Physical},
    Year = {2003},
    Pages = {353--358},
    Volume = {103},
    Keywords = {Shear-force distance control; Micropipette; Pick-and-place; Particle handling; Micro-fabrication 1. Introduction Micropipettes offer a versatile tool for the handling of biological cells},
    }
  • G. Schitter and A. Stemmer, Model-based signal conditioning for high-speed atomic force and friction force microscopy, Microelectronic Engineering, vol. 67-68, p. 938–944, 2003.
    [BibTex]
    @Article{TUW-269255,
    Title = {Model-based signal conditioning for high-speed atomic force and friction force microscopy},
    Author = {Schitter, Georg and Stemmer, A.},
    Journal = {Microelectronic Engineering},
    Year = {2003},
    Pages = {938--944},
    Volume = {67-68},
    Keywords = {Friction force; Fast scanning; Tracking control; Scanning probe},
    }
  • R. Stark, G. Schitter, and A. Stemmer, Tuning the interaction forces in tapping mode atomic-force microscopy, Physical Review B, vol. 68, 2003.
    [BibTex]
    @Article{TUW-269254,
    Title = {Tuning the interaction forces in tapping mode atomic-force microscopy},
    Author = {Stark, Robert and Schitter, Georg and Stemmer, A.},
    Journal = {Physical Review B},
    Year = {2003},
    Volume = {68},
    }

2002

  • G. Schitter, R. Stark, and A. Stemmer, Sensors for closed-loop piezo control: strain gauges versus optical sensors, Measurement Science & Technology, vol. 13, iss. 4, p. 47–48, 2002.
    [BibTex]
    @Article{TUW-269258,
    Title = {Sensors for closed-loop piezo control: strain gauges versus optical sensors},
    Author = {Schitter, Georg and Stark, Robert and Stemmer, A.},
    Journal = {Measurement Science {\&} Technology},
    Year = {2002},
    Number = {4},
    Pages = {47--48},
    Volume = {13},
    }
  • G. Schitter and A. Stemmer, Eliminating mechanical perturbations in scanning probe microscopy, Nanotechnology, vol. 13, p. 663–665, 2002.
    [BibTex]
    @Article{TUW-269257,
    Title = {Eliminating mechanical perturbations in scanning probe microscopy},
    Author = {Schitter, Georg and Stemmer, A.},
    Journal = {Nanotechnology},
    Year = {2002},
    Pages = {663--665},
    Volume = {13},
    }
  • G. Schitter and A. Stemmer, Fast closed loop control of piezoelectric transducers, Journal of Vacuum Science & Technology B, vol. 20, iss. 1, p. 350–352, 2002.
    [BibTex]
    @Article{TUW-269259,
    Title = {Fast closed loop control of piezoelectric transducers},
    Author = {Schitter, Georg and Stemmer, A.},
    Journal = {Journal of Vacuum Science {\&} Technology B},
    Year = {2002},
    Number = {1},
    Pages = {350--352},
    Volume = {20},
    }

2001

  • G. Schitter, P-. Menold, H. Knapp, F. Allgöwer, and A. Stemmer, High performance feedback for fast scanning atomic force microscopes, Review of Scientific Instruments, vol. 72, iss. 8, p. 3320–3327, 2001.
    [BibTex]
    @Article{TUW-269260,
    Title = {High performance feedback for fast scanning atomic force microscopes},
    Author = {Schitter, Georg and Menold, P- and Knapp, H. and Allg{\"o}wer, F. and Stemmer, A.},
    Journal = {Review of Scientific Instruments},
    Year = {2001},
    Number = {8},
    Pages = {3320--3327},
    Volume = {72},
    }

Konferenzbeiträge

2018

  • M. Bibl, C. Zech, and G. Schitter, Design and Control of a Ball on Ball System With a Programmable Logic Controller and Vision Feedback, in IEEJ International Workshop on Sensing, Actuation, Motion Control and Optimization (SAMCON) 2018, 2018.
    [BibTex]
    @Conference{TUW-1210181,
    Title = {Design and Control of a Ball on Ball System With a Programmable Logic Controller and Vision Feedback},
    Author = {Bibl, M. and Zech, C. and Schitter, G.},
    Booktitle = {IEEJ International Workshop on Sensing, Actuation, Motion Control and Optimization (SAMCON) 2018},
    Year = {2018},
    }
  • F. Cigarini, S. Ito S.and Tropmmair, and G. Schitter, Comparison of a Voice Coil and a Hybrid Reluctance Actuator via FEM, in Proceedings of the 4th IEEJ international workshop on Sensing, Actuation, Motion Control, and Optimization (SAMCON2018), 2018.
    [BibTex]
    @Conference{TUW1804184,
    Title = {Comparison of a Voice Coil and a Hybrid Reluctance Actuator via FEM},
    Author = {Cigarini, F. and Ito, S.and Tropmmair, S. and Schitter, G.},
    Booktitle = {Proceedings of the 4th IEEJ international workshop on Sensing, Actuation, Motion Control, and Optimization (SAMCON2018)},
    Year = {2018},
    }
  • M. Fuerst, S. Unger, S. Ito, and G. Schitter, Wavefront measurement based feedback control for automatic alignment of a high-NA optical system, in XXII World Congress of the International Measurement Confederation (IMEKO), 2018.
    [BibTex]
    @Conference{TUW-2208181,
    Title = {Wavefront measurement based feedback control for automatic alignment of a high-NA optical system},
    Author = {Fuerst, M. and Unger, S. and Ito, S. and Schitter, G.},
    Booktitle = {XXII World Congress of the International Measurement Confederation (IMEKO)},
    Year = {2018},
    }
  • S. Ito, M. Poik, E. K. Csencsics, J. Schlarp, and G. Schitter, Scanning Chromatic Confocal Sensor for Fast 3D Surface Characterization, in Proceedings of the ASPE and EUSPEN Summer Topical Meeting, Advancing Precision in Additive Manufacturing, 2018, pp. 226-231.
    [BibTex]
    @Conference{TUW-260718,
    Title = {Scanning Chromatic Confocal Sensor for Fast 3D Surface Characterization},
    Author = {Ito, S. and Poik, M. and Csencsics, E. K. and Schlarp, J. and Schitter, G.},
    Booktitle = {Proceedings of the ASPE and EUSPEN Summer Topical Meeting, Advancing Precision in Additive Manufacturing},
    Year = {2018},
    Pages = {226-231},
    }
  • S. Ito and G. Schitter, Optimal Fail-Safe Motion Using Dynamic Brake for Lorentz-actuated AFM, in Proceedings of the IEEE 15th International Workshop on Advanced Motion Control, 2018.
    [BibTex]
    @Conference{TUW-180418,
    Title = {Optimal Fail-Safe Motion Using Dynamic Brake for Lorentz-actuated AFM},
    Author = {Ito, S. and Schitter, G.},
    Booktitle = {Proceedings of the IEEE 15th International Workshop on Advanced Motion Control},
    Year = {2018},
    Doi = {10.1109/AMC.2019.8371139},
    }
  • S. Ito, S. Troppmair, and G. Cigarini F. ans Schitter, Hybrid Reluctance Actuator for High-speed Scanning with Nanometer Resolution, in Proceedings of the 4th IEEJ international workshop on Sensing, Actuation, Motion Control, and Optimization (SAMCON2018), 2018.
    [BibTex]
    @Conference{TUW1804183,
    Title = {Hybrid Reluctance Actuator for High-speed Scanning with Nanometer Resolution},
    Author = {Ito, S. and Troppmair, S. and Cigarini, F. ans Schitter, G.},
    Booktitle = {Proceedings of the 4th IEEJ international workshop on Sensing, Actuation, Motion Control, and Optimization (SAMCON2018)},
    Year = {2018},
    }
  • T. Riel, A. Galffy, and G. Schitter, Analysis and Robust Control of an Precision Motion Platform using Disturbance Compensation, in Proceedings of the IEEE Conference on Control Technology and Applications (CCTA), 2018, pp. 1090-1095.
    [BibTex]
    @Conference{TUW-030918,
    Title = {Analysis and Robust Control of an Precision Motion Platform using Disturbance Compensation},
    Author = {Riel, T. and Galffy, A. and Schitter, G.},
    Booktitle = {Proceedings of the IEEE Conference on Control Technology and Applications (CCTA)},
    Year = {2018},
    Pages = {1090-1095},
    }
  • J. Schlarp, E. K. Csencsics, and G. Schitter, Influence of Scheimpflug condition on measurements of a scanning laser line sensor for 3D imaging, in XXII World Congress of the International Measurement Confederation (IMEKO), 2018.
    [BibTex]
    @Conference{TUW-2108182,
    Title = {Influence of Scheimpflug condition on measurements of a scanning laser line sensor for 3D imaging},
    Author = {Schlarp, J. and Csencsics, E. K. and Schitter, G.},
    Booktitle = {XXII World Congress of the International Measurement Confederation (IMEKO)},
    Year = {2018},
    }
  • J. Schlarp, E. K. Csencsics, and G. Schitter, Design and evaluation of a 3D printed flexure for a fast steering mirror, in 2018 ASPE and euspen Summer Topical Meeting on Advancing Precision in Additive Manufacturing, 2018.
    [BibTex]
    @Conference{TUW-2108183,
    Title = {Design and evaluation of a 3D printed flexure for a fast steering mirror},
    Author = {Schlarp, J. and Csencsics, E. K. and Schitter, G.},
    Booktitle = {2018 ASPE and euspen Summer Topical Meeting on Advancing Precision in Additive Manufacturing},
    Year = {2018},
    }
  • J. Schlarp, E. K. Csencsics, and G. Schitter, Feature detection and scan area selection for 3D laser scanning sensors, in 2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2018), 2018.
    [BibTex]
    @Conference{TUW-2108184,
    Title = {Feature detection and scan area selection for 3D laser scanning sensors},
    Author = {Schlarp, J. and Csencsics, E. K. and Schitter, G.},
    Booktitle = {2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2018)},
    Year = {2018},
    }

2017

  • E. K. Csencsics, S. ito, M. Fürst, F. Cigarini, and G. Schitter, Christian Doppler Laboratory Precision Engineering for Automated In-line Metrology, in 1st GMAR workshop, 2017.
    [BibTex]
    @Conference{TUW-0612172,
    Title = {Christian Doppler Laboratory Precision Engineering for Automated In-line Metrology},
    Author = {Csencsics, E. K. and ito, S. and F{\"u}rst, M. and Cigarini, F. and Schitter, G.},
    Booktitle = {1st GMAR workshop},
    Year = {2017},
    }
  • E. K. Csencsics and G. Schitter, Parametric PID Controller Tuning for a Fast Steering Mirror, in Proceedings of the 1st IEEE Conference on Control Technology and Applications (CCTA2017), 2017.
    [BibTex]
    @InProceedings{TUW041020174,
    Title = {Parametric PID Controller Tuning for a Fast Steering Mirror},
    Author = {Csencsics, E. K. and Schitter, G.},
    Booktitle = {Proceedings of the 1st IEEE Conference on Control Technology and Applications (CCTA2017)},
    Year = {2017},
    }
  • E. K. Csencsics and G. Schitter, Design of a phase-locked-loop-based control scheme for Lissajous-trajectory scanning of fast steering mirrors, in Proceedings of the American Control Conference (ACC2017), 2017.
    [BibTex]
    @InProceedings{TUW-041020175,
    Title = {Design of a phase-locked-loop-based control scheme for Lissajous-trajectory scanning of fast steering mirrors},
    Author = {Csencsics, E. K. and Schitter, G.},
    Booktitle = {Proceedings of the American Control Conference (ACC2017)},
    Year = {2017},
    Doi = {10.23919/ACC.2017.7963176},
    }
  • E. K. Csencsics and G. Schitter, Mechatronisches Design und Regelung eines 2D Kippspiegelsystems, in 51. Regelungstechnisches Kolloquium, 2017.
    [BibTex]
    @Conference{TUW-041020176,
    Title = {Mechatronisches Design und Regelung eines 2D Kippspiegelsystems},
    Author = {Csencsics, E. K. and Schitter, G.},
    Booktitle = {51. Regelungstechnisches Kolloquium},
    Year = {2017},
    }
  • E. K. Csencsics, J. Schlarp, and G. Schitter, Bandwidth extension of hybrid-reluctance-force-based tip/tilt system by reduction of eddy currents, in Proceedings of the 2017 IEEE International Conference on Advanced Intelligent Mechatronics (AIM2017), 2017, pp. 1167-1172.
    [BibTex]
    @InProceedings{TUW041020173,
    Title = {Bandwidth extension of hybrid-reluctance-force-based tip/tilt system by reduction of eddy currents},
    Author = {Csencsics, E. K. and Schlarp, J. and Schitter, G.},
    Booktitle = {Proceedings of the 2017 IEEE International Conference on Advanced Intelligent Mechatronics (AIM2017)},
    Year = {2017},
    Pages = {1167-1172},
    Doi = {10.1109/AIM.2017.8014176},
    }
  • S. Ito, D. Neyer, S. Jürgen, and G. Schitter, Dual Actuation of Fast Scanning Axis for High-speed Atomic Force Microscopy, in Proceedings of the IFAC 2017 World Congress, 2017, p. 6.
    [BibTex]
    @Conference{TUW-170717,
    Title = {Dual Actuation of Fast Scanning Axis for High-speed Atomic Force Microscopy},
    Author = {Ito, Shingo and Neyer, Daniel and Steininger J{\"u}rgen and Schitter, Georg},
    Booktitle = {Proceedings of the IFAC 2017 World Congress},
    Year = {2017},
    Pages = {6},
    Doi = {10.1016/j.ifacol.2017.08.1156},
    }
  • S. Ito, H. W. Yoo, and G. Schitter, Comparison of Modeling-free Learning Control Algorithms for Galvanometer Scanner’s Periodic Motion, in Proceedings of the IEEE/ASME International conference on advanced intelligent mechatronics, 2017.
    [BibTex]
    @InProceedings{TUW-070717,
    Title = {Comparison of Modeling-free Learning Control Algorithms for Galvanometer Scanner's Periodic Motion},
    Author = {Ito, Shingo and Yoo, Han Woong and Schitter, Georg},
    Booktitle = {Proceedings of the IEEE/ASME International conference on advanced intelligent mechatronics},
    Year = {2017},
    Doi = {10.1109/AIM.2017.8014207},
    }
  • D. Kohl, S. Hoser, and G. Schitter, Dual Actuation of Fast Scanning Axis for High-speed Atomic Force Microscopy, in Proceedings of the IFAC 2017 World Congress, 2017.
    [BibTex]
    @Conference{TUW-0712174,
    Title = {Dual Actuation of Fast Scanning Axis for High-speed Atomic Force Microscopy},
    Author = {Kohl, D. and Hoser, S. and Schitter, G.},
    Booktitle = {Proceedings of the IFAC 2017 World Congress},
    Year = {2017},
    Doi = {10.1016/j.ifacol.2017.08.1165},
    }
  • D. Kohl, C. Kerschner, and G. Schitter, Automatic fourier synthesis based input-shaping for scanning piezo-electric actuators, in Proceedings of the IEEE/ASME International conference on advanced intelligent mechatronics, 2017, pp. 1083-1088.
    [BibTex]
    @Conference{TUW-0712175,
    Title = {Automatic fourier synthesis based input-shaping for scanning piezo-electric actuators},
    Author = {Kohl, D. and Kerschner, C. and Schitter, G.},
    Booktitle = {Proceedings of the IEEE/ASME International conference on advanced intelligent mechatronics},
    Year = {2017},
    Pages = {1083-1088},
    Doi = {10.1109/AIM.2017.8014163},
    }
  • D. Kohl, P. Mesquida, and G. Schitter, Multi-frequency Kelvin Probe Force Microscopy Method for Charge Mapping Without DC-Bias, in Nano and Photonics & FemtoMat 2017, 2017.
    [BibTex]
    @Conference{TUW-041020177,
    Title = {Multi-frequency Kelvin Probe Force Microscopy Method for Charge Mapping Without DC-Bias},
    Author = {Kohl, D. and Mesquida, P. and Schitter, G.},
    Booktitle = {Nano and Photonics \& FemtoMat 2017},
    Year = {2017},
    }
  • D. Kohl, P. Mesquida, and G. Schitter, Pitfalls of practical KPFM-phase-tuning leading to polarity reversal on biological samples, in Proceeding of AFM BioMed 2017, 2017.
    [BibTex]
    @Conference{TUW-0712176,
    Title = {Pitfalls of practical KPFM-phase-tuning leading to polarity reversal on biological samples},
    Author = {Kohl, D. and Mesquida, P. and Schitter, G.},
    Booktitle = {Proceeding of AFM BioMed 2017},
    Year = {2017},
    }
  • T. Riel, A. Galffy, A. Sinn, and G. Schitter, Improvement of the angular Precision of an Optical Metrology Platform by Disturbanca Compensation, in Proceedings of 2017 Spring Topical Meeting on Precision Engineering and Optics: What are the Limits of Precision, and How to Characterize Them?, 2017.
    [BibTex]
    @Conference{TUW-201117,
    Title = {Improvement of the angular Precision of an Optical Metrology Platform by Disturbanca Compensation},
    Author = {Riel, T. and Galffy, A. and Sinn, A. and Schitter, G.},
    Booktitle = {Proceedings of 2017 Spring Topical Meeting on Precision Engineering and Optics: What are the Limits of Precision, and How to Characterize Them?},
    Year = {2017},
    }
  • A. Sinn, T. Riel, F. Deisl, and G. Schitter, Tip-tilt vibration compensation: A system analysis, in Proceedings of 2017 Spring Topical Meeting on Precision Engineering and Optics: What are the Limits of Precision, and How to Characterize Them?, 2017, pp. 42-47.
    [BibTex]
    @InProceedings{TUW-04102017,
    Title = {Tip-tilt vibration compensation: A system analysis},
    Author = {Sinn, A. and Riel, T. and Deisl, F. and Schitter, G.},
    Booktitle = {Proceedings of 2017 Spring Topical Meeting on Precision Engineering and Optics: What are the Limits of Precision, and How to Characterize Them?},
    Year = {2017},
    Pages = {42-47},
    }
  • T. Varhegyi, M. Melik-Merkumians, M. Steinegger, G. Halmetschlager, and G. Schitter, A Visual Servoing Approach for a Six Degrees-of-Freedom Industrial Robot by RGB-D Sensing, in Proceedings of the OAGM&ARW Joint Workshop Vision, Automation and Robotics, 2017.
    [BibTex]
    @InProceedings{TUW-201703101,
    Title = {A Visual Servoing Approach for a Six Degrees-of-Freedom Industrial Robot by RGB-D Sensing},
    Author = {Varhegyi, Thomas and Melik-Merkumians, Martin and Steinegger, Michael and Halmetschlager, Georg and Schitter, Georg},
    Booktitle = {Proceedings of the OAGM\&ARW Joint Workshop Vision, Automation and Robotics},
    Year = {2017},
    Doi = {10.3217/978-3-85125-524-9-14},
    }

2016

  • M. Bibl, M. Robin, M. Steinegger, and G. Schitter, Framework for Implementation of Iterative Learning Control on Programmable Logic Controllers, in Proceedings of 2016 IEEE 21th Conference on Emerging Technologies & Factory Automation, 2016.
    [BibTex]
    @InProceedings{TUW-251133,
    Title = {Framework for Implementation of Iterative Learning Control on Programmable Logic Controllers},
    Author = {Bibl, Matthias and Robin, Michael and Steinegger, Michael and Schitter, Georg},
    Booktitle = {Proceedings of 2016 IEEE 21th Conference on Emerging Technologies {\&} Factory Automation},
    Year = {2016},
    Note = {Posterpr{\"a}sentation: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin; 2016-09-06 -- 2016-09-09},
    Doi = {10.1109/ETFA.2016.7733619},
    Eid = {271},
    ISBN = {978-1-5090-1314-2},
    Keywords = {ILC, PLC,Norm-optimal, robot},
    Numpages = {4}
    }
  • F. Cigarini, E. K. Csencsics, R. Saathof, and G. Schitter, Design of Tuneable Damping for Precision Positioning of a Two-Body System, in Proceedings of the 7th IFAC Symposium on Mechatronic Systems, 2016, p. 222–227.
    [BibTex]
    @InProceedings{TUW-251116,
    Title = {Design of Tuneable Damping for Precision Positioning of a Two-Body System},
    Author = {Cigarini, Francesco and Csencsics, Ernst Karl and Saathof, Rudolf and Schitter, Georg},
    Booktitle = {Proceedings of the 7th IFAC Symposium on Mechatronic Systems},
    Year = {2016},
    Note = {Posterpr{\"a}sentation: 7th IFAC Symposium on Mechatronic Systems {\&} 15th Mechatronics Forum International Conference, Loughborough (Vereinigte K{\"o}nigreich); 2016-09-05 -- 2016-09-08},
    Pages = {222--227},
    Doi = {10.1016/j.ifacol.2016.10.554},
    Keywords = {Two-body systems, precision positioning, damping}
    }
  • E. K. Csencsics, R. Saathof, and G. Schitter, Design of a Dual-Tone Controller for Lissajous-based Scanning of Fast Steering Mirrors, in Proceeding of the 2016 American Control Conference, 2016, p. 461–466.
    [BibTex]
    @InProceedings{TUW-251547,
    Title = {Design of a Dual-Tone Controller for Lissajous-based Scanning of Fast Steering Mirrors},
    Author = {Csencsics, Ernst Karl and Saathof, Rudolf and Schitter, Georg},
    Booktitle = {Proceeding of the 2016 American Control Conference},
    Year = {2016},
    Note = {Vortrag: American Control Conference 2016, Boston (USA); 2016-07-06 -- 2016-07-08},
    Pages = {461--466},
    Doi = {10.1109/ACC.2016.7524957}
    }
  • E. K. Csencsics, M. Thier, P. Siegl, and G. Schitter, Mechatronic Design of an Active Two-body Vibration Isolation System, in Proceedings of the 7th IFAC Symposium on Mechatronic Systems, 2016, p. 133–140.
    [BibTex]
    @InProceedings{TUW-251120,
    Title = {Mechatronic Design of an Active Two-body Vibration Isolation System},
    Author = {Csencsics, Ernst Karl and Thier, Markus and Siegl, Philipp and Schitter, Georg},
    Booktitle = {Proceedings of the 7th IFAC Symposium on Mechatronic Systems},
    Year = {2016},
    Note = {Vortrag: 7th IFAC Symposium on Mechatronic Systems {\&} 15th Mechatronics Forum International Conference, Loughborough (Vereinigte K{\"o}nigreich); 2016-09-05 -- 2016-09-08},
    Pages = {133--140},
    Doi = {10.1016/j.ifacol.2016.10.532},
    Keywords = {Vibration isolation, Systems design, Mechanical decoupling, PID controllers, Reduced energy consumption}
    }
  • S. Ito, F. Cigarini, S. Unger, and G. Schitter, Flexure design for precision positioning using low-stiffness actuators, in Proceedings of the 7th IFAC Symposium on Mechatronic Systems, 2016, p. 200–205.
    [BibTex]
    @InProceedings{TUW-251121,
    Title = {Flexure design for precision positioning using low-stiffness actuators},
    Author = {Ito, Shingo and Cigarini, Francesco and Unger, Severin and Schitter, Georg},
    Booktitle = {Proceedings of the 7th IFAC Symposium on Mechatronic Systems},
    Year = {2016},
    Note = {Posterpr{\"a}sentation: 7th IFAC Symposium on Mechatronic Systems {\&} 15th Mechatronics Forum International Conference, Loughborough (Vereinigte K{\"o}nigreich); 2016-09-05 -- 2016-09-08},
    Pages = {200--205},
    Doi = {10.1016/j.ifacol.2016.10.548},
    Keywords = {Flexure, Lorentz actuator, voice coil motor, precision positioning}
    }
  • D. Kohl, P. Mesquida, and G. Schitter, Quantitative DC-free Kelvin Probe Force Microscopy, in Final Program 42nd International Conference on Micro and Nano Engineering, 2016.
    [BibTex]
    @InProceedings{TUW-254059,
    Title = {Quantitative DC-free Kelvin Probe Force Microscopy},
    Author = {Kohl, Dominik and Mesquida, Patrick and Schitter, Georg},
    Booktitle = {Final Program 42nd International Conference on Micro and Nano Engineering},
    Year = {2016},
    Note = {Vortrag: Micro and Nano Engineering 2016, VIenna; 2016-09-19 -- 2016-09-23},
    Doi = {10.1016/j.mee.2017.01.005},
    Numpages = {2}
    }
  • D. Kohl, D. Mick, T. Riel, R. Saathof, and G. Schitter, Extending the Range of Geophones by Negative Impedance Converter, in Proceedings of the 7th IFAC Symposium on Mechatronic Systems, 2016, p. 541–546.
    [BibTex]
    @InProceedings{TUW-254057,
    Title = {Extending the Range of Geophones by Negative Impedance Converter},
    Author = {Kohl, Dominik and Mick, Daniel and Riel, Thomas and Saathof, Rudolf and Schitter, Georg},
    Booktitle = {Proceedings of the 7th IFAC Symposium on Mechatronic Systems},
    Year = {2016},
    Note = {Vortrag: 7th IFAC Symposium on Mechatronic Systems {\&} 15th Mechatronics Forum International Conference, Loughborough (Vereinigte K{\"o}nigreich); 2016-09-05 -- 2016-09-08},
    Pages = {541--546},
    Volume = {49/21},
    Doi = {10.1016/j.ifacol.2016.10.658},
    ISSN = {2405-8963},
    Journal = {IFAC-PapersOnLine/Elsevier}
    }
  • D. Kohl, T. Riel, R. Saathof, J. Steininger, and G. Schitter, Auto-Tuning PI Controller for Surface Tracking in Atomic Force Microscopy – A Practical Approach, in Proceedings of the 2016 American Control Conference, 2016.
    [BibTex]
    @InProceedings{TUW-254062,
    Title = {Auto-Tuning PI Controller for Surface Tracking in Atomic Force Microscopy - A Practical Approach},
    Author = {Kohl, Dominik and Riel, Thomas and Saathof, Rudolf and Steininger, J{\"u}rgen and Schitter, Georg},
    Booktitle = {Proceedings of the 2016 American Control Conference},
    Year = {2016},
    Note = {Vortrag: 2016 American Control Conference, Boston (USA); 2016-07-06 -- 2016-07-08},
    Doi = {10.1109/ACC.2016.7526840},
    Numpages = {6}
    }
  • M. Melik-Merkumians, M. Baierling, and G. Schitter, A Service-Oriented Domain Specific Language Programming Approach for Batch Processes, in Proceedings of 2016 IEEE 21th Conference on Emerging Technologies & Factory Automation, 2016.
    [BibTex]
    @InProceedings{TUW-251132,
    Title = {A Service-Oriented Domain Specific Language Programming Approach for Batch Processes},
    Author = {Melik-Merkumians, Martin and Baierling, Matthias and Schitter, Georg},
    Booktitle = {Proceedings of 2016 IEEE 21th Conference on Emerging Technologies {\&} Factory Automation},
    Year = {2016},
    Note = {Vortrag: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin; 2016-09-06 -- 2016-09-09},
    Doi = {10.1109/ETFA.2016.7733729},
    Eid = {68},
    ISBN = {978-1-5090-1314-2},
    Keywords = {SOA, DSL, Batch Process, ISA-88, IEC 61499, component based automation, service based automation},
    Numpages = {9}
    }
  • S. Nahar, A. Schmets, G. Schitter, and A. Scarpas, Quantifying the Thermo-mechanical Response of Bitumen from Micro-Phase Properties, in TRB 95th Annual Meeting: Compendium of Papers, 2016.
    [BibTex]
    @InProceedings{TUW-242204,
    Title = {Quantifying the Thermo-mechanical Response of Bitumen from Micro-Phase Properties},
    Author = {Nahar, Sayeda and Schmets, Alexander and Schitter, Georg and Scarpas, Athanasios},
    Booktitle = {TRB 95th Annual Meeting: Compendium of Papers},
    Year = {2016},
    Note = {Vortrag: Transportation Research Board (TRB) 95th Annual Meeting, Washington DC, USA; 2016-01-10 -- 2016-01-14},
    Numpages = {16}
    }
  • T. Riel, R. Saathof, A. Katalenic, and G. Schitter, Tracking Performance Analysis and Control of a Small Robotic Telescope System, in AMOS 2016 Proceedings, 2016.
    [BibTex]
    @InProceedings{TUW-252685,
    Title = {Tracking Performance Analysis and Control of a Small Robotic Telescope System},
    Author = {Riel, Thomas and Saathof, Rudolf and Katalenic, Andelko and Schitter, Georg},
    Booktitle = {AMOS 2016 Proceedings},
    Year = {2016},
    Note = {Posterpr{\"a}sentation: Advanced Maui Optical Space Surveillance Technologies Conference (AMOS) 2016, Wailea, Hawaii (USA); 2016-09-20 -- 2016-09-23},
    Numpages = {8}
    }
  • T. Riel, A. Katalenic, R. Saathof, and G. Schitter, Dynamic Error Budgeting for a Friction-afflicted Permanent Magnet Synchronous Motor, in Proceedings ASPE 2016 Spring Topical Meeting – Precision Mechatronic SystemDesign and Control, 2016, p. 74–79.
    [BibTex]
    @InProceedings{TUW-249764,
    Title = {Dynamic Error Budgeting for a Friction-afflicted Permanent Magnet Synchronous Motor},
    Author = {Riel, Thomas and Katalenic, Andelko and Saathof, Rudolf and Schitter, Georg},
    Booktitle = {Proceedings ASPE 2016 Spring Topical Meeting - Precision Mechatronic SystemDesign and Control},
    Year = {2016},
    Note = {Vortrag: ASPE 2016 Spring Topic Meeting - Precision Mechatronic System Design and Control, Phoenix (USA); 2016-04-20 -- 2016-04-22},
    Pages = {74--79}
    }
  • T. Riel, R. Saathof, A. Katalenic, and G. Schitter, Noise Analysis and Improvement of a Permanent Magnet Synchronous Motor by Dynamic Error Budgeting, in Proceedings of the 7th IFAC Symposium on Mechatronic Systems, 2016, p. 339–346.
    [BibTex]
    @InProceedings{TUW-251115,
    Title = {Noise Analysis and Improvement of a Permanent Magnet Synchronous Motor by Dynamic Error Budgeting},
    Author = {Riel, Thomas and Saathof, Rudolf and Katalenic, Andelko and Schitter, Georg},
    Booktitle = {Proceedings of the 7th IFAC Symposium on Mechatronic Systems},
    Year = {2016},
    Note = {Vortrag: 7th IFAC Symposium on Mechatronic Systems {\&} 15th Mechatronics Forum International Conference, Loughborough (Vereinigte K{\"o}nigreich); 2016-09-05 -- 2016-09-08},
    Pages = {339--346},
    Doi = {10.1016/j.ifacol.2016.10.578},
    Keywords = {Dynamic Error Budgeting, Performance analysis, Error estimation, Servo systems, Permanent magnet motors}
    }
  • R. Saathof, T. Riel, M. Bibl, D. Kohl, H. W. Yoo, and G. Schitter, Non-parametric robustness analysis for feedback motion control for a high precision stage with large mass uncertainty, in Proceedings of the 2016 American Control Conference, 2016, p. 2611–2616.
    [BibTex]
    @InProceedings{TUW-254388,
    Title = {Non-parametric robustness analysis for feedback motion control for a high precision stage with large mass uncertainty},
    Author = {Saathof, Rudolf and Riel, Thomas and Bibl, Matthias and Kohl, Dominik and Yoo, Han Woong and Schitter, Georg},
    Booktitle = {Proceedings of the 2016 American Control Conference},
    Year = {2016},
    Note = {Vortrag: 2016 American Control Conference, Boston (USA); 2016-07-06 -- 2016-07-08},
    Pages = {2611--2616},
    Doi = {10.1109/ACC.2016.7525310}
    }
  • R. Saathof and G. Schitter, Low photon-count tip-tilt sensor, in AS16 Proceedings, 2016.
    [BibTex]
    @InProceedings{TUW-254393,
    Title = {Low photon-count tip-tilt sensor},
    Author = {Saathof, Rudolf and Schitter, Georg},
    Booktitle = {AS16 Proceedings},
    Year = {2016},
    Note = {Posterpr{\"a}sentation: SPIE Astronomical Telescopes + Instrumentation, Edinburgh (UK); 2016-06-26 -- 2016-07-01},
    Numpages = {8}
    }
  • A. Sinn, T. Riel, F. Deisl, R. Saathof, and G. Schitter, Low-Power Reflective Optical Communication System for Pico- and Nano-Satellites, in AMOS 2016 Proceedings, 2016, p. 1403–1410.
    [BibTex]
    @InProceedings{TUW-252989,
    Title = {Low-Power Reflective Optical Communication System for Pico- and Nano-Satellites},
    Author = {Sinn, Andreas and Riel, Thomas and Deisl, Florian and Saathof, Rudolf and Schitter, Georg},
    Booktitle = {AMOS 2016 Proceedings},
    Year = {2016},
    Note = {Posterpr{\"a}sentation: Advanced Maui Optical Space Surveillance Technologies Conference (AMOS) 2016, Wailea, Hawaii (USA); 2016-09-20 -- 2016-09-23},
    Pages = {1403--1410}
    }
  • M. Steinegger, M. Melik-Merkumians, J. Zajc, and G. Schitter, Automatic Generation of Diagnostic Handling Code for Decentralized PLC-based Control Architectures, in Proceedings of 2016 IEEE 21th Conference on Emerging Technologies & Factory Automation, 2016, p. 1–8.
    [BibTex]
    @InProceedings{TUW-252236,
    Title = {Automatic Generation of Diagnostic Handling Code for Decentralized PLC-based Control Architectures},
    Author = {Steinegger, Michael and Melik-Merkumians, Martin and Zajc, Johannes and Schitter, Georg},
    Booktitle = {Proceedings of 2016 IEEE 21th Conference on Emerging Technologies {\&} Factory Automation},
    Year = {2016},
    Note = {Vortrag: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin; 2016-09-06 -- 2016-09-09},
    Pages = {1--8},
    Doi = {10.1109/ETFA.2016.7733694},
    ISBN = {978-1-5090-1314-2}
    }
  • M. Steinegger, N. Plaschka, M. Melik-Merkumians, and G. Schitter, A Framework for Modular and Distributable Control of Reconfigurable Robotic Systems, in Proceedings of the IEEE International Conference on Industrial Technology, 2016, p. 848–853.
    [BibTex]
    @InProceedings{TUW-248717,
    Title = {A Framework for Modular and Distributable Control of Reconfigurable Robotic Systems},
    Author = {Steinegger, Michael and Plaschka, Nikolaus and Melik-Merkumians, Martin and Schitter, Georg},
    Booktitle = {Proceedings of the IEEE International Conference on Industrial Technology},
    Year = {2016},
    Note = {Vortrag: 2016 IEEE International Conference on Industrial Technology, Taipei, Taiwan; 2016-03-14 -- 2016-03-17},
    Pages = {848--853},
    Doi = {10.1109/ICIT.2016.7474862}
    }
  • M. Thier, R. Saathof, A. Sinn, R. Hainisch, and G. Schitter, Six Degree of Freedom Vibration Isolation Platform for In-Line Nano-Metrology, in Proceedings of the 7th IFAC Symposium on Mechatronic Systems, 2016, p. 149–156.
    [BibTex]
    @InProceedings{TUW-251134,
    Title = {Six Degree of Freedom Vibration Isolation Platform for In-Line Nano-Metrology},
    Author = {Thier, Markus and Saathof, Rudolf and Sinn, Andreas and Hainisch, Reinhard and Schitter, Georg},
    Booktitle = {Proceedings of the 7th IFAC Symposium on Mechatronic Systems},
    Year = {2016},
    Note = {Vortrag: 7th IFAC Symposium on Mechatronic Systems {\&} 15th Mechatronics Forum International Conference, Loughborough (Vereinigte K{\"o}nigreich); 2016-09-05 -- 2016-09-08},
    Pages = {149--156},
    Doi = {10.1016/j.ifacol.2016.10.534},
    Keywords = {Vibration isolation, Systems design, Nano-metrology, Precision positioning systems.}
    }
  • S. Unger, S. Ito, D. Kohl, and G. Schitter, Development of a Compact Atomic Force Microscope Based on an Optical Pickup Head, in Proceedings of the 7th IFAC Symposium on Mechatronic Systems, 2016, p. 629–635.
    [BibTex]
    @InProceedings{TUW-251149,
    Title = {Development of a Compact Atomic Force Microscope Based on an Optical Pickup Head},
    Author = {Unger, Severin and Ito, Shingo and Kohl, Dominik and Schitter, Georg},
    Booktitle = {Proceedings of the 7th IFAC Symposium on Mechatronic Systems},
    Year = {2016},
    Note = {Vortrag: 7th IFAC Symposium on Mechatronic Systems {\&} 15th Mechatronics Forum International Conference, Loughborough (Vereinigte K{\"o}nigreich); 2016-09-05 -- 2016-09-08},
    Pages = {629--635},
    Doi = {10.1016/j.ifacol.2016.10.671},
    Keywords = {atomic force microscopy, optical pickup head, precision measurements, flexure based nanopositioning, voice coil motor}
    }
  • H. W. Yoo, M. E. van Royen, W. A. van Cappellen, A. B. Houtsmuller, M. Verhaegen, and G. Schitter, Adaptive Optics for Confocal Laser Scanning Microscopy with Adjustable Pinhole, in Proceedings of SPIE Vol. 9887, Biophotonics: Photonic Solutions for Better Health Care V, 9887, 2016, p. 1–11.
    [BibTex]
    @InProceedings{TUW-249261,
    Title = {Adaptive Optics for Confocal Laser Scanning Microscopy with Adjustable Pinhole},
    Author = {Yoo, Han Woong and van Royen, Martin E. and van Cappellen, Wiggert A. and Houtsmuller, Adriaan B. and Verhaegen, Michel and Schitter, Georg},
    Booktitle = {Proceedings of SPIE Vol. 9887, Biophotonics: Photonic Solutions for Better Health Care V},
    Year = {2016},
    Address = {9887},
    Note = {Vortrag: SPIE Photonics Europe 2016, Brussels (Belgium); 2016-04-03 -- 2016-04-07},
    Pages = {1--11},
    ISSN = {0967-0661},
    Keywords = {Adaptive Optics, Square Adjustable Pinhole, Confocal Laser Scanning Microscopy, Pinhole Intensity Ratio}
    }

2015

  • S. Ito, D. Neyer, S. Pirker, J. Steininger, and G. Schitter, Atomic Force Microscopy Using Voice Coil Actuators for Vibration Isolation, in Proceedings of the IEEE/ASME International conference on advanced intelligent mechatronics AIM2015, 2015.
    [BibTex]
    @InProceedings{TUW-238919,
    Title = {Atomic Force Microscopy Using Voice Coil Actuators for Vibration Isolation},
    Author = {Ito, Shingo and Neyer, Daniel and Pirker, Stefan and Steininger, J{\"u}rgen and Schitter, Georg},
    Booktitle = {Proceedings of the IEEE/ASME International conference on advanced intelligent mechatronics AIM2015},
    Year = {2015},
    Note = {Vortrag: IEEE/ASME International conference on advanced intelligent mechatronics AIM2015, Busan (South Korea); 2015-07-07 -- 2015-07-11},
    Doi = {10.1109/AIM.2015.7222578},
    Numpages = {6}
    }
  • S. Nahar, A. Schmets, C. Kasbergen, G. Schitter, and A. Scarpas, Self-Healing of Bituminous Materials by Damage Reversal at the Microstructural Scale, in Annual Meeting Compendium of Papers, 2015.
    [BibTex]
    @InProceedings{TUW-232035,
    Title = {Self-Healing of Bituminous Materials by Damage Reversal at the Microstructural Scale},
    Author = {Nahar, Sayeda and Schmets, Alexander and Kasbergen, Cor and Schitter, Georg and Scarpas, Athanasios},
    Booktitle = {Annual Meeting Compendium of Papers},
    Year = {2015},
    Note = {Posterpr{\"a}sentation: Transportation Research Board (TRB) 94th Annual Meeting, Washington DC, USA; 2015-01-11 -- 2015-01-15},
    Numpages = {15}
    }
  • R. Paris, M. Melik-Merkumians, and G. Schitter, Vision-based Probabilistic Absolute Position Sensor, in Proceedings of the IEEE International Instrumentation and Measurement Technology Conference (I2MTC) 2015, 2015, p. 2066–2071.
    [BibTex]
    @InProceedings{TUW-239812,
    Title = {Vision-based Probabilistic Absolute Position Sensor},
    Author = {Paris, Ren{\'e} and Melik-Merkumians, Martin and Schitter, Georg},
    Booktitle = {Proceedings of the IEEE International Instrumentation and Measurement Technology Conference (I2MTC) 2015},
    Year = {2015},
    Note = {Vortrag: IEEE International Instrumentation and Measurement Technology Conference (I2MTC) 2015, Pisa; 2015-05-11 -- 2015-05-14},
    Pages = {2066--2071},
    Doi = {10.1109/I2MTC.2015.7151601},
    ISBN = {978-1-4799-6113-9}
    }
  • G. Schitter, Advanced Mechatronics for Precision Engineering and Mechatronic Imaging Systems, in Proceedings of the 8th Vienna International Conference on Mathematical Modelling (MATHMOD), 2015, p. 942–943.
    [BibTex]
    @InProceedings{TUW-238449,
    Title = {Advanced Mechatronics for Precision Engineering and Mechatronic Imaging Systems},
    Author = {Schitter, Georg},
    Booktitle = {Proceedings of the 8th Vienna International Conference on Mathematical Modelling (MATHMOD)},
    Year = {2015},
    Note = {Vortrag: 8th Vienna International Conference on Mathematical Modelling, Vienna, Austria; 2015-02-18 -- 2015-02-20},
    Pages = {942--943},
    Doi = {10.1016/j.ifacol.2015.05.171},
    Keywords = {precision engineering, motion control, mechatronics, scanning probe microscopy, system integration, model-based control.}
    }
  • M. Thier, R. Saathof, R. Hainisch, and G. Schitter, Vibration Compensation Platform for Robot-based Nanoscale Measurements, in Proceedings of the 15th international conference of the european society for precision engineering and nanotechnology, 2015, p. 211–212.
    [BibTex]
    @InProceedings{TUW-244712,
    Title = {Vibration Compensation Platform for Robot-based Nanoscale Measurements},
    Author = {Thier, Markus and Saathof, Rudolf and Hainisch, Reinhard and Schitter, Georg},
    Booktitle = {Proceedings of the 15th international conference of the european society for precision engineering and nanotechnology},
    Year = {2015},
    Note = {Vortrag: euspen's 15th International Conference {\&} Exhibition, Leuven (Belgium); 2015-06-01 -- 2015-06-05},
    Pages = {211--212},
    ISBN = {978-0-9566790-7-9},
    Keywords = {Active vibration isolation, Nanometrology, Mechatronic system design, High precision measurement}
    }

2014

  • J. Fraxedas, U. Staufer, R. Munnig Schmidt, J. W. Spronck, E. R. Trinidad, R. Deng, G. Schitter, M. Thier, S. Messineo, S. Ito, R. Hainisch, R. Saathof, F. Perez-Murano, A. Verdaguer, A. Blümel, E. J. W. List-Kratochvil, R. Koops, M. van Veghel, R. Sum, A. Lieb, W. Schott, D. Dontsov, T. Sulzbach, W. Engl, C. Penzkofer, C. Colominas, K. Fluch, A. Garcia-Granada, J. Puigoriol-Forcada Josep MariaFraxedas, U. Staufer, R. Munnig Schmidt, J. W. Spronck, E. R. Trinidad, R. Deng, G. Schitter, M. Thier, S. Messineo, S. Ito, R. Hainisch, R. Saathof, F. Perez-Murano, A. Verdaguer, A. Blümel, E. J. W. List-Kratochvil, R. Koops, M. van Veghel, R. Sum, A. Lieb, W. Schott, D. Dontsov, T. Sulzbach, W. Engl, C. Penzkofer, C. Colominas, K. Fluch, A. Garcia-Granada, and J. M. Puigoriol-Forcada, Automated inline Metrology for Nanoscale Production – aim4np, in 3rd International Conference on Industrial Technologies Research and Innovation, 2014.
    [BibTex]
    @Conference{TUW-236535,
    Title = {Automated inline Metrology for Nanoscale Production - aim4np},
    Author = {Fraxedas, Jordi and Staufer, Urs and Munnig Schmidt, Robert and Spronck, Jo W. and Trinidad, Enrique Rull and Deng, Ruijun and Schitter, Georg and Thier, Markus and Messineo, Saverio and Ito, Shingo and Hainisch, Reinhard and Saathof, Rudolf and Perez-Murano, Francesc and Verdaguer, Albert and Bl{\"u}mel, Alexander and List-Kratochvil, Emil J. W. and Koops, Richard and van Veghel, Marijn and Sum, Robert and Lieb, Andreas and Schott, Walter and Dontsov, Denys and Sulzbach, Thomas and Engl, Wolfgang and Penzkofer, Christian and Colominas, Carles and Fluch, Karl and Garcia-Granada, Andr{\'e}s-Amador and Puigoriol-Forcada, Josep MariaFraxedas, Jordi and Staufer, Urs and Munnig Schmidt, Robert and Spronck, Jo W. and Trinidad, Enrique Rull and Deng, Ruijun and Schitter, Georg and Thier, Markus and Messineo, Saverio and Ito, Shingo and Hainisch, Reinhard and Saathof, Rudolf and Perez-Murano, Francesc and Verdaguer, Albert and Bl{\"u}mel, Alexander and List-Kratochvil, Emil J. W. and Koops, Richard and van Veghel, Marijn and Sum, Robert and Lieb, Andreas and Schott, Walter and Dontsov, Denys and Sulzbach, Thomas and Engl, Wolfgang and Penzkofer, Christian and Colominas, Carles and Fluch, Karl and Garcia-Granada, Andr{\'e}s-Amador and Puigoriol-Forcada, Josep Maria},
    Booktitle = {3rd International Conference on Industrial Technologies Research and Innovation},
    Year = {2014},
    Doi = {10.13140/2.1.3459.3607},
    }
  • R. Hametner, I. Hegny, and A. Zoitl, A Unit-Test Framework for Event-Driven Control Components Modeled in IEC 61499, in Proceedings of the 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2014), 2014.
    [BibTex]
    @InProceedings{TUW-230870,
    Title = {A Unit-Test Framework for Event-Driven Control Components Modeled in IEC 61499},
    Author = {Hametner, Reinhard and Hegny, Ingo and Zoitl, Alois},
    Booktitle = {Proceedings of the 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2014)},
    Year = {2014},
    Note = {Vortrag: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2014), Barcelona (Spain); 2014-09-16 -- 2014-09-19},
    Doi = {10.1109/ETFA.2014.7005209},
    ISBN = {978-1-4799-4846-8},
    Keywords = {Industrial control systems, automation systems, test process for automation software, unit testing, IEC 61499},
    Numpages = {8},
    }
  • S. Ito, J. Steininger, and G. Schitter, Sliding Mode and PID Control of a Dual Stage Actuator for Precision Positioning, in Proceedings of the 19th World Congress of the International Federation of Automatic Control, 19/1, 2014, p. 6550–6555.
    [BibTex]
    @InProceedings{TUW-230384,
    Title = {Sliding Mode and PID Control of a Dual Stage Actuator for Precision Positioning},
    Author = {Ito, Shingo and Steininger, J{\"u}rgen and Schitter, Georg},
    Booktitle = {Proceedings of the 19th World Congress of the International Federation of Automatic Control},
    Year = {2014},
    Address = {19/1},
    Note = {Vortrag: 19th IFAC World Congress, Cape Town (South Africa); 2014-08-24 -- 2014-08-29},
    Pages = {6550--6555},
    Publisher = {International Federation of Automatic Control},
    Doi = {10.3182/20140824-6-ZA-1003.00338},
    ISBN = {978-3-902823-62-5}
    }
  • S. Nahar, J. Qiu, A. Schmets, E. Schlangen, M. Shirazi, M. Van de Ven, G. Schitter, and A. Scarpas, Turning Back Time: Rheological and Microstructural Assessment of Rejuvenated Bitumen, in Proceedings of the Transportation Research Board 93rd annual meeting 2014, 2014.
    [BibTex]
    @InProceedings{TUW-232169,
    Title = {Turning Back Time: Rheological and Microstructural Assessment of Rejuvenated Bitumen},
    Author = {Nahar, Sayeda and Qiu, Jian and Schmets, Alexander and Schlangen, Erik and Shirazi, Morteza and Van de Ven, Martin and Schitter, Georg and Scarpas, Athanasios},
    Booktitle = {Proceedings of the Transportation Research Board 93rd annual meeting 2014},
    Year = {2014},
    Note = {Posterpr{\"a}sentation: Transportation Research Board (TRB) 93rd Annual Meeting, Washington DC, USA; 2014-01-12 -- 2014-01-16},
    Numpages = {16}
    }
  • S. Nahar, A. Schmets, G. Schitter, and A. Scarpas, Quantitative nanomechanical property mapping of bitumen micro-phases by peak-force Atomic Force Microscopy, in Asphalt Pavements, 2014, p. 1397–1406.
    [BibTex]
    @InProceedings{TUW-230213,
    Title = {Quantitative nanomechanical property mapping of bitumen micro-phases by peak-force Atomic Force Microscopy},
    Author = {Nahar, Sayeda and Schmets, Alexander and Schitter, Georg and Scarpas, Athanasios},
    Booktitle = {Asphalt Pavements},
    Year = {2014},
    Note = {Vortrag: International Conference on Asphalt Pavements, Raleigh, North Carolina, USA; 2014-06-01 -- 2014-06-05},
    Pages = {1397--1406},
    Publisher = {Taylor {\&} Francis Group},
    ISBN = {978-1-138-02693-3},
    Keywords = {bitumen, nanomechanical properties, Peak Force AFM, Derjaguin-Muller- Toporov model}
    }
  • J. Steininger, R. Paris, and G. Schitter, Increasing sensitivity while reducing crosstalk of the force sensor in atomic force microscopes, in Proceedings of the 14th International Conference of the European Society for Precision Engineering and Nanotechnology, 2014, p. 321–324.
    [BibTex]
    @InProceedings{TUW-229780,
    Title = {Increasing sensitivity while reducing crosstalk of the force sensor in atomic force microscopes},
    Author = {Steininger, J{\"u}rgen and Paris, Ren{\'e} and Schitter, Georg},
    Booktitle = {Proceedings of the 14th International Conference of the European Society for Precision Engineering and Nanotechnology},
    Year = {2014},
    Note = {Posterpr{\"a}sentation: 14th International Conference and Exhibition of the European Society for Precision Engineering {\&} Nanotechnology, Dubrovnik, Croatia; 2014-06-02 -- 2014-06-06},
    Pages = {321--324},
    ISBN = {978-0-9566790-3-1},
    Journal = {Euspen}
    }
  • J. Steininger, R. Paris, and G. Schitter, Improving the Deflection Readout Mechanism of an Atomic Force Microscope, in MESS14 Microelectronic Systems Symposium, Band 76 der OVE-Schriftenreihe, 76, 2014, p. 22.
    [BibTex]
    @InProceedings{TUW-229786,
    Title = {Improving the Deflection Readout Mechanism of an Atomic Force Microscope},
    Author = {Steininger, J{\"u}rgen and Paris, Ren{\'e} and Schitter, Georg},
    Booktitle = {MESS14 Microelectronic Systems Symposium, Band 76 der OVE-Schriftenreihe},
    Year = {2014},
    Address = {76},
    Note = {Posterpr{\"a}sentation: MESS14 Microelectronic Systems Symposium, Vienna; 2014-05-08 -- 2014-05-09},
    Pages = {22},
    ISBN = {978-3-85133-082-3}
    }
  • J. Steininger and G. Schitter, Influence of the Photodetector Geometry on the Deflection Measurement in Atomic Force Microscopes, in Proceedings of the ASPE 2014 Annual Meeting, 2014, p. 674–679.
    [BibTex]
    @InProceedings{TUW-233073,
    Title = {Influence of the Photodetector Geometry on the Deflection Measurement in Atomic Force Microscopes},
    Author = {Steininger, J{\"u}rgen and Schitter, Georg},
    Booktitle = {Proceedings of the ASPE 2014 Annual Meeting},
    Year = {2014},
    Note = {Vortrag: ASPE 2014 Annual Meeting, Boston (USA); 2014-11-09 -- 2014-11-14},
    Pages = {674--679},
    ISBN = {978-1-887706-66-7}
    }

2013

  • P. I. Chang, D. Chavan, R. Paris, D. Iannuzzi, and G. Schitter, Towards High Speed Ferrule-Top Atomic Force Microscopy, in Proceedings of 6th IFAC Symposium on Mechatronic Systems, 2013, p. 132–137.
    [BibTex]
    @InProceedings{TUW-222987,
    Title = {Towards High Speed Ferrule-Top Atomic Force Microscopy},
    Author = {Chang, Peter I. and Chavan, Dhwajal and Paris, Ren{\'e} and Iannuzzi, Davide and Schitter, Georg},
    Booktitle = {Proceedings of 6th IFAC Symposium on Mechatronic Systems},
    Year = {2013},
    Note = {Vortrag: 6th IFAC Symposium on Mechatronic Systems, Hangzhou, China; 2013-04-10 -- 2013-04-12},
    Pages = {132--137},
    Doi = {10.3182/20130410-3-CN-2034.00051}
    }
  • R. Hametner, G. Schitter, A. Voigt, and A. Zoitl, Implementation Guidelines for Closed Loop Control Algorithms on PLCs, in 2013 IEEE International Conference on Industrial Technology, 2013, p. 1297–1302.
    [BibTex]
    @InProceedings{TUW-222303,
    Title = {Implementation Guidelines for Closed Loop Control Algorithms on PLCs},
    Author = {Hametner, Reinhard and Schitter, Georg and Voigt, Andreas and Zoitl, Alois},
    Booktitle = {2013 IEEE International Conference on Industrial Technology},
    Year = {2013},
    Note = {Vortrag: 2013 IEEE International Conference on Industrial Technology, Capetown, S{\"u}dafrika; 2013-02-25 -- 2013-02-28},
    Pages = {1297--1302},
    Doi = {10.1109/ICIT.2013.6505860},
    ISBN = {978-1-4673-4568-2},
    Keywords = {Automatic control systems development, Industrial automation systems, IEC 61499}
    }
  • S. Ito, J. Steininger, P. I. Chang, and G. Schitter, High-precision Positioning System using a Low-stiffness Dual Stage Actuator, in Proceedings of 6th IFAC Symposium on Mechatronic Systems, 2013, p. 20–27.
    [BibTex]
    @InProceedings{TUW-222312,
    Title = {High-precision Positioning System using a Low-stiffness Dual Stage Actuator},
    Author = {Ito, Shingo and Steininger, J{\"u}rgen and Chang, Peter I. and Schitter, Georg},
    Booktitle = {Proceedings of 6th IFAC Symposium on Mechatronic Systems},
    Year = {2013},
    Note = {Vortrag: 6th IFAC Symposium on Mechatronic Systems, Hangzhou, China; 2013-04-10 -- 2013-04-12},
    Pages = {20--27},
    Doi = {10.3182/20130410-3-CN-2034.00025},
    Keywords = {dual stage actuator, high precision positioning system, Lorentz actuator, low stiffness actuator}
    }
  • S. Ito, J. Steininger, and G. Schitter, Influence of fine actuator stiffness in dual stage actuation on vibration isolation properties, in Proceedings of: Precision Control for Advanced Manufacturing Systems, 2013, p. 126–130.
    [BibTex]
    @InProceedings{TUW-222405,
    Title = {Influence of fine actuator stiffness in dual stage actuation on vibration isolation properties},
    Author = {Ito, Shingo and Steininger, J{\"u}rgen and Schitter, Georg},
    Booktitle = {Proceedings of: Precision Control for Advanced Manufacturing Systems},
    Year = {2013},
    Note = {Vortrag: ASPE 2013 Spring Topical Meeting, Cambridge, Massachusetts, USA; 2013-04-21 -- 2013-04-23},
    Pages = {126--130},
    ISBN = {978-1-887706-62-9}
    }
  • W. Lepuschitz, B. Groessing, M. Merdan, and G. Schitter, Evaluation of a Multi-Agent Approach for a Real Transportation System, in 2013 IEEE International Conference on Industrial Technology, 2013, p. 1273–1278.
    [BibTex]
    @InProceedings{TUW-222406,
    Title = {Evaluation of a Multi-Agent Approach for a Real Transportation System},
    Author = {Lepuschitz, Wilfried and Groessing, Benjamin and Merdan, Munir and Schitter, Georg},
    Booktitle = {2013 IEEE International Conference on Industrial Technology},
    Year = {2013},
    Note = {Vortrag: 2013 IEEE International Conference on Industrial Technology, Capetown, S{\"u}dafrika; 2013-02-25 -- 2013-02-28},
    Pages = {1273--1278},
    Doi = {10.1109/ICIT.2013.6505856},
    ISBN = {978-1-4673-4568-2}
    }
  • A. van Loon, K. Keune, J. Dik, D. Kohl, P. I. Chang, and G. Schitter, Analytical Spectroscopy in Art and Archaeology, in Book of Abstracts – Technart 2013, 2013.
    [BibTex]
    @InProceedings{TUW-221915,
    Title = {Analytical Spectroscopy in Art and Archaeology},
    Author = {van Loon, Annelies and Keune, Katrien and Dik, Joris and Kohl, Dominik and Chang, Peter I. and Schitter, Georg},
    Booktitle = {Book of Abstracts - Technart 2013},
    Year = {2013},
    Note = {Vortrag: Technart 2013, Amsterdam, Netherlands; 2013-09-23 -- 2013-09-26}
    }
  • S. Nahar, B. Dillingh, S. Erkens, A. Schmets, H. R. Fischer, A. Scarpas, and G. Schitter, Is Atomic Force Microscopy suited as tool for fast screening of bituminous materials? An inter-laboratory comparison study, in TRB 92nd Annual Meeting Compendium of Papers, 2013.
    [BibTex]
    @InProceedings{TUW-225106,
    Title = {Is Atomic Force Microscopy suited as tool for fast screening of bituminous materials? An inter-laboratory comparison study},
    Author = {Nahar, Sayeda and Dillingh, Bert and Erkens, Sandra and Schmets, Alexander and Fischer, Hartmut R. and Scarpas, Athanasios and Schitter, Georg},
    Booktitle = {TRB 92nd Annual Meeting Compendium of Papers},
    Year = {2013},
    Note = {Posterpr{\"a}sentation: Transportation Research Board (TRB) 92nd Annual Meeting, Washington DC, USA; 2013-01-13 -- 2013-01-17},
    Numpages = {16}
    }
  • S. Nahar, A. Schmets, A. Scarpas, and G. Schitter, Temperature induced healing in strained bituminous materials observed by atomic force microscopy, in Proceedings of the 4th International Conference on Self-Healing Materials, 2013, p. 489–493.
    [BibTex]
    @InProceedings{TUW-224330,
    Title = {Temperature induced healing in strained bituminous materials observed by atomic force microscopy},
    Author = {Nahar, Sayeda and Schmets, Alexander and Scarpas, Athanasios and Schitter, Georg},
    Booktitle = {Proceedings of the 4th International Conference on Self-Healing Materials},
    Year = {2013},
    Note = {Vortrag: Fourth International Conference on Self-Healing Materials, Ghent, Belgium; 2013-06-16 -- 2013-06-20},
    Pages = {489--493},
    ISBN = {9789082073706},
    Keywords = {Bitumen, microstructure, atomic force microscope}
    }
  • R. Paris, T. Thurner, and G. Schitter, Compensation Based Displacement Measurement Using Objective Laser Speckles, in Proceedings of 6th IFAC Symposium on Mechatronic Systems, 2013, p. 264–270.
    [BibTex]
    @InProceedings{TUW-222311,
    Title = {Compensation Based Displacement Measurement Using Objective Laser Speckles},
    Author = {Paris, Ren{\'e} and Thurner, Thomas and Schitter, Georg},
    Booktitle = {Proceedings of 6th IFAC Symposium on Mechatronic Systems},
    Year = {2013},
    Note = {Vortrag: 6th IFAC Symposium on Mechatronic Systems, Hangzhou, China; 2013-04-10 -- 2013-04-12},
    Pages = {264--270},
    Doi = {10.3182/20130410-3-CN-2034.00004},
    Keywords = {Compensating feedback, Displacement sensor, Objective laser speckles, Speckle decorrelation}
    }
  • A. Prostejovsky, M. Merdan, G. Schitter, and A. Dimeas, Demonstration of a Multi-Agent-Based Control System for Active Electric Power Distribution Grids, in Proceedings of the IEEE International Workshop on Intelligent Energy Systems (IWIES’13), 2013, p. 76–81.
    [BibTex]
    @InProceedings{TUW-222381,
    Title = {Demonstration of a Multi-Agent-Based Control System for Active Electric Power Distribution Grids},
    Author = {Prostejovsky, Alexander and Merdan, Munir and Schitter, Georg and Dimeas, Aris},
    Booktitle = {Proceedings of the IEEE International Workshop on Intelligent Energy Systems (IWIES'13)},
    Year = {2013},
    Note = {Vortrag: 2013 IEEE International Workshop on Intelligent Energy Systems (IWIES), Wien; 2013-11-11 -- 2013-11-14},
    Pages = {76--81},
    Doi = {10.1109/IWIES.2013.6698565},
    ISBN = {978-1-4799-1134-9}
    }
  • M. Rodler, M. Melik-Merkumians, W. Lepuschitz, and M. Merdan, Visualization of an Agent-based Batch Process System, in 2013 IEEE International Conference on Industrial Technology, 2013.
    [BibTex]
    @Conference{TUW-031020172,
    Title = {Visualization of an Agent-based Batch Process System},
    Author = {Rodler, M. and Melik-Merkumians, M. and Lepuschitz, W. and Merdan, M.},
    Booktitle = {2013 IEEE International Conference on Industrial Technology},
    Year = {2013},
    Doi = {10.1109/ICIT.2013.6505880},
    }
  • M. Steinegger, A. Zoitl, M. Fein, and G. Schitter, Design Patterns for Separating Fault Handling from Control Code in Discrete Manufacturing Systems, in Proc. of the 39th Annual Conference of the IEEE Industrial Electronics Society, 2013, p. 4366–4371.
    [BibTex]
    @InProceedings{TUW-221316,
    Title = {Design Patterns for Separating Fault Handling from Control Code in Discrete Manufacturing Systems},
    Author = {Steinegger, Michael and Zoitl, Alois and Fein, Martin and Schitter, Georg},
    Booktitle = {Proc. of the 39th Annual Conference of the IEEE Industrial Electronics Society},
    Year = {2013},
    Note = {Vortrag: 39th Annual Conference of the IEEE Industrial Electronics Society, Vienna; 2013-11-10 -- 2013-11-13},
    Pages = {4366--4371},
    Doi = {10.1109/IECON.2013.6699838}
    }
  • H. W. Yoo, S. Ito, M. Verhaegen, and G. Schitter, Transformation-based Iterative Learning Control for Non-collocated Sensing of a Galvanometer Scanner, in Proceedings of European Control Conference ECC 2013, 2013, p. 1204–1209.
    [BibTex]
    @InProceedings{TUW-222776,
    Title = {Transformation-based Iterative Learning Control for Non-collocated Sensing of a Galvanometer Scanner},
    Author = {Yoo, Han Woong and Ito, Shingo and Verhaegen, Michel and Schitter, Georg},
    Booktitle = {Proceedings of European Control Conference ECC 2013},
    Year = {2013},
    Note = {Vortrag: European Control Conference ECC 2013, Z{\"u}rich; 2013-07-17 -- 2013-07-19},
    Pages = {1204--1209}
    }

2012

  • F. Andren, T. Strasser, A. Zoitl, and I. Hegny, A Reconfigurable Communication Gateway for Distributed Embedded Control Systems, in IECON 2012 – 38th Annual Conference on IEEE Industrial Electronics Society, 2012, p. 3700–3706.
    [BibTex]
    @InProceedings{TUW-211326,
    Title = {A Reconfigurable Communication Gateway for Distributed Embedded Control Systems},
    Author = {Andren, Filip and Strasser, Thomas and Zoitl, Alois and Hegny, Ingo},
    Booktitle = {IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society},
    Year = {2012},
    Note = {Vortrag: IECON, Montreal, Canada; 2012-10-25 -- 2012-10-28},
    Pages = {3700--3706},
    ISBN = {978-1-4673-2420-5},
    Url = {http://publik.tuwien.ac.at/files/PubDat_211326.pdf}
    }
  • R. Hametner, D. Winkler, and A. Zoitl, Agile Testing Concepts Based on Keyword-driven Testing for Industrial Automation Systems, in IECON 2012 – 38th Annual Conference on IEEE Industrial Electronics Society, 2012, p. 3707–3712.
    [BibTex]
    @InProceedings{TUW-211320,
    Title = {Agile Testing Concepts Based on Keyword-driven Testing for Industrial Automation Systems},
    Author = {Hametner, Reinhard and Winkler, Dietmar and Zoitl, Alois},
    Booktitle = {IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society},
    Year = {2012},
    Note = {Vortrag: IECON, Montreal, Canada; 2012-10-25 -- 2012-10-28},
    Pages = {3707--3712},
    Doi = {10.1109/IECON.2012.6389298},
    ISBN = {978-1-4673-2420-5},
    Keywords = {Industrial Control Applications, IEC 61131-3, IEC 61499, Test Automation, Keyword-driven Test},
    }
  • I. Hegny, T. Strasser, M. Melik-Merkumians, M. Wenger, and Zo, Towards an Increased Reusability of Distributed Control Applications Modeled in IEC 61499, in Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies and Factory Automation (ETFA 2012), 2012.
    [BibTex]
    @InProceedings{TUW-031020175,
    Title = {Towards an Increased Reusability of Distributed Control Applications Modeled in IEC 61499},
    Author = {Hegny, I. and Strasser, T. and Melik-Merkumians, M. and Wenger, M. and Zo},
    Booktitle = {Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies and Factory Automation (ETFA 2012)},
    Year = {2012},
    Doi = {10.1109/ETFA.2012.6489639},
    }
  • S. Ito, J. Steininger, P. I. Chang, and G. Schitter, Control of a long range high-precision positioning system, in Tagungsband GMA-Fachausschuss 1.30 ”Modellbildung, Identifikation und Simualtion in der Automatisierungstechnik”, Darmstadt, 2012, p. 56.
    [BibTex]
    @InProceedings{TUW-210812,
    Title = {Control of a long range high-precision positioning system},
    Author = {Ito, Shingo and Steininger, J{\"u}rgen and Chang, Peter I. and Schitter, Georg},
    Booktitle = {Tagungsband GMA-Fachausschuss 1.30 ''Modellbildung, Identifikation und Simualtion in der Automatisierungstechnik''},
    Year = {2012},
    Address = {Darmstadt},
    Note = {Vortrag: Workshop des VDI/VDE-GMA Fachausschusses 1.30 ''Modelling, Identifikation und Simulation in der Automatisierungstechnik'', Salzburg, {\"O}sterreich; 2012-09-20 -- 2012-09-21},
    Pages = {56},
    Publisher = {Technische Universit{\"a}t Darmstadt Institut f{\"u}r Automatisierungstechnik und Mechatronik},
    ISBN = {978-3-9815012-2-3},
    Keywords = {long range, high-precision, positioning, Dual Stage Actuation},
    Url = {http://publik.tuwien.ac.at/files/PubDat_210812.pdf}
    }
  • G. Koppensteiner, C. Schwingenschlögl, M. Merdan, and A. Zoitl, Implementation of an Event-based Low-Level Control for Mobile Robots, in Proceedings on the 19th International Conference on Mechatronics and Machine Vision in Practice (M2VIP12), 2012.
    [BibTex]
    @InProceedings{TUW-216964,
    Title = {Implementation of an Event-based Low-Level Control for Mobile Robots},
    Author = {Koppensteiner, Gottfried and Schwingenschl{\"o}gl, Christian and Merdan, Munir and Zoitl, Alois},
    Booktitle = {Proceedings on the 19th International Conference on Mechatronics and Machine Vision in Practice (M2VIP12)},
    Year = {2012},
    Note = {Vortrag: 19th International Conference on Mechatronics and Machine Vision in Practice (M2VIP12), Auckland, New Zealand; 2012-11-28 -- 2012-11-30},
    Numpages = {6},
    }
  • S. Kuiper, P. M. J. Van den Hof, and G. Schitter, Trade-off between the control bandwidth and the measurement accuracy in Atomic Force Microscopy, in Proceedings on IEEE Instrumentation and Measurement Technology Conference (I2MTC), 2012, p. 888–893.
    [BibTex]
    @InProceedings{TUW-211820,
    Title = {Trade-off between the control bandwidth and the measurement accuracy in Atomic Force Microscopy},
    Author = {Kuiper, Stefan and Van den Hof, Paul M. J. and Schitter, Georg},
    Booktitle = {Proceedings on IEEE Instrumentation and Measurement Technology Conference (I2MTC)},
    Year = {2012},
    Note = {Vortrag: IEEE International Instrumentation and Measurement Technology Conference (2012 I2MTC), Graz; 2012-05-13 -- 2012-05-16},
    Pages = {888--893},
    Doi = {10.1109/I2MTC.2012.6229192}
    }
  • M. Melik-Merkumians, T. Baier, M. Steinegger, W. Lepuschitz, I. Hegny, and A. Zoitl, Towards OPC UA as portable SOA Middleware between Control Software and External Added Value Applications, in Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies and Factory Automation (ETFA 2012), 2012.
    [BibTex]
    @InProceedings{TUW-031020174,
    Title = {Towards OPC UA as portable SOA Middleware between Control Software and External Added Value Applications},
    Author = {Melik-Merkumians, M. and Baier, T. and Steinegger, M. and Lepuschitz, W. and Hegny, I. and Zoitl, A.},
    Booktitle = {Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies and Factory Automation (ETFA 2012)},
    Year = {2012},
    Doi = {10.1109/ETFA.2012.6489640},
    }
  • M. Merdan, P. Vrba, and M. Melik-Merkumians, Test-Driven Agent-Oriented Software Development, in Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies and Factory Automation (ETFA 2012), 2012.
    [BibTex]
    @InProceedings{TUW-0310201780,
    Title = {Test-Driven Agent-Oriented Software Development},
    Author = {Merdan, M. and Vrba, P. and Melik-Merkumians, M.},
    Booktitle = {Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies and Factory Automation (ETFA 2012)},
    Year = {2012},
    Url = {https://publik.tuwien.ac.at/files/PubDat_209961.pdf}
    }
  • P. Novak, M. Melik-Merkumians, M. Steinegger, T. Moser, R. Sindelar, and A. Zoitl, Semantic Runtime Interface Description Based on Engineering Knowledge, in Proceedings of the 14th IFAC Symposium on Information Control Problems in Manufacturing, 2012.
    [BibTex]
    @InProceedings{TUW-031020177,
    Title = {Semantic Runtime Interface Description Based on Engineering Knowledge},
    Author = {Novak, P and Melik-Merkumians, M. and Steinegger, M. and Moser, T. and Sindelar, R. and Zoitl, A.},
    Booktitle = {Proceedings of the 14th IFAC Symposium on Information Control Problems in Manufacturing},
    Year = {2012},
    }
  • R. Paris, M. Thier, T. Thurner, and G. Schitter, ‘Shack-Hartmann Wavefront Sensor based on an Industrial Smart Camera, in Proceedings on IEEE Instrumentation and Measurement Technology Conference (I2MTC), 2012, p. 1127–1132.
    [BibTex]
    @InProceedings{TUW-211818,
    Title = {'Shack-Hartmann Wavefront Sensor based on an Industrial Smart Camera},
    Author = {Paris, Ren{\'e} and Thier, Markus and Thurner, Thomas and Schitter, Georg},
    Booktitle = {Proceedings on IEEE Instrumentation and Measurement Technology Conference (I2MTC)},
    Year = {2012},
    Note = {Vortrag: IEEE International Instrumentation and Measurement Technology Conference (2012 I2MTC), Graz; 2012-05-13 -- 2012-05-16},
    Pages = {1127--1132},
    Doi = {10.1109/I2MTC.2012.6229194}
    }
  • M. Steinegger and A. Zoitl, Automated Code Generation for Programmable Logic Controllers based on Knowledge Acquisition from Engineering Artifacts: Concept and Case Study., in Proceedings of the 17th IEEE International Conference on Emerging Technologies and Factory Automation, 2012, pp. 1-8.
    [BibTex]
    @InProceedings{TUW-221320,
    Title = {Automated Code Generation for Programmable Logic Controllers based on Knowledge Acquisition from Engineering Artifacts: Concept and Case Study.},
    Author = {Steinegger, M. and Zoitl, A.},
    Booktitle = {Proceedings of the 17th IEEE International Conference on Emerging Technologies and Factory Automation},
    Year = {2012},
    Pages = {1-8},
    Doi = {10.1109/ETFA.2012.6489546},
    }
  • H. W. Yoo, S. Ito, M. Verhaegen, and G. Schitter, Iterative Learning Control of a Galvanometer Scanner for Fast and Accurate Scanning Laser Microscopy, in Proceedings on Mechartonics 2012, 2012, p. 537–543.
    [BibTex]
    @InProceedings{TUW-211822,
    Title = {Iterative Learning Control of a Galvanometer Scanner for Fast and Accurate Scanning Laser Microscopy},
    Author = {Yoo, Han Woong and Ito, Shingo and Verhaegen, Michel and Schitter, Georg},
    Booktitle = {Proceedings on Mechartonics 2012},
    Year = {2012},
    Note = {Vortrag: Mechatronics 2012, Linz; 2012-09-17 -- 2012-09-29},
    Pages = {537--543},
    ISBN = {978-3-99033-045-6}
    }
  • H. W. Yoo, M. Verhaegen, M. E. von Royen, and G. Schitter, Automated Adjustment of Aberration Correction in Scanning Confocal Microscopy, in Proceedings on IEEE Instrumentation and Measurement Technology Conference (I2MTC), 2012.
    [BibTex]
    @InProceedings{TUW-211819,
    Title = {Automated Adjustment of Aberration Correction in Scanning Confocal Microscopy},
    Author = {Yoo, Han Woong and Verhaegen, Michel and von Royen, Martin E. and Schitter, Georg},
    Booktitle = {Proceedings on IEEE Instrumentation and Measurement Technology Conference (I2MTC)},
    Year = {2012},
    Note = {Vortrag: IEEE International Instrumentation and Measurement Technology Conference (2012 I2MTC), Graz; 2012-05-13 -- 2012-05-16},
    Doi = {10.1109/I2MTC.2012.6229195},
    Numpages = {6}
    }

2011

  • R. Hametner, B. Kormann, B. Vogel-Heuser, D. Winkler, and A. Zoitl, Test Case Generation Approach for Industrial Automation Systems, in Proceedings of the 5th International Conference on Automation, Robotics and Applications, 2011, p. 57–62.
    [BibTex]
    @InProceedings{TUW-201583,
    Title = {Test Case Generation Approach for Industrial Automation Systems},
    Author = {Hametner, Reinhard and Kormann, Benjamin and Vogel-Heuser, Birgit and Winkler, Dietmar and Zoitl, Alois},
    Booktitle = {Proceedings of the 5th International Conference on Automation, Robotics and Applications},
    Year = {2011},
    Note = {Vortrag: 5th International Conference on Automation, Robotics and Applications, New Zealand, Wellington; 2011-12-06 -- 2011-12-08},
    Pages = {57--62},
    Doi = {10.1109/ICARA.2011.6144856},
    ISBN = {978-1-4577-0328-7},
    }
  • B. Kormann, B. Vogel-Heuser, R. Hametner, and A. Zoitl, Engineering Process for an Online Testing Process of Control Software in Production Systems, in Proceedings of the 16th IEEE International Conference on Emerging Technologies and Factory Automation, 2011.
    [BibTex]
    @InProceedings{TUW-200255,
    Title = {Engineering Process for an Online Testing Process of Control Software in Production Systems},
    Author = {Kormann, Benjamin and Vogel-Heuser, Birgit and Hametner, Reinhard and Zoitl, Alois},
    Booktitle = {Proceedings of the 16th IEEE International Conference on Emerging Technologies and Factory Automation},
    Year = {2011},
    Note = {Vortrag: IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), France, Toulouse; 2011-09-05 -- 2011-09-09},
    Doi = {10.1109/ETFA.2011.6059205},
    ISBN = {978-1-4577-0018-7},
    Numpages = {4},
    }
  • S. Kuiper, P. M. J. Van den Hof, and G. Schitter, Integrated Design of the Feedback Controller and Topography Estimator in Atomic Force Microscopy, in Book of Abstracts, 2011.
    [BibTex]
    @InProceedings{TUW-193400,
    Title = {Integrated Design of the Feedback Controller and Topography Estimator in Atomic Force Microscopy},
    Author = {Kuiper, Stefan and Van den Hof, Paul M. J. and Schitter, Georg},
    Booktitle = {Book of Abstracts},
    Year = {2011},
    Note = {Vortrag: 30th Benelux Meeting on Systems and Control, Lommel, Belgium; 2011-03-15 -- 2011-03-17},
    Doi = {10.1016/j.conengprac.2013.03.006}
    }
  • S. Kuiper, P. M. J. Van den Hof, and G. Schitter, Towards Integrated Design of a Robust Feedback Controller and Topography Estimator for Atomic Force Microscopy, in Proceedings of the 18th IFAC World Congress, 2011, 2011.
    [BibTex]
    @InProceedings{TUW-195781,
    Title = {Towards Integrated Design of a Robust Feedback Controller and Topography Estimator for Atomic Force Microscopy},
    Author = {Kuiper, Stefan and Van den Hof, Paul M. J. and Schitter, Georg},
    Booktitle = {Proceedings of the 18th IFAC World Congress, 2011},
    Year = {2011},
    Note = {Vortrag: 18th IFAC World Congress, Milano, Italy; 2011-08-28 -- 2011-09-02},
    Doi = {10.3182/20110828-6-IT-1002.01619},
    ISBN = {978-3-902661-93-7},
    Numpages = {6}
    }
  • W. Leonhardsberger and A. Zoitl, Using EtherNet/IP with IEC 61499 Communication Function Blocks, in 5th International Conference on Industrial Applications of Holonic and Multi-Agent Systems, HoloMAS 2011, Toulouse, France, August 29-31, 2011, Proceedings, Lecture Notes in Computer Science, Vol. 6867, 2011, p. 39–49.
    [BibTex]
    @InProceedings{TUW-200251,
    Title = {Using EtherNet/IP with IEC 61499 Communication Function Blocks},
    Author = {Leonhardsberger, Wilhelm and Zoitl, Alois},
    Booktitle = {5th International Conference on Industrial Applications of Holonic and Multi-Agent Systems, HoloMAS 2011, Toulouse, France, August 29-31, 2011, Proceedings},
    Year = {2011},
    Address = {Lecture Notes in Computer Science, Vol. 6867},
    Note = {Vortrag: 5th International Conference on Industrial Applications of Holonic and Multi-Agent Systems, France, Toulouse; 2011-08-29 -- 2011-08-31},
    Pages = {39--49},
    Publisher = {Springer},
    ISBN = {978-3-642-23180-3},
    Url = {https://link.springer.com/chapter/10.1007/978-3-642-23181-0_4}
    }
  • W. Lepuschitz, A. Zoitl, and M. Merdan, Ontology-Driven Automated Software Configuration for Manufacturing System Components, in Proceedings of the 2011 IEEE International Conference on Systems, Man and Cybernetics, 2011, p. 427–433.
    [BibTex]
    @InProceedings{TUW-201580,
    Title = {Ontology-Driven Automated Software Configuration for Manufacturing System Components},
    Author = {Lepuschitz, Wilfried and Zoitl, Alois and Merdan, Munir},
    Booktitle = {Proceedings of the 2011 IEEE International Conference on Systems, Man and Cybernetics},
    Year = {2011},
    Note = {Vortrag: 2011 IEEE International Conference on Systems, Man and Cybernetics, Anchorage, Alaska, USA; 2011-10-09 -- 2011-10-12},
    Pages = {427--433},
    Doi = {10.1109/ICSMC.2011.6083703},
    ISBN = {9781457706516},
    }
  • T. Moser, R. Mordinyi, D. Winkler, M. Melik-Merkumians, and S. Biffl, Efficient Automation Systems Engineering Process Support Based on Semantic Integration of Engineering Knowledge, in Proceeding of 16th IEEE International Conference on Emerging Technologies and Factory Automation, 2011.
    [BibTex]
    @InProceedings{TUW-0310201710,
    Title = {Efficient Automation Systems Engineering Process Support Based on Semantic Integration of Engineering Knowledge},
    Author = {Moser, T. and Mordinyi, R. and Winkler, D. and Melik-Merkumians, M. and Biffl, S.},
    Booktitle = {Proceeding of 16th IEEE International Conference on Emerging Technologies and Factory Automation},
    Year = {2011},
    }
  • A. Schimmel and A. Zoitl, Distributed Online Change for IEC 61499, in Proceedings of the 16th IEEE International Conference on Emerging Technologies and Factory Automation, 2011.
    [BibTex]
    @InProceedings{TUW-200254,
    Title = {Distributed Online Change for IEC 61499},
    Author = {Schimmel, Andreas and Zoitl, Alois},
    Booktitle = {Proceedings of the 16th IEEE International Conference on Emerging Technologies and Factory Automation},
    Year = {2011},
    Note = {Vortrag: IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), France, Toulouse; 2011-09-05 -- 2011-09-09},
    Doi = {10.1109/ETFA.2011.6059117},
    ISBN = {978-1-4577-0018-7},
    Numpages = {7},
    }
  • W. Sunindyo, M. Melik-Merkumians, T. Moser, and S. Biffl, Enforcing Safety Requirements for Industrial Automation System at Runtime – Position Paper, in “Proceedings of 2nd International Workshop on Requirements@Run.Time (RE@RunTime 2011), 2011.
    [BibTex]
    @InProceedings{TUW-031020179,
    Title = {Enforcing Safety Requirements for Industrial Automation System at Runtime - Position Paper},
    Author = {Sunindyo, W. and Melik-Merkumians, M. and Moser, T. and Biffl, S.},
    Booktitle = {"Proceedings of 2nd International Workshop on Requirements@Run.Time (RE@RunTime 2011)},
    Year = {2011},
    Doi = {10.1109/ReRunTime.2011.6046246},
    }
  • M. Wenger, M. Melik-Merkumians, I. Hegny, R. Hametner, and A. Zoitl, Utilizing IEC 61499 in an MDA Control Application Development Approach, in 2011 IEEE Conference on Automation, Science and Engineering, August 24-27,2011, Trieste, Italy, Proceedings, 2011, pp. 495-500.
    [BibTex]
    @InProceedings{TUW-0310201711,
    Title = {Utilizing IEC 61499 in an MDA Control Application Development Approach},
    Author = {Wenger, M. and Melik-Merkumians, M. and Hegny, I. and Hametner, R. and Zoitl, A.},
    Booktitle = {2011 IEEE Conference on Automation, Science and Engineering, August 24-27,2011, Trieste, Italy, Proceedings},
    Year = {2011},
    Pages = {495-500},
    Doi = {10.1109/CASE.2011.6042458},
    }
  • A. Zoitl and H. Prähofer, Building Hierarchical Automation Solutions in the IEC 61499 Modeling Language, in USB Proceedings INDIN 2011 2011 9th IEEE International Conference on Industrial Informatics, 2011, p. 557–564.
    [BibTex]
    @InProceedings{TUW-198746,
    Title = {Building Hierarchical Automation Solutions in the IEC 61499 Modeling Language},
    Author = {Zoitl, Alois and Pr{\"a}hofer, Herbert},
    Booktitle = {USB Proceedings INDIN 2011 2011 9th IEEE International Conference on Industrial Informatics},
    Year = {2011},
    Organization = {Ieee Ies},
    Pages = {557--564},
    Publisher = {IEEE Industrial Electronics Society},
    Doi = {10.1109/INDIN.2011.6034940},
    ISBN = {978-1-4577-0433-8},
    }

2010

  • R. Froschauer, A. Zoitl, and M. Rooker, FRONTICS – A Communication Framework for Networked Automation and Control Systems, in Preprints 10th IFAC Workshop on Intelligent Manufacturing Systems (IMS’10), 2010.
    [BibTex]
    @InProceedings{TUW-187177,
    Title = {FRONTICS - A Communication Framework for Networked Automation and Control Systems},
    Author = {Froschauer, Roman and Zoitl, Alois and Rooker, Martijn},
    Booktitle = {Preprints 10th IFAC Workshop on Intelligent Manufacturing Systems (IMS'10)},
    Year = {2010},
    Publisher = {Faculdade de Ciencias e Technologia, Universidade Nova de Lisboa},
    Numpages = {6},
    }
  • R. Hametner, D. Winkler, T. Östreicher, S. Biffl, and A. Zoitl, The Adaption of Test-Driven Software Processes to Industrial Automation Engineering, in Proceedings INDIN 2010 – 8th IEEE International Conference on Industrial Informatics, 2010.
    [BibTex]
    @InProceedings{TUW-187931,
    Title = {The Adaption of Test-Driven Software Processes to Industrial Automation Engineering},
    Author = {Hametner, Reinhard and Winkler, Dietmar and {\"O}streicher, Thomas and Biffl, Stefan and Zoitl, Alois},
    Booktitle = {Proceedings INDIN 2010 - 8th IEEE International Conference on Industrial Informatics},
    Year = {2010},
    Note = {Vortrag: IEEE International Conference on Industrial Informatics (INDIN), Osaka, Japan; 2010-07-13 -- 2010-07-16},
    Doi = {10.1109/INDIN.2010.5549620},
    ISBN = {978-1-4244-7299-4},
    Numpages = {7},
    }
  • R. Hametner, A. Zoitl, and M. Semo, Automation Component Architecture for the Efficient Development of Industrial Automation Systems, in 6th annual IEEE Conference on Automation Science and Engineering (IEEE CASE 2010), 2010.
    [BibTex]
    @InProceedings{TUW-187525,
    Title = {Automation Component Architecture for the Efficient Development of Industrial Automation Systems},
    Author = {Hametner, Reinhard and Zoitl, Alois and Semo, Mario},
    Booktitle = {6th annual IEEE Conference on Automation Science and Engineering (IEEE CASE 2010)},
    Year = {2010},
    Note = {Vortrag: 6th International Conference on Automation Science and Engineering (IEEE CASE 2010), Toronto, Canada; 2010-08-21 -- 2010-08-24},
    Publisher = {IEEE},
    Doi = {10.1109/COASE.2010.5584013},
    ISBN = {978-1-4244-5448-8},
    Numpages = {6},
    }
  • I. Hegny, M. Wenger, and A. Zoitl, IEC 61499 based Simulation Framework for Model-Driven Production Systems Development, in Proceedings IEEE Emerging Technologies and Factory Automation (ETFA 2010), 2010.
    [BibTex]
    @InProceedings{TUW-187945,
    Title = {IEC 61499 based Simulation Framework for Model-Driven Production Systems Development},
    Author = {Hegny, Ingo and Wenger, Monika and Zoitl, Alois},
    Booktitle = {Proceedings IEEE Emerging Technologies and Factory Automation (ETFA 2010)},
    Year = {2010},
    Note = {Vortrag: IEEE International Conference on Emerging Technologies and Factory Automation, Bilbao, Spain; 2010-09-13 -- 2010-09-16},
    Doi = {10.1109/ETFA.2010.5641364},
    ISBN = {978-1-4244-6849-2},
    Numpages = {8},
    }
  • I. Hegny and A. Zoitl, Component-based Simulation Framework for Production Systems, in USB Proceedings ICIT 2010, 2010.
    [BibTex]
    @InProceedings{TUW-187161,
    Title = {Component-based Simulation Framework for Production Systems},
    Author = {Hegny, Ingo and Zoitl, Alois},
    Booktitle = {USB Proceedings ICIT 2010},
    Year = {2010},
    Note = {Vortrag: IEEE-ICIT 2010 International Conference on Industrial Technology, Vina del Mar, Chile; 2010-03-14 -- 2010-03-17},
    Doi = {10.1109/ICIT.2010.5472554},
    ISBN = {978-1-4244-5697-0},
    Numpages = {6},
    }
  • J. R. van Hulzen, G. Schitter, J. van Eijk, and P. M. J. Van den Hof, Modal actuation for high-bandwidth nano-positioning, in 2010 American Control Conference, 2010, p. 6525–6530.
    [BibTex]
    @InProceedings{TUW-269268,
    Title = {Modal actuation for high-bandwidth nano-positioning},
    Author = {van Hulzen, Jan R. and Schitter, Georg and van Eijk, Jan and Van den Hof, Paul M. J.},
    Booktitle = {2010 American Control Conference},
    Year = {2010},
    Note = {talk: 2010 American Control Conference, Baltimore (USA); 2010-06-30 -- 2010-07-02},
    Pages = {6525--6530},
    }
  • J. R. van Hulzen, G. Schitter, J. van Eijk, and P. M. J. Van den Hof, Modal actuation for high-bandwidth nano-positioning, in Proceedings of the 10th International Conference of the European Society of Precision Engineering and Nanotechnology (EUSPEN), 2010, p. 478–481.
    [BibTex]
    @InProceedings{TUW-269298,
    Title = {Modal actuation for high-bandwidth nano-positioning},
    Author = {van Hulzen, Jan R. and Schitter, Georg and van Eijk, Jan and Van den Hof, Paul M. J.},
    Booktitle = {Proceedings of the 10th International Conference of the European Society of Precision Engineering and Nanotechnology (EUSPEN)},
    Year = {2010},
    Note = {talk: 10th International Conference of the European Society of Precision Engineering and Nanotechnology (EUSPEN), Delft, the Netherlands; 2010-05-31 -- 2010-06-04},
    Pages = {478--481},
    }
  • J. R. van Hulzen, G. Schitter, P. M. J. Van den Hof, and J. van Eijk, Dynamics and Modal Control of Piezoelectric Tube Actuators, in Proceedings of the 5th IFAC Symposium on Mechatronic Systems, 2010, p. 317–323.
    [BibTex]
    @InProceedings{TUW-190876,
    Title = {Dynamics and Modal Control of Piezoelectric Tube Actuators},
    Author = {van Hulzen, Jan R. and Schitter, Georg and Van den Hof, Paul M. J. and van Eijk, Jan},
    Booktitle = {Proceedings of the 5th IFAC Symposium on Mechatronic Systems},
    Year = {2010},
    Note = {Vortrag: 5th IFAC Symposium on Mechatronic Systems, Boston, USA; 2010-09-13 -- 2010-09-15},
    Pages = {317--323},
    Doi = {10.3182/20100913-3-US-2015.00086},
    Keywords = {Modal control, Mode analysis, Mechanical properties, Finite element analysis, Model based control, Microscopes}
    }
  • S. Kuiper, A. J. Fleming, and G. Schitter, Dual Actuation for High Speed Atomic Force Microscopy, in Proceedings of the 5th IFAC Symposium on Mechatronic Systems, 2010, p. 220–226.
    [BibTex]
    @InProceedings{TUW-190896,
    Title = {Dual Actuation for High Speed Atomic Force Microscopy},
    Author = {Kuiper, Stefan and Fleming, Andrew J. and Schitter, Georg},
    Booktitle = {Proceedings of the 5th IFAC Symposium on Mechatronic Systems},
    Year = {2010},
    Note = {Vortrag: 5th IFAC Symposium on Mechatronic Systems, Boston, USA; 2010-09-13 -- 2010-09-15},
    Pages = {220--226},
    Doi = {10.3182/20100913-3-US-2015.00105},
    Keywords = {Atomic Force Microscopy, model-based control, piezoelectric actuator, dual actuation.}
    }
  • S. Kuiper and G. Schitter, Dual actuated nano-positioning for high speed Atomic Force Microscopy, in Proceedings of the 10th International Conference of the European Society of Precision Engineering and Nanotechnology (EUSPEN), 2010, p. 225–228.
    [BibTex]
    @InProceedings{TUW-269299,
    Title = {Dual actuated nano-positioning for high speed Atomic Force Microscopy},
    Author = {Kuiper, Stefan and Schitter, Georg},
    Booktitle = {Proceedings of the 10th International Conference of the European Society of Precision Engineering and Nanotechnology (EUSPEN)},
    Year = {2010},
    Note = {talk: 10th International Conference of the European Society of Precision Engineering and Nanotechnology (EUSPEN), Delft, the Netherlands; 2010-05-31 -- 2010-06-04},
    Pages = {225--228},
    }
  • W. Lepuschitz, M. Vallee, A. Zoitl, and M. Merdan, Online Reconfiguration of the Low Level Control for Automation Agents, in CDROM Proceedings IECON 2010 36th Annual Conference of the IEEE Industrial Electronics Society, 2010, p. 1359–1364.
    [BibTex]
    @InProceedings{TUW-190626,
    Title = {Online Reconfiguration of the Low Level Control for Automation Agents},
    Author = {Lepuschitz, Wilfried and Vallee, Mathieu and Zoitl, Alois and Merdan, Munir},
    Booktitle = {CDROM Proceedings IECON 2010 36th Annual Conference of the IEEE Industrial Electronics Society},
    Year = {2010},
    Note = {Vortrag: IEEE Internatonal Conference on Industrial Control and Instrumentation (IECON), Glendale, AZ, USA; 2010-11-07 -- 2010-11-10},
    Pages = {1359--1364},
    Doi = {10.1109/IECON.2010.5675483},
    ISBN = {978-1-4244-5226-2},
    }
  • M. Melik-Merkumians, T. Moser, A. Schatten, A. Zoitl, and S. Biffl, Knowledge-based Runtime Failure Detection for Industrial Automation Systems, in Proceedings of the 5th Workshop on Models@run.time at the ACM/IEEE 13th International Conference on Model Driven Engineering Languages and Systems, 2010.
    [BibTex]
    @InProceedings{TUW-0310201712,
    Title = {Knowledge-based Runtime Failure Detection for Industrial Automation Systems},
    Author = {Melik-Merkumians, M. and Moser, T. and Schatten, A. and Zoitl, A. and Biffl, S.},
    Booktitle = {Proceedings of the 5th Workshop on Models@run.time at the ACM/IEEE 13th International Conference on Model Driven Engineering Languages and Systems},
    Year = {2010},
    }
  • M. Melik-Merkumians, M. Wenger, R. Hametner, and Zoi, Increasing Portability and Reuseability of Distributed Control Programs by I/0 Access Abstraction, in Proceedings IEEE Emerging Technologies and Factory Automation (ETFA 2010), 2010.
    [BibTex]
    @InProceedings{TUW-0310201713,
    Title = {Increasing Portability and Reuseability of Distributed Control Programs by I/0 Access Abstraction},
    Author = {Melik-Merkumians, M. and Wenger, M. and Hametner, R. and Zoi},
    Booktitle = {Proceedings IEEE Emerging Technologies and Factory Automation (ETFA 2010)},
    Year = {2010},
    }
  • M. Melik-Merkumians, A. Zoitl, and oser, Ontology-based Fault Diagnosis for Industrial Control Applications, in Proceedings IEEE Emerging Technologies and Factory Automation (ETFA 2010), 2010.
    [BibTex]
    @InProceedings{TUW-0310201714,
    Title = {Ontology-based Fault Diagnosis for Industrial Control Applications},
    Author = {Melik-Merkumians, M. and Zoitl, A. and oser},
    Booktitle = {Proceedings IEEE Emerging Technologies and Factory Automation (ETFA 2010)},
    Year = {2010},
    Doi = {10.1109/ETFA.2010.5641192},
    }
  • C. Oates and A. Zoitl, Utilizing Lego Mindstorms as a Teaching Platform for Industrial Automation, in Proceedings of the 1st International Conference Robotics in Education, 2010.
    [BibTex]
    @InProceedings{TUW-189241,
    Title = {Utilizing Lego Mindstorms as a Teaching Platform for Industrial Automation},
    Author = {Oates, Carolyn and Zoitl, Alois},
    Booktitle = {Proceedings of the 1st International Conference Robotics in Education},
    Year = {2010},
    Note = {Vortrag: 1st International Conference Robotics in Education, Brastislava, Slovakia; 2010-09-16 -- 2010-09-17},
    Numpages = {6},
    }
  • A. Schimmel and A. Zoitl, Real-Time Communication for IEC 61499 in Switched Ethernet Networks, in Proceedings of ICUMT-T, ICUMT-CS and associated workshops, 2010.
    [BibTex]
    @InProceedings{TUW-190981,
    Title = {Real-Time Communication for IEC 61499 in Switched Ethernet Networks},
    Author = {Schimmel, Andreas and Zoitl, Alois},
    Booktitle = {Proceedings of ICUMT-T, ICUMT-CS and associated workshops},
    Year = {2010},
    Note = {Vortrag: 2010 International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT), Moscow, Russia; 2010-10-18 -- 2010-10-20},
    Doi = {10.1109/ICUMT.2010.5676605},
    ISBN = {978-1-4244-7284-0},
    Numpages = {6},
    }
  • A. Schimmel, A. Zoitl, R. Froschauer, M. Rooker, and G. Ebenhofer, Model-Driven Communication Routing in Industrial Automation and Control Systems, in Proceedings INDIN 2010 – 8th IEEE International Conference on Industrial Informatics, 2010.
    [BibTex]
    @InProceedings{TUW-187156,
    Title = {Model-Driven Communication Routing in Industrial Automation and Control Systems},
    Author = {Schimmel, Andreas and Zoitl, Alois and Froschauer, Roman and Rooker, Martijn and Ebenhofer, Gerhard},
    Booktitle = {Proceedings INDIN 2010 - 8th IEEE International Conference on Industrial Informatics},
    Year = {2010},
    Publisher = {IEEE Conference Proceedings},
    Doi = {10.1109/INDIN.2010.5549624},
    ISBN = {978-1-4244-7299-4},
    Numpages = {6},
    }
  • H. Song, R. Fraanje, G. Schitter, G. Vdovin, and M. Verhaegen, Modeling and Control of a Nonlinear Dynamic Adaptive Optics System, in Proceedings of the 5th IFAC Symposium on Mechatronic Systems, 2010, p. 299–305.
    [BibTex]
    @InProceedings{TUW-190863,
    Title = {Modeling and Control of a Nonlinear Dynamic Adaptive Optics System},
    Author = {Song, Hong and Fraanje, Rufus and Schitter, Georg and Vdovin, Gleb and Verhaegen, Michel},
    Booktitle = {Proceedings of the 5th IFAC Symposium on Mechatronic Systems},
    Year = {2010},
    Note = {Vortrag: 5th IFAC Symposium on Mechatronic Systems, Boston, USA; 2010-09-13 -- 2010-09-15},
    Pages = {299--305},
    Doi = {10.1109/IJCNN.1991.155682},
    Keywords = {adaptive optics, hysteresis compensation, closed-loop subspace identification, model-based controller design.}
    }
  • T. Strasser, A. Zoitl, and G. Ebenhofer, 4DIAC – Ein Open Source Framework für verteilte industrielle Automatisierungs- und Steuerungssysteme, in Proceedings Informatik 2010 Service Science Band 1, 2010.
    [BibTex]
    @InProceedings{TUW-189204,
    Title = {4DIAC - Ein Open Source Framework f{\"u}r verteilte industrielle Automatisierungs- und Steuerungssysteme},
    Author = {Strasser, Thomas and Zoitl, Alois and Ebenhofer, Gerhard},
    Booktitle = {Proceedings Informatik 2010 Service Science Band 1},
    Year = {2010},
    Note = {Vortrag: Informatik 2010, Leipzig, Deutschland; 2010-09-27 -- 2010-10-01},
    ISBN = {978-3-88579-269-7},
    Numpages = {12},
    }
  • A. Zoitl, W. Lepuschitz, M. Merdan, and M. Vallee, A Real-Time Reconfiguration Infrastructure for Distributed Embedded Control Systems, in Proceedings IEEE Emerging Technologies and Factory Automation (ETFA 2010), 2010.
    [BibTex]
    @InProceedings{TUW-187946,
    Title = {A Real-Time Reconfiguration Infrastructure for Distributed Embedded Control Systems},
    Author = {Zoitl, Alois and Lepuschitz, Wilfried and Merdan, Munir and Vallee, Mathieu},
    Booktitle = {Proceedings IEEE Emerging Technologies and Factory Automation (ETFA 2010)},
    Year = {2010},
    Note = {Vortrag: IEEE International Conference on Emerging Technologies and Factory Automation, Bilbao, Spain; 2010-09-13 -- 2010-09-16},
    Doi = {10.1109/ETFA.2010.5641259},
    ISBN = {978-1-4244-6849-2},
    Numpages = {8},
    }
  • A. Zoitl, T. Strasser, and A. Valentini, Open Source Initiatives as basis for the Establishment of new Technologies in Industrial Automation: 4DIAC a Case Study, in Proceedings of the 2010 IEEE International Symposium on Industrial Electronics, 2010.
    [BibTex]
    @InProceedings{TUW-187208,
    Title = {Open Source Initiatives as basis for the Establishment of new Technologies in Industrial Automation: 4DIAC a Case Study},
    Author = {Zoitl, Alois and Strasser, Thomas and Valentini, Antonio},
    Booktitle = {Proceedings of the 2010 IEEE International Symposium on Industrial Electronics},
    Year = {2010},
    Note = {Vortrag: IEEE International Symposium on Industrial Electronics (ISIE 2010), Bari, Italy; 2010-07-04 -- 2010-07-07},
    Publisher = {2010 IEEE},
    ISBN = {978-1-4244-6391-6},
    Numpages = {3},
    Url = {http://www.isie2010.it/sites/www.isie2010.it/files/call-for-papers-web-032010.pdf}
    }

2009

  • S. Biffl, A. Schatten, and A. Zoitl, Integration of Heterogeneous Engineering Environments for the Automation Systems Lifecycle, in INDIN 2009 7th International Conference on Industrial Informatics, 2009.
    [BibTex]
    @InProceedings{TUW-176666,
    Title = {Integration of Heterogeneous Engineering Environments for the Automation Systems Lifecycle},
    Author = {Biffl, Stefan and Schatten, Alexander and Zoitl, Alois},
    Booktitle = {INDIN 2009 7th International Conference on Industrial Informatics},
    Year = {2009},
    Note = {Vortrag: IEEE International Conference on Industrial Informatics (INDIN), Cardiff, UK; 2009-06-24 -- 2009-06-26},
    Publisher = {IEEE},
    ISBN = {978-1-4244-3760-3},
    Numpages = {6},
    }
  • R. Froschauer, F. Auinger, A. Schimmel, and A. Zoitl, Engineering of Communication Links with AADL in IEC 61499 Automation and Control Systems, in INDIN 2009 7th International Conference on Industrial Informatics, 2009.
    [BibTex]
    @InProceedings{TUW-176665,
    Title = {Engineering of Communication Links with AADL in IEC 61499 Automation and Control Systems},
    Author = {Froschauer, Roman and Auinger, Franz and Schimmel, Andreas and Zoitl, Alois},
    Booktitle = {INDIN 2009 7th International Conference on Industrial Informatics},
    Year = {2009},
    Note = {Vortrag: IEEE International Conference on Industrial Informatics (INDIN), Cardiff, UK; 2009-06-24 -- 2009-06-26},
    Publisher = {IEEE},
    Doi = {Date Added to IEEE Xplore: 07 August 2009
    ISBN Information:
    ISSN Information:
    INSPEC Accession Number: 10813648
    DOI: 10.1109/INDIN.2009.5195868},
    ISBN = {978-1-4244-3760-3},
    Numpages = {6},
    }
  • R. Froschauer, A. Zoitl, and P. Grünbacher, Development and Adaptation of IEC 61499 Automation and Control Applications with Runtime Variability Models, in INDIN 2009 7th International Conference on Industrial Informatics, 2009.
    [BibTex]
    @InProceedings{TUW-176663,
    Title = {Development and Adaptation of IEC 61499 Automation and Control Applications with Runtime Variability Models},
    Author = {Froschauer, Roman and Zoitl, Alois and Gr{\"u}nbacher, Paul},
    Booktitle = {INDIN 2009 7th International Conference on Industrial Informatics},
    Year = {2009},
    Note = {Vortrag: IEEE International Conference on Industrial Informatics (INDIN), Cardiff, UK; 2009-06-24 -- 2009-06-26},
    Publisher = {IEEE},
    Doi = {10.1109/INDIN.2009.5195923},
    ISBN = {978-1-4244-3760-3},
    Numpages = {6},
    }
  • I. Hegny, A. Zoitl, and W. Lepuschitz, Integration of simulation in the development process of distributed IEC 61499 control applications, in Proceedings 2009 IEEE International Conference on Industrial Technology, 2009.
    [BibTex]
    @InProceedings{TUW-175316,
    Title = {Integration of simulation in the development process of distributed IEC 61499 control applications},
    Author = {Hegny, Ingo and Zoitl, Alois and Lepuschitz, Wilfried},
    Booktitle = {Proceedings 2009 IEEE International Conference on Industrial Technology},
    Year = {2009},
    Note = {Vortrag: IEEE International Conference on Industrial Technology, Gippsland, Australia; 2009-02-10 -- 2009-02-13},
    Doi = {10.1109/ICIT.2009.4939681},
    ISBN = {978-1-4244-3507-4},
    Numpages = {6},
    }
  • J. R. van Hulzen, G. Schitter, J. van Eijk, and P. M. J. Van den Hof, Load balancing in piezoelectric actuation, in Proceedings of the 2009 European Control Conference, 2009, p. 5009–5014.
    [BibTex]
    @InProceedings{TUW-269303,
    Title = {Load balancing in piezoelectric actuation},
    Author = {van Hulzen, Jan R. and Schitter, Georg and van Eijk, Jan and Van den Hof, Paul M. J.},
    Booktitle = {Proceedings of the 2009 European Control Conference},
    Year = {2009},
    Note = {talk: 2009 European Control Conference, Budapest (Hungary); 2009-06-23 -- 2009-06-26},
    Pages = {5009--5014},
    }
  • H. Krapfenbauer, D. Ertl, A. Zoitl, and F. Kupzog, Improving Component Testing of Industrial Automation Software, in Proceedings of the Fourth International Multi-Conference on Computing in the Global Information Technology (ICCGI 2009), 2009.
    [BibTex]
    @InProceedings{TUW-177470,
    Title = {Improving Component Testing of Industrial Automation Software},
    Author = {Krapfenbauer, Harald and Ertl, Dominik and Zoitl, Alois and Kupzog, Friederich},
    Booktitle = {Proceedings of the Fourth International Multi-Conference on Computing in the Global Information Technology (ICCGI 2009)},
    Year = {2009},
    Note = {Vortrag: The Fourth International Multi-Conference on Computing in the Global Information Technology ICCGI 2009, Cannes/La Bocca, France; 2009-08-23 -- 2009-08-29},
    Doi = {10.1109/ICCGI.2009.46},
    Numpages = {4},
    }
  • S. Kuiper and G. Schitter, MIMO self sensing control of a piezoelectric tube scanner, in Proceedings of the ASME 2009 Dynamic Systems and Control Conference, 2009, p. 1–7.
    [BibTex]
    @InProceedings{TUW-269270,
    Title = {MIMO self sensing control of a piezoelectric tube scanner},
    Author = {Kuiper, Stefan and Schitter, Georg},
    Booktitle = {Proceedings of the ASME 2009 Dynamic Systems and Control Conference},
    Year = {2009},
    Note = {talk: ASME 2009 Dynamic Systems and Control Conference, Hollywood (USA); 2009-10-12 -- 2009-10-14},
    Pages = {1--7},
    }
  • S. Kuiper and G. Schitter, Self sensing piezoelectric actuation for dynamic nanopositioning, in Proceedings of the 2009 European Control Conference, 2009, p. 3887–3892.
    [BibTex]
    @InProceedings{TUW-269302,
    Title = {Self sensing piezoelectric actuation for dynamic nanopositioning},
    Author = {Kuiper, Stefan and Schitter, Georg},
    Booktitle = {Proceedings of the 2009 European Control Conference},
    Year = {2009},
    Note = {talk: 2009 European Control Conference, Budapest (Hungary); 2009-06-23 -- 2009-06-26},
    Pages = {3887--3892},
    }
  • W. Lepuschitz, F. Königseder, and A. Zoitl, Conjunction of a Distributed Control System based on IEC 61499 with a Commercial Batch Management System, in 2009 IEEE Conference on Emerging Technologies & Factory Automation, 2009.
    [BibTex]
    @InProceedings{TUW-177616,
    Title = {Conjunction of a Distributed Control System based on IEC 61499 with a Commercial Batch Management System},
    Author = {Lepuschitz, Wilfried and K{\"o}nigseder, Franz and Zoitl, Alois},
    Booktitle = {2009 IEEE Conference on Emerging Technologies {\&} Factory Automation},
    Year = {2009},
    Note = {Vortrag: IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Mallorca; 2009-09-22 -- 2009-09-26},
    Doi = {10.1109/ETFA.2009.5347148},
    Numpages = {8},
    }
  • W. Lepuschitz and A. Zoitl, Integration of a Distributed Control System based on IEC 61499 with Industrial Batch Management Systems, in Preprints of the 13th IFAC Symposium on Information Control Problems in Manufacturing, 2009.
    [BibTex]
    @InProceedings{TUW-175736,
    Title = {Integration of a Distributed Control System based on IEC 61499 with Industrial Batch Management Systems},
    Author = {Lepuschitz, Wilfried and Zoitl, Alois},
    Booktitle = {Preprints of the 13th IFAC Symposium on Information Control Problems in Manufacturing},
    Year = {2009},
    Note = {Vortrag: 13th IFAC Symposium on Information Control Problems in Manufacturing, Moscow, Russia; 2009-06-03 -- 2009-06-05},
    Numpages = {6},
    Url = {http://www.sciencedirect.com/science/article/pii/S1474667016338745}
    }
  • M. Rooker, T. Strasser, A. Pichler, G. Stübl, A. Zoitl, and I. Terzic, Adaptive and Reconfigurable Control Framework for the Responsive Factory, in INDIN 2009 7th International Conference on Industrial Informatics, 2009.
    [BibTex]
    @InProceedings{TUW-176662,
    Title = {Adaptive and Reconfigurable Control Framework for the Responsive Factory},
    Author = {Rooker, Martijn and Strasser, Thomas and Pichler, A. and St{\"u}bl, G. and Zoitl, Alois and Terzic, Ivanka},
    Booktitle = {INDIN 2009 7th International Conference on Industrial Informatics},
    Year = {2009},
    Note = {Vortrag: IEEE International Conference on Industrial Informatics (INDIN), Cardiff, UK; 2009-06-24 -- 2009-06-26},
    Publisher = {IEEE},
    Doi = {10.1109/INDIN.2009.5195910},
    ISBN = {978-1-4244-3760-3},
    Numpages = {6},
    }
  • A. Schmets, N. Kringos, A. Scarpas, C. P. Duif, and G. Schitter, First-principles investigation of the multiple phases in bituminous materials: the case of asphaltene stacking, in Proceedings of Advanced testing and characterization of bituminous materials, 2009, p. 143–150.
    [BibTex]
    @InProceedings{TUW-269301,
    Title = {First-principles investigation of the multiple phases in bituminous materials: the case of asphaltene stacking},
    Author = {Schmets, Alexander and Kringos, N. and Scarpas, Athanasios and Duif, Chris P. and Schitter, Georg},
    Booktitle = {Proceedings of Advanced testing and characterization of bituminous materials},
    Year = {2009},
    Note = {talk: Advanced testing and characterization of bituminous materials, London (UK); 2009-00-00},
    Pages = {143--150},
    }
  • T. Strasser, M. Rooker, I. Hegny, M. Wenger, A. Zoitl, L. Ferrarini, A. Dede, and M. Colla, A Research Roadmap for Model-Driven Design of Embedded Systems for Automation Components, in INDIN 2009 7th International Conference on Industrial Informatics, 2009.
    [BibTex]
    @InProceedings{TUW-176729,
    Title = {A Research Roadmap for Model-Driven Design of Embedded Systems for Automation Components},
    Author = {Strasser, Thomas and Rooker, Martijn and Hegny, Ingo and Wenger, Monika and Zoitl, Alois and Ferrarini, Luca and Dede, A. and Colla, Marco},
    Booktitle = {INDIN 2009 7th International Conference on Industrial Informatics},
    Year = {2009},
    Note = {Vortrag: IEEE International Conference on Industrial Informatics (INDIN), Cardiff, UK; 2009-06-24 -- 2009-06-26},
    Doi = {10.1109/INDIN.2009.5195865},
    ISBN = {978-1-4244-3760-3},
    Numpages = {6},
    }
  • P. J. Thurner, R. Müller, J. H. Kindt, G. Schitter, G. E. Fantner, P. Wyss, U. Senhauser, and P. K. Hansma, Hysteresis Compensation in Wavefront-sensor-less Adaptive Optics Systems, in 7th Workshop on Adaptive Optics for Industry and Medicine, 2009.
    [BibTex]
    @Conference{TUW-269300,
    Title = {Hysteresis Compensation in Wavefront-sensor-less Adaptive Optics Systems},
    Author = {Thurner, Philipp J. and M{\"u}ller, Ralph and Kindt, J. H. and Schitter, Georg and Fantner, G. E. and Wyss, Peter and Senhauser, Urs and Hansma, Paul K.},
    Booktitle = {7th Workshop on Adaptive Optics for Industry and Medicine},
    Year = {2009},
    }
  • A. Zoitl, I. Hegny, and A. Schimmel, Utilizing Binary XML Respresentations for Improving the Performance of the IEC 61499 Configuration Interface, in INDIN 2009 7th International Conference on Industrial Informatics, 2009.
    [BibTex]
    @InProceedings{TUW-176668,
    Title = {Utilizing Binary XML Respresentations for Improving the Performance of the IEC 61499 Configuration Interface},
    Author = {Zoitl, Alois and Hegny, Ingo and Schimmel, Andreas},
    Booktitle = {INDIN 2009 7th International Conference on Industrial Informatics},
    Year = {2009},
    Note = {Vortrag: IEEE International Conference on Industrial Informatics (INDIN), Cardiff, UK; 2009-06-24 -- 2009-06-26},
    Publisher = {IEEE},
    Doi = {10.1109/INDIN.2009.5195780},
    ISBN = {978-1-4244-3760-3},
    Numpages = {6},
    }

2008

  • I. Hegny, O. Hummer-Koppendorfer, A. Zoitl, G. Koppensteiner, and M. Merdan, Integrating Software Agents and IEC 61499 Realtime Control for Reconfigurable Distributed Manufacturing Systems, in Proceedings IEEE Third Symposium on Industrial Embedded Systems SIES’2008, 2008.
    [BibTex]
    @InProceedings{TUW-112803,
    Title = {Integrating Software Agents and IEC 61499 Realtime Control for Reconfigurable Distributed Manufacturing Systems},
    Author = {Hegny, Ingo and Hummer-Koppendorfer, Oliver and Zoitl, Alois and Koppensteiner, Gottfried and Merdan, Munir},
    Booktitle = {Proceedings IEEE Third Symposium on Industrial Embedded Systems SIES'2008},
    Year = {2008},
    Note = {Vortrag: IEEE 3rd International Symposium on Industrial Embedded Systems - SIES 2008, Frankreich; 2008-06-11 -- 2008-06-13},
    Doi = {10.1109/SIES.2008.4577710},
    ISBN = {978-1-4244-1995-1},
    Numpages = {4},
    }
  • G. Koppensteiner, M. Merdan, I. Hegny, and G. Weidenhausen, A Change-Direction-Algorithm for distrubuted Multi-Agent Transport Systems, in Proceedings of 2008 IEEE International Conference on Mechatronics and Automation, 2008.
    [BibTex]
    @InProceedings{TUW-166363,
    Title = {A Change-Direction-Algorithm for distrubuted Multi-Agent Transport Systems},
    Author = {Koppensteiner, Gottfried and Merdan, Munir and Hegny, Ingo and Weidenhausen, Gabriel},
    Booktitle = {Proceedings of 2008 IEEE International Conference on Mechatronics and Automation},
    Year = {2008},
    Note = {Vortrag: IEEE International Conference on Mechatronics and Automation (ICMA), Takamatsu, Kagawa, Japan; 2008-08-05 -- 2008-08-08},
    Doi = {10.1109/ICMA.2008.4798900},
    ISBN = {978-1-4244-2632-4},
    }
  • G. Koppensteiner, M. Merdan, A. Zoitl, and B. Favre-Bulle, Ontology-based Resource Allocation in Distributed Systems using Director Facilitator Agents, in Proceedings 2008 IEEE International Symposium on Industrial Electronics, 2008.
    [BibTex]
    @InProceedings{TUW-165520,
    Title = {Ontology-based Resource Allocation in Distributed Systems using Director Facilitator Agents},
    Author = {Koppensteiner, Gottfried and Merdan, Munir and Zoitl, Alois and Favre-Bulle, Bernard},
    Booktitle = {Proceedings 2008 IEEE International Symposium on Industrial Electronics},
    Year = {2008},
    Note = {Vortrag: IEEE International Symposium on Industrial Electronics, Cambridge, United Kingdom; 2008-06-30 -- 2008-07-02},
    Doi = {10.1109/ISIE.2008.4677155},
    ISBN = {978-1-4244-1666-0},
    Numpages = {6},
    }
  • W. Lepuschitz and A. Zoitl, An Engineering Method for Batch Process Automation using a Component Oriented Design based on IEC 61499, in Proceedings IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2008.
    [BibTex]
    @InProceedings{TUW-166817,
    Title = {An Engineering Method for Batch Process Automation using a Component Oriented Design based on IEC 61499},
    Author = {Lepuschitz, Wilfried and Zoitl, Alois},
    Booktitle = {Proceedings IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)},
    Year = {2008},
    Note = {Vortrag: IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Hamburg, Deutschland; 2008-09-15 -- 2008-09-18},
    Doi = {10.1109/ETFA.2008.4638394},
    ISBN = {1-4244-1506-3},
    Numpages = {8},
    }
  • M. Merdan, G. Koppensteiner, A. Zoitl, and I. Hegny, Intelligent-Agent based Approach for Assembly Automation, in Proceedings 2008 IEEE Conference on Soft Computing in Industrial Applications SMCia/08, 2008.
    [BibTex]
    @InProceedings{TUW-165521,
    Title = {Intelligent-Agent based Approach for Assembly Automation},
    Author = {Merdan, Munir and Koppensteiner, Gottfried and Zoitl, Alois and Hegny, Ingo},
    Booktitle = {Proceedings 2008 IEEE Conference on Soft Computing in Industrial Applications SMCia/08},
    Year = {2008},
    Publisher = {IEEE Conference Proceedings},
    Doi = {10.1109/SMCIA.2008.5045928},
    Numpages = {7},
    }
  • M. Merdan, P. Vrba, G. Koppensteiner, and A. Zoitl, Knowledge-based Multi-Agent Architecture for Dynamic Scheduling in Manufacturing Systems, in Proceedings IEEE INDIN 2008, 2008, p. 1075–1080.
    [BibTex]
    @InProceedings{TUW-165945,
    Title = {Knowledge-based Multi-Agent Architecture for Dynamic Scheduling in Manufacturing Systems},
    Author = {Merdan, Munir and Vrba, Pavel and Koppensteiner, Gottfried and Zoitl, Alois},
    Booktitle = {Proceedings IEEE INDIN 2008},
    Year = {2008},
    Note = {Vortrag: IEEE International Conference on Industrial Informatics (INDIN), Daejeon, Korea; 2008-07-13 -- 2008-07-16},
    Pages = {1075--1080},
    ISBN = {978-1-4244-2171-8},
    Url = {http://publik.tuwien.ac.at/files/PubDat_165945.pdf}
    }
  • R. Munnig Schmidt, M. Verhaegen, G. Schitter, N. Doelman, G. Vdovin, K. Boller, F. Bijkerk, M. Steinbuch, N. Rosielle, M. D. De Smet, C. Keller, and R. Stuik, Smart optics: the next step in precision system design, in PACT 2008, 2008.
    [BibTex]
    @Conference{TUW-269306,
    Title = {Smart optics: the next step in precision system design},
    Author = {Munnig Schmidt, Robert and Verhaegen, Michel and Schitter, Georg and Doelman, N. and Vdovin, Gleb and Boller, Klaus-J. and Bijkerk, F. and Steinbuch, Maarten and Rosielle, N. and De Smet, M. D. and Keller, C. and Stuik, R.},
    Booktitle = {PACT 2008},
    Year = {2008},
    }
  • G. Schitter, Improving the speed of SPM by modern control methods, in Proceedings of the International Conference on Precision Measurement ICPM 2008, 2008.
    [BibTex]
    @InProceedings{TUW-269305,
    Title = {Improving the speed of SPM by modern control methods},
    Author = {Schitter, Georg},
    Booktitle = {Proceedings of the International Conference on Precision Measurement ICPM 2008},
    Year = {2008},
    Note = {talk: International Conference on Precision Measurement ICPM 2008, Ilmenau (Germany); 2008-09-08 -- 2008-09-12},
    }
  • G. Schitter and N. Phan, Field programmable analog array (FPAA) based control of an Atomic Force Microscope, in Proceedings of the 2008 American Control Conference, 2008, p. 2690–2695.
    [BibTex]
    @InProceedings{TUW-269272,
    Title = {Field programmable analog array (FPAA) based control of an Atomic Force Microscope},
    Author = {Schitter, Georg and Phan, Ngi},
    Booktitle = {Proceedings of the 2008 American Control Conference},
    Year = {2008},
    Note = {talk: 2008 American Control Conference, Seattle (USA); 2008-06-11 -- 2008-06-13},
    Pages = {2690--2695},
    }
  • G. Schitter, W. F. Rijkée, and N. Phan, Dual actuation for high bandwidth nano-positioning, in Proceedings of the 2008 Conference on Decision and Control, 2008, p. 5176–5181.
    [BibTex]
    @InProceedings{TUW-269271,
    Title = {Dual actuation for high bandwidth nano-positioning},
    Author = {Schitter, Georg and Rijk{\'e}e, Wouter F. and Phan, Ngi},
    Booktitle = {Proceedings of the 2008 Conference on Decision and Control},
    Year = {2008},
    Note = {talk: 2008 Conference on Decision and Control, Cancun (Mexico); 2008-12-09 -- 2008-12-11},
    Pages = {5176--5181},
    }
  • T. Strasser, M. Rooker, G. Ebenhofer, A. Zoitl, C. K. Sünder, A. Valentini, and A. Martel, Framework for Distributed Industrial Automation and Control (4DIAC), in Proceedings IEEE INDIN 2008, 2008, p. 283–288.
    [BibTex]
    @InProceedings{TUW-165942,
    Title = {Framework for Distributed Industrial Automation and Control (4DIAC)},
    Author = {Strasser, Thomas and Rooker, Martijn and Ebenhofer, Gerhard and Zoitl, Alois and S{\"u}nder, Christoph Karl and Valentini, Antonio and Martel, Allan},
    Booktitle = {Proceedings IEEE INDIN 2008},
    Year = {2008},
    Note = {Vortrag: IEEE International Conference on Industrial Informatics (INDIN), Daejeon, Korea; 2008-07-13 -- 2008-07-16},
    Pages = {283--288},
    Doi = {10.1109/INDIN.2008.4618110},
    ISBN = {978-1-4244-2171-8},
    }
  • T. Strasser, M. Rooker, G. Ebenhofer, A. Zoitl, C. K. Sünder, A. Valentini, and A. Martel, Structuring of Large Scale Distributed Control Programs with IEC 61499 Subapplications and a Hierarchical Plant Structure Model, in Proceedings IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2008.
    [BibTex]
    @InProceedings{TUW-166816,
    Title = {Structuring of Large Scale Distributed Control Programs with IEC 61499 Subapplications and a Hierarchical Plant Structure Model},
    Author = {Strasser, Thomas and Rooker, Martijn and Ebenhofer, Gerhard and Zoitl, Alois and S{\"u}nder, Christoph Karl and Valentini, Antonio and Martel, Allan},
    Booktitle = {Proceedings IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)},
    Year = {2008},
    Note = {Vortrag: IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Hamburg, Deutschland; 2008-09-15 -- 2008-09-18},
    Doi = {10.1109/ETFA.2008.4638507},
    ISBN = {1-4244-1506-3},
    Numpages = {8},
    }
  • C. K. Sünder, A. Zoitl, J. H. Christensen, H. Steininger, and J. Fritsche, Considering IEC 61131-3 and IEC 61499 in the context of Component Frameworks, in Proceedings IEEE INDIN 2008, 2008, p. 277–282.
    [BibTex]
    @InProceedings{TUW-165944,
    Title = {Considering IEC 61131-3 and IEC 61499 in the context of Component Frameworks},
    Author = {S{\"u}nder, Christoph Karl and Zoitl, Alois and Christensen, James H. and Steininger, Heinrich and Fritsche, Josef},
    Booktitle = {Proceedings IEEE INDIN 2008},
    Year = {2008},
    Note = {Vortrag: IEEE International Conference on Industrial Informatics (INDIN), Daejeon, Korea; 2008-07-13 -- 2008-07-16},
    Pages = {277--282},
    Doi = {10.1109/INDIN.2008.4618109},
    ISBN = {978-1-4244-2171-8},
    }
  • C. K. Sünder, A. Zoitl, O. Hummer-Koppendorfer, T. Strasser, G. Ebenhofer, M. Rooker, and G. Kerbleder, 4DIAC-Framework for Distributed Industrial Automation Control, in 10. Fachtagung EKA 2008 Entwurf komplexer Automatisierungssysteme, 2008, p. 163–174.
    [BibTex]
    @InProceedings{TUW-112719,
    Title = {4DIAC-Framework for Distributed Industrial Automation Control},
    Author = {S{\"u}nder, Christoph Karl and Zoitl, Alois and Hummer-Koppendorfer, Oliver and Strasser, Thomas and Ebenhofer, Gerhard and Rooker, Martijn and Kerbleder, Gerold},
    Booktitle = {10. Fachtagung EKA 2008 Entwurf komplexer Automatisierungssysteme},
    Year = {2008},
    Note = {Posterpr{\"a}sentation: EKA 2008 - Entwurf komplexer Automatisierungssysteme, Magdeburg, Deutschland; 2008-04-16 -- 2008-04-17},
    Pages = {163--174},
    Publisher = {Institut f{\"u}r Automation und Kommunikation, Magdeburg},
    ISBN = {978-3-940961-01-3},
    }
  • C. K. Sünder, A. Zoitl, H. Steininger, and J. Fritsche, Symbiose von IEC 61131-3 und IEC 61499: Integration von scheinbar sehr unterschiedlichen Welten, in 10. Fachtagung EKA 2008 Exntwurf komplexer Automatisierungssysteme, 2008, p. 185–196.
    [BibTex]
    @InProceedings{TUW-112720,
    Title = {Symbiose von IEC 61131-3 und IEC 61499: Integration von scheinbar sehr unterschiedlichen Welten},
    Author = {S{\"u}nder, Christoph Karl and Zoitl, Alois and Steininger, Heinrich and Fritsche, Josef},
    Booktitle = {10. Fachtagung EKA 2008 Exntwurf komplexer Automatisierungssysteme},
    Year = {2008},
    Note = {Vortrag: EKA 2008 - Entwurf komplexer Automatisierungssysteme, Magdeburg, Deutschland; 2008-04-16 -- 2008-04-17},
    Pages = {185--196},
    Publisher = {Institut f{\"u}r Automation und Kommunikation, Magdeburg},
    ISBN = {978-3-940961-01-3},
    }

2007

  • D. Y. Abramovich, S. B. Andersson, L. Y. Pao, and G. Schitter, A Tutorial on the Mechanisms, Dynamics, and Control of Atomic Force Microscopes, in Proceedings of the 2007 American Control Conference, 2007, p. 3488–3502.
    [BibTex]
    @InProceedings{TUW-269273,
    Title = {A Tutorial on the Mechanisms, Dynamics, and Control of Atomic Force Microscopes},
    Author = {Abramovich, Daniel Y. and Andersson, Sean B. and Pao, Lucy Y. and Schitter, Georg},
    Booktitle = {Proceedings of the 2007 American Control Conference},
    Year = {2007},
    Note = {talk: 2007 American Control Conference, New York (USA); 2007-07-11 -- 2007-07-13},
    Pages = {3488--3502},
    }
  • G. Grabmair, A. Zoitl, T. Strasser, and R. Froschauer, Modelling Real-time Constraints Regarding Reconfiguration Aspects for IEC 61499 Control Applications, in Conference Proceedings INDIN 2007, 2, 2007, p. 1135–1140.
    [BibTex]
    @InProceedings{TUW-111552,
    Title = {Modelling Real-time Constraints Regarding Reconfiguration Aspects for IEC 61499 Control Applications},
    Author = {Grabmair, Gunnar and Zoitl, Alois and Strasser, Thomas and Froschauer, Roman},
    Booktitle = {Conference Proceedings INDIN 2007},
    Year = {2007},
    Address = {2},
    Note = {Vortrag: 5th IEEE International Conference on Industrial Informatics (INDIN 2007), Wien; 2007-07-23 -- 2007-07-27},
    Pages = {1135--1140},
    Doi = {10.1109/ETFA.2014.7005209},
    ISBN = {1-4244-0864-4},
    }
  • I. Hegny, R. Holzer, G. Grabmair, A. Zoitl, F. Auinger, and E. Wahlmüller, A Distributed Energy Management Approach for Autonomous Power Supply Systems, in INDIN 2007 Conference Proceedings, 2, 2007, p. 1111–1116.
    [BibTex]
    @InProceedings{TUW-111522,
    Title = {A Distributed Energy Management Approach for Autonomous Power Supply Systems},
    Author = {Hegny, Ingo and Holzer, Roland and Grabmair, Gunnar and Zoitl, Alois and Auinger, Franz and Wahlm{\"u}ller, Ewald},
    Booktitle = {INDIN 2007 Conference Proceedings},
    Year = {2007},
    Address = {2},
    Note = {Vortrag: 5th IEEE International Conference on Industrial Informatics (INDIN 2007), Wien; 2007-07-23 -- 2007-07-27},
    Pages = {1111--1116},
    Doi = {10.1109/INDIN.2007.4384931},
    ISBN = {1-4244-0864-4},
    }
  • R. Jungmann, G. Schitter, G. E. Fantner, M. E. Lauer, P. K. Hansma, and P. J. Thurner, Real-Time Microdamage and Strain Detection during Micromechanical Testing of Single Trabeculae, in Proceedings of the Annual Meeting of the Society of Experimental Mechanics, 2007.
    [BibTex]
    @InProceedings{TUW-269276,
    Title = {Real-Time Microdamage and Strain Detection during Micromechanical Testing of Single Trabeculae},
    Author = {Jungmann, Ralf and Schitter, Georg and Fantner, G. E. and Lauer, M. E. and Hansma, Paul K. and Thurner, Philipp J.},
    Booktitle = {Proceedings of the Annual Meeting of the Society of Experimental Mechanics},
    Year = {2007},
    Note = {talk: Annual Meeting of the Society of Experimental Mechanics, Springfield (USA); 2007-06-03 -- 2007-06-06},
    Keywords = {Trabecular Bone, Fracture, High-Speed Photography, Stress-Whitening, Microdamage, Three-Point Bending, Atomic Force Microscopy, Digital Image Correlation, Strain Detection.},
    Numpages = {11},
    }
  • M. Merdan, G. Koppensteiner, A. Zoitl, and B. Favre-Bulle, Distributed Agents Architecture Applied in Assembly Domain, in Proceedings of the eighth International Symposium on Knowledge and Systems Sciences (KSS’2007), 2007, p. 128–133.
    [BibTex]
    @InProceedings{TUW-111828,
    Title = {Distributed Agents Architecture Applied in Assembly Domain},
    Author = {Merdan, Munir and Koppensteiner, Gottfried and Zoitl, Alois and Favre-Bulle, Bernard},
    Booktitle = {Proceedings of the eighth International Symposium on Knowledge and Systems Sciences (KSS'2007)},
    Year = {2007},
    Note = {Vortrag: International Symposium on Knowledge and Systems Sciences (KSS), Ishikawa, Japan; 2007-11-05 -- 2007-11-07},
    Pages = {128--133},
    ISBN = {978-4-903092-07-2},
    }
  • M. Rooker, C. K. Sünder, T. Strasser, A. Zoitl, O. Hummer-Koppendorfer, and G. Ebenhofer, Zero Downtime Reconfiguration of Distributed Automation Systems: The eCEDAC Approach, in Holonic and Multi-Agent Systems for Manufacturing, 2007, p. 326–337.
    [BibTex]
    @InProceedings{TUW-111509,
    Title = {Zero Downtime Reconfiguration of Distributed Automation Systems: The eCEDAC Approach},
    Author = {Rooker, Martijn and S{\"u}nder, Christoph Karl and Strasser, Thomas and Zoitl, Alois and Hummer-Koppendorfer, Oliver and Ebenhofer, Gerhard},
    Booktitle = {Holonic and Multi-Agent Systems for Manufacturing},
    Year = {2007},
    Note = {Vortrag: Third International Conference on Industrial Applications of Holonic and Multi-Agent -Systems, HoloMAS 2007, Regensburg, Deutschland; 2007-09-03 -- 2007-09-05},
    Pages = {326--337},
    ISBN = {3-540-74478-9},
    }
  • G. Schitter, Advanced mechanical design and control methods for atomic force microscopy in real-time, in Proceedings of the 2007 American Control Conference, 2007, p. 3503–3508.
    [BibTex]
    @InProceedings{TUW-269274,
    Title = {Advanced mechanical design and control methods for atomic force microscopy in real-time},
    Author = {Schitter, Georg},
    Booktitle = {Proceedings of the 2007 American Control Conference},
    Year = {2007},
    Note = {talk: 2007 American Control Conference, New York (USA); 2007-07-11 -- 2007-07-13},
    Pages = {3503--3508},
    }
  • G. Schitter, Mechatronics and Control for Scanning Probe Microscopy at Video-Rate, in Proceedings of PACT 2007, 2007, p. 99–101.
    [BibTex]
    @InProceedings{TUW-269307,
    Title = {Mechatronics and Control for Scanning Probe Microscopy at Video-Rate},
    Author = {Schitter, Georg},
    Booktitle = {Proceedings of PACT 2007},
    Year = {2007},
    Note = {talk: PACT 2007, Hilvarenbeek (the Netherlands); 2007-02-06 -- 2007-02-07},
    Pages = {99--101},
    }
  • H. Song, R. Fraanje, G. Vdovin, G. Schitter, and M. Verhaegen, Hysteresis Compensation for a Piezo Deformable Mirror, in Proceedings of the 6th International Workshop on Adaptive Optics for Industry and Medicine, 2007, p. 112–117.
    [BibTex]
    @InProceedings{TUW-269275,
    Title = {Hysteresis Compensation for a Piezo Deformable Mirror},
    Author = {Song, Hong and Fraanje, Rufus and Vdovin, Gleb and Schitter, Georg and Verhaegen, Michel},
    Booktitle = {Proceedings of the 6th International Workshop on Adaptive Optics for Industry and Medicine},
    Year = {2007},
    Note = {talk: 6th International Workshop on Adaptive Optics for Industry and Medicine, Galway (Ireland); 2007-06-12 -- 2007-06-15},
    Pages = {112--117},
    }
  • T. Strasser, C. K. Sünder, M. Rooker, O. Hummer-Koppendorfer, A. Zoitl, and I. Müller, Enhanced IEC 61499 System Model for Evolution of Control Applications in Distributed Industrial-Process Measurement and Control Systems, in Proceedings of the European Control Conference, 2007.
    [BibTex]
    @InProceedings{TUW-111560,
    Title = {Enhanced IEC 61499 System Model for Evolution of Control Applications in Distributed Industrial-Process Measurement and Control Systems},
    Author = {Strasser, Thomas and S{\"u}nder, Christoph Karl and Rooker, Martijn and Hummer-Koppendorfer, Oliver and Zoitl, Alois and M{\"u}ller, Ingomar},
    Booktitle = {Proceedings of the European Control Conference},
    Year = {2007},
    Note = {Vortrag: European Control Conference (ECC), Kos, Greece; 2007-07-02 -- 2007-07-05},
    Numpages = {8},
    }
  • T. Strasser, C. K. Sünder, A. Zoitl, M. Rooker, and J. E. J. Brunnenkreef, Enhanced IEC 61499 Device Management Execution and Usage for Downtimeless Reconfiguration, in Conference Proceedings INDIN 2007, 2, 2007, p. 1163–1168.
    [BibTex]
    @InProceedings{TUW-111554,
    Title = {Enhanced IEC 61499 Device Management Execution and Usage for Downtimeless Reconfiguration},
    Author = {Strasser, Thomas and S{\"u}nder, Christoph Karl and Zoitl, Alois and Rooker, Martijn and Brunnenkreef, Jeroen E.J.},
    Booktitle = {Conference Proceedings INDIN 2007},
    Year = {2007},
    Address = {2},
    Note = {Vortrag: 5th IEEE International Conference on Industrial Informatics (INDIN 2007), Wien; 2007-07-23 -- 2007-07-27},
    Pages = {1163--1168},
    Doi = {10.1109/INDIN.2007.4384940},
    ISBN = {1-4244-0864-4},
    }
  • C. K. Sünder, A. Zoitl, J. H. Christensen, M. Colla, and T. Strasser, Execution Models for the IEC 61499 elements Composite Function Block and Subapplication, in Conference Proceedings INDIN 2007, 2, 2007, p. 1169–1175.
    [BibTex]
    @InProceedings{TUW-111555,
    Title = {Execution Models for the IEC 61499 elements Composite Function Block and Subapplication},
    Author = {S{\"u}nder, Christoph Karl and Zoitl, Alois and Christensen, James H. and Colla, Marco and Strasser, Thomas},
    Booktitle = {Conference Proceedings INDIN 2007},
    Year = {2007},
    Address = {2},
    Note = {Vortrag: 5th IEEE International Conference on Industrial Informatics (INDIN 2007), Wien; 2007-07-23 -- 2007-07-27},
    Pages = {1169--1175},
    Doi = {10.1109/INDIN.2007.4384941},
    ISBN = {1-4244-0864-4},
    }
  • C. K. Sünder, A. Zoitl, H. Rofner, T. Strasser, and J. E. J. Brunnenkreef, Benchmarking of IEC 61499 runtime environments, in 12th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2007), 2007.
    [BibTex]
    @InProceedings{TUW-111649,
    Title = {Benchmarking of IEC 61499 runtime environments},
    Author = {S{\"u}nder, Christoph Karl and Zoitl, Alois and Rofner, Hermann and Strasser, Thomas and Brunnenkreef, Jeroen E.J.},
    Booktitle = {12th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2007)},
    Year = {2007},
    Publisher = {IEEE Conference Proceedings},
    Doi = {10.1109/EFTA.2007.4416806},
    Numpages = {8},
    }
  • A. Zoitl, G. Grabmair, R. Smodic, and T. Strasser, An Execution Environment for Real-Time Constrained Control Software based on IEC 61499, in Conference Proceedings INDIN 2007, 2, 2007, p. 1117–1122.
    [BibTex]
    @InProceedings{TUW-111558,
    Title = {An Execution Environment for Real-Time Constrained Control Software based on IEC 61499},
    Author = {Zoitl, Alois and Grabmair, Gunnar and Smodic, Rene and Strasser, Thomas},
    Booktitle = {Conference Proceedings INDIN 2007},
    Year = {2007},
    Address = {2},
    Note = {Vortrag: 5th IEEE International Conference on Industrial Informatics (INDIN 2007), Wien; 2007-07-23 -- 2007-07-27},
    Pages = {1117--1122},
    Doi = {10.1109/INDIN.2007.4384932},
    ISBN = {1-4244-0864-4},
    }
  • A. Zoitl, C. K. Sünder, T. Strasser, and M. Colla, A Device and Resource Execution Model for IEC 61499 Control Devices, in Conference Proceedings INDIN 2007, 2, 2007, p. 1143–1149.
    [BibTex]
    @InProceedings{TUW-111553,
    Title = {A Device and Resource Execution Model for IEC 61499 Control Devices},
    Author = {Zoitl, Alois and S{\"u}nder, Christoph Karl and Strasser, Thomas and Colla, Marco},
    Booktitle = {Conference Proceedings INDIN 2007},
    Year = {2007},
    Address = {2},
    Note = {Vortrag: 5th IEEE International Conference on Industrial Informatics (INDIN 2007), Wien; 2007-07-23 -- 2007-07-27},
    Pages = {1143--1149},
    Doi = {10.1109/INDIN.2007.4384937},
    ISBN = {1-4244-0864-4},
    }
  • A. Zoitl, T. Strasser, K. Hall, R. Staron, C. K. Sünder, and B. Favre-Bulle, The Past, Present, and Future of IEC 61499, in Holonic and Multi-Agent Systems for Manufacturing, 2007, p. 1–14.
    [BibTex]
    @InProceedings{TUW-111508,
    Title = {The Past, Present, and Future of IEC 61499},
    Author = {Zoitl, Alois and Strasser, Thomas and Hall, Ken and Staron, Ray and S{\"u}nder, Christoph Karl and Favre-Bulle, Bernard},
    Booktitle = {Holonic and Multi-Agent Systems for Manufacturing},
    Year = {2007},
    Note = {Vortrag: Third International Conference on Industrial Applications of Holonic and Multi-Agent -Systems, HoloMAS 2007, Regensburg, Deutschland; 2007-09-03 -- 2007-09-05},
    Pages = {1--14},
    ISBN = {3-540-74478-9},
    Url = {https://link.springer.com/chapter/10.1007/978-3-540-74481-8_1}
    }

2006

  • G. Grabmair, R. Froschauer, T. Strasser, and A. Zoitl, Modelling Execution Order and Real-time Constraints in IEC 61499 Control Applications, in 2006 IEEE Workshop on Distributed Intelligent Systems, 2006, p. 115–126.
    [BibTex]
    @InProceedings{TUW-110217,
    Title = {Modelling Execution Order and Real-time Constraints in IEC 61499 Control Applications},
    Author = {Grabmair, Gunnar and Froschauer, Roman and Strasser, Thomas and Zoitl, Alois},
    Booktitle = {2006 IEEE Workshop on Distributed Intelligent Systems},
    Year = {2006},
    Note = {Vortrag: IEEE International Conference on Emerging Technologies and Factory Automation (IEEE DIS), Prag, Tschechien; 2006-06-15 -- 2006-06-16},
    Pages = {115--126},
    Publisher = {IEEE Computer Society},
    Doi = {10.1109/DIS.2006.51},
    }
  • O. Hummer-Koppendorfer, C. K. Sünder, A. Zoitl, T. Strasser, M. Rooker, and G. Ebenhofer, Towards Zero-downtime Evolution of Distributed Control Applications via Evolution Control based on IEC 61499, in ETFA 2006 Proceedings, 2006, p. 1285–1292.
    [BibTex]
    @InProceedings{TUW-110504,
    Title = {Towards Zero-downtime Evolution of Distributed Control Applications via Evolution Control based on IEC 61499},
    Author = {Hummer-Koppendorfer, Oliver and S{\"u}nder, Christoph Karl and Zoitl, Alois and Strasser, Thomas and Rooker, Martijn and Ebenhofer, Gerhard},
    Booktitle = {ETFA 2006 Proceedings},
    Year = {2006},
    Note = {Vortrag: 11th IEEE International Conference on Emerging Technologies and Factory Automation, Prag, Tschechien; 2006-09-20 -- 2006-09-22},
    Pages = {1285--1292},
    Doi = {10.1109/ETFA.2006.355415},
    ISBN = {1-4244-0681-1},
    }
  • M. Merdan, V. Kordic, A. Zoitl, and A. Lazinica, Knowledge-based Multi-agent Architecture, in CIMCA’2006, 2006.
    [BibTex]
    @InProceedings{TUW-110718,
    Title = {Knowledge-based Multi-agent Architecture},
    Author = {Merdan, Munir and Kordic, Vedran and Zoitl, Alois and Lazinica, Aleksandar},
    Booktitle = {CIMCA'2006},
    Year = {2006},
    Note = {Vortrag: International Conference on Computational Intelligence for Modelling Control and Automation 2006, Sydney, Australia; 2006-11-29 -- 2006-12-01},
    Doi = {10.1109/CIMCA.2006.140},
    }
  • G. Schitter, K. J. {AA}ström, B. E. DeMartini, K. L. Turner, G. E. Fantner, P. J. Thurner, and P. K. Hansma, Design and modeling of a high-speed scanner for atomic force microscopy, in Proceedings of the 2006 American Control Conference, 2006, p. 502–507.
    [BibTex]
    @InProceedings{TUW-269278,
    Title = {Design and modeling of a high-speed scanner for atomic force microscopy},
    Author = {Schitter, Georg and {\AA}str{\"o}m, Karl J. and DeMartini, Barry E. and Turner, Kimberly L. and Fantner, G. E. and Thurner, Philipp J. and Hansma, Paul K.},
    Booktitle = {Proceedings of the 2006 American Control Conference},
    Year = {2006},
    Note = {talk: 2006 American Control Conference, Minneapolis (USA); 2006-06-14 -- 2006-06-16},
    Pages = {502--507},
    }
  • G. Schitter, G. E. Fantner, P. J. Thurner, J. Adams, and P. K. Hansma, Design and characterization of a novel scanner for high-speed atomic force microscopy, in Proceedings of the 4th IFAC Symposium on Mechatronic Systems, 2006, p. 819–824.
    [BibTex]
    @InProceedings{TUW-269277,
    Title = {Design and characterization of a novel scanner for high-speed atomic force microscopy},
    Author = {Schitter, Georg and Fantner, G. E. and Thurner, Philipp J. and Adams, Jonathan and Hansma, Paul K.},
    Booktitle = {Proceedings of the 4th IFAC Symposium on Mechatronic Systems},
    Year = {2006},
    Note = {talk: 4th IFAC Symposium on Mechatronic Systems, Heidelberg (Germany); 2006-09-12 -- 2006-09-14},
    Pages = {819--824},
    Keywords = {AFM, fast scanning, nano-positioning, nanotechnology, scanning probe, realtime imaging, mechanical design},
    }
  • R. Smodic, A. Zoitl, G. Grabmair, and T. Strasser, A Real-Time Execution Model for IEC 61499 based Control Applications, in incom 2006, Information Systems, Control and Interoperability, Saint-Etienne, Frankreich, 2006.
    [BibTex]
    @InProceedings{TUW-110183,
    Title = {A Real-Time Execution Model for IEC 61499 based Control Applications},
    Author = {Smodic, Rene and Zoitl, Alois and Grabmair, Gunnar and Strasser, Thomas},
    Booktitle = {incom 2006, Information Systems, Control and Interoperability},
    Year = {2006},
    Address = {Saint-Etienne, Frankreich},
    Note = {Vortrag: 12th IFAC Symposium on Information Control Problems in Manufacturing, Saint Etienne, Frankreich; 2006-05-17 -- 2006-05-19},
    }
  • T. Strasser, I. Müller, M. Schüpany, G. Ebenhofer, R. Mungenast, C. K. Sünder, A. Zoitl, O. Hummer-Koppendorfer, S. Thomas, and H. Steininger, An Advanced Engineering Environment for Distributed & Reconfigurable Industrial Automation & Control Systems based on IEC 61499, in IPROMS2006 Intelligent Production Machines and Systems, 2006, p. 493–498.
    [BibTex]
    @InProceedings{TUW-110568,
    Title = {An Advanced Engineering Environment for Distributed {\&} Reconfigurable Industrial Automation {\&} Control Systems based on IEC 61499},
    Author = {Strasser, Thomas and M{\"u}ller, Ingomar and Sch{\"u}pany, Mario and Ebenhofer, Gerhard and Mungenast, Roland and S{\"u}nder, Christoph Karl and Zoitl, Alois and Hummer-Koppendorfer, Oliver and Thomas, Siegmar and Steininger, Heinrich},
    Booktitle = {IPROMS2006 Intelligent Production Machines and Systems},
    Year = {2006},
    Note = {Vortrag: Intelligent Production Machines and Systems (IPROMS), Cardiff, England; 2006-07-03 -- 2006-07-14},
    Pages = {493--498},
    ISBN = {978-0-08-045157-2},
    }
  • C. K. Sünder, A. Zoitl, J. H. Christensen, V. Vyatkin, R. W. Brennan, A. Valentini, L. Ferrarini, T. Strasser, J. L. Martinez-Lastra, and F. Auinger, Usability and Interoperability of IEC 61499 based distributed automation systems, in Integrating Manufacturing and Services Systems, 2006, p. 31–37.
    [BibTex]
    @InProceedings{TUW-110445,
    Title = {Usability and Interoperability of IEC 61499 based distributed automation systems},
    Author = {S{\"u}nder, Christoph Karl and Zoitl, Alois and Christensen, James H. and Vyatkin, Valeriy and Brennan, Robert W. and Valentini, Antonio and Ferrarini, Luca and Strasser, Thomas and Martinez-Lastra, Jose L. and Auinger, Franz},
    Booktitle = {Integrating Manufacturing and Services Systems},
    Year = {2006},
    Note = {Vortrag: IEEE International Conference on Industrial Informatics (INDIN), Singapore; 2006-08-16 -- 2006-08-18},
    Pages = {31--37},
    Doi = {10.1109/INDIN.2006.275713},
    }
  • C. K. Sünder, A. Zoitl, B. Favre-Bulle, T. Strasser, H. Steininger, and S. Thomas, Towards Reconfiguration Applications as basis for Control System Evolution in Zero-downtime Automation Systems, in IPROMS2006 Intelligent Production Machines and Systems, 2006, p. 523–528.
    [BibTex]
    @InProceedings{TUW-110566,
    Title = {Towards Reconfiguration Applications as basis for Control System Evolution in Zero-downtime Automation Systems},
    Author = {S{\"u}nder, Christoph Karl and Zoitl, Alois and Favre-Bulle, Bernard and Strasser, Thomas and Steininger, Heinrich and Thomas, Siegmar},
    Booktitle = {IPROMS2006 Intelligent Production Machines and Systems},
    Year = {2006},
    Note = {Vortrag: Intelligent Production Machines and Systems (IPROMS), Cardiff, England; 2006-07-03 -- 2006-07-14},
    Pages = {523--528},
    ISBN = {978-0-08-045157-2},
    }
  • C. K. Sünder, A. Zoitl, M. Rainbauer, and B. Favre-Bulle, Hierarchical Control Modelling Architecture for Modular Distributed Automation Systems, in Integrating Manufacturing and Services Systems, 2006, p. 12–17.
    [BibTex]
    @InProceedings{TUW-110441,
    Title = {Hierarchical Control Modelling Architecture for Modular Distributed Automation Systems},
    Author = {S{\"u}nder, Christoph Karl and Zoitl, Alois and Rainbauer, Michael and Favre-Bulle, Bernard},
    Booktitle = {Integrating Manufacturing and Services Systems},
    Year = {2006},
    Note = {Vortrag: IEEE International Conference on Industrial Informatics (INDIN), Singapore; 2006-08-16 -- 2006-08-18},
    Pages = {12--17},
    Doi = {10.1109/INDIN.2006.275710},
    }
  • A. Zoitl, C. K. Sünder, and I. Terzic, Dynamic Reconfiguration of Distrubuted Control Applications with Reconfiguration Services based on IEC 61499, in 2006 IEEE Workshop on Distributed Intelligent Systems, 2006, p. 109–114.
    [BibTex]
    @InProceedings{TUW-110215,
    Title = {Dynamic Reconfiguration of Distrubuted Control Applications with Reconfiguration Services based on IEC 61499},
    Author = {Zoitl, Alois and S{\"u}nder, Christoph Karl and Terzic, Ivanka},
    Booktitle = {2006 IEEE Workshop on Distributed Intelligent Systems},
    Year = {2006},
    Note = {Vortrag: IEEE Workshop on Distributed Intelligent Systems - Collective Intelligence and Its Applications (IEEE DIS), Prag, Tschechien; 2006-06-15 -- 2006-06-16},
    Pages = {109--114},
    Publisher = {IEEE Computer Society},
    }
  • A. Zoitl, R. Smodic, C. K. Sünder, and G. Grabmair, Enhanced Real-Time Execution of Modular Control Software based on IEC 61499, in Proceedings 2006 IEEE International Conference on Robotics and Automation, Orlando, Florida, USA, 2006, p. 327–332.
    [BibTex]
    @InProceedings{TUW-110327,
    Title = {Enhanced Real-Time Execution of Modular Control Software based on IEC 61499},
    Author = {Zoitl, Alois and Smodic, Rene and S{\"u}nder, Christoph Karl and Grabmair, Gunnar},
    Booktitle = {Proceedings 2006 IEEE International Conference on Robotics and Automation, Orlando, Florida, USA},
    Year = {2006},
    Pages = {327--332},
    Publisher = {IEEE Press},
    Doi = {10.1109/ROBOT.2006.1641732},
    ISBN = {0-7803-9506-9},
    }

2005

  • P. K. Hansma, G. E. Fantner, J. H. Kindt, P. J. Thurner, G. Schitter, P. Turner, S. F. Udwin, and M. M. Finch, Sacrificial bonds in bone (the glue in our bones), in Journal of Musculoskelet and Neuronal Interaction, 5(4), 2005, p. 313–315.
    [BibTex]
    @InProceedings{TUW-269322,
    Title = {Sacrificial bonds in bone (the glue in our bones)},
    Author = {Hansma, Paul K. and Fantner, G. E. and Kindt, J. H. and Thurner, Philipp J. and Schitter, Georg and Turner, Patricia and Udwin, S. F. and Finch, Marquesa M.},
    Booktitle = {Journal of Musculoskelet and Neuronal Interaction},
    Year = {2005},
    Address = {5(4)},
    Note = {talk: 35th International Sun Valley Workshop On Skeletal Tissue Biology, Sun Valley (USA); 2005-07-31 -- 2005-08-03},
    Pages = {313--315},
    }
  • O. Hummer-Koppendorfer, I. Terzic, A. Zoitl, and T. Strasser, Development of an Extensible Engineering Support Tool for IEC 61499 Considering WYSIWYG GUI Building as Example, in Proceedings of the 10th IEEE International Conference on Emerging Technologies and Factory Automation ( ETFA 2005), 2005.
    [BibTex]
    @InProceedings{TUW-109156,
    Title = {Development of an Extensible Engineering Support Tool for IEC 61499 Considering WYSIWYG GUI Building as Example},
    Author = {Hummer-Koppendorfer, Oliver and Terzic, Ivanka and Zoitl, Alois and Strasser, Thomas},
    Booktitle = {Proceedings of the 10th IEEE International Conference on Emerging Technologies and Factory Automation ( ETFA 2005)},
    Year = {2005},
    Publisher = {IEEE Press},
    Doi = {10.1109/ETFA.2005.1612731},
    ISBN = {0-7803-9402-x},
    }
  • J. H. Kindt, G. E. Fantner, P. J. Thurner, G. Schitter, and P. K. Hansma, A New Technique for Imaging Mineralized Fibrils on Bovine Trabecular Bone Fracture Surfaces by Atomic Force Microscopy, in Proceedings of the Material Research Society Symposium 2005, 2005.
    [BibTex]
    @InProceedings{TUW-269325,
    Title = {A New Technique for Imaging Mineralized Fibrils on Bovine Trabecular Bone Fracture Surfaces by Atomic Force Microscopy},
    Author = {Kindt, J. H. and Fantner, G. E. and Thurner, Philipp J. and Schitter, Georg and Hansma, Paul K.},
    Booktitle = {Proceedings of the Material Research Society Symposium 2005},
    Year = {2005},
    Note = {talk: Material Research Society Symposium 2005, Warrendale (USA); 2005-00-00},
    Numpages = {7},
    }
  • M. Merdan, I. Terzic, A. Zoitl, and B. Favre-Bulle, Intelligent Reconfiguration Using Knowledge Based Agent System, in Proceedings ETFA 2005, 2005, p. 1051–1054.
    [BibTex]
    @InProceedings{TUW-109224,
    Title = {Intelligent Reconfiguration Using Knowledge Based Agent System},
    Author = {Merdan, Munir and Terzic, Ivanka and Zoitl, Alois and Favre-Bulle, Bernard},
    Booktitle = {Proceedings ETFA 2005},
    Year = {2005},
    Note = {Vortrag: 10th IEEE International Conference on Emerging Technologies and Factory Automation, Catania, Italien; 2005-09-19 -- 2005-09-22},
    Pages = {1051--1054},
    Doi = {10.1109/ETFA.2005.1612641},
    ISBN = {0-7803-9402-x},
    }
  • J. M. Rieber, G. Schitter, A. Stemmer, and F. Allgöwer, Experimental application of l1-optimal control for an atomic force microscope, in Proceedings of the 16th Triennial IFAC World Congress, 2005, p. 664–669.
    [BibTex]
    @InProceedings{TUW-269288,
    Title = {Experimental application of l1-optimal control for an atomic force microscope},
    Author = {Rieber, Jochen M. and Schitter, Georg and Stemmer, A. and Allg{\"o}wer, F.},
    Booktitle = {Proceedings of the 16th Triennial IFAC World Congress},
    Year = {2005},
    Note = {talk: 16th Triennial IFAC World Congress, Prague (Czech Republic); 2005-07-04 -- 2005-07-08},
    Pages = {664--669},
    Keywords = {l1-optimal control, 2-DOF control design, atomic force microscopy, experimental application},
    }
  • G. Schitter, G. E. Fantner, J. H. Kindt, P. J. Thurner, and P. K. Hansma, On recent developments for high-speed atomic force microscopy, in Proceedings IEEE/ASME International Conference on Advanced Intelligent Mechatronics AIM2005, 2005, p. 261–264.
    [BibTex]
    @InProceedings{TUW-269279,
    Title = {On recent developments for high-speed atomic force microscopy},
    Author = {Schitter, Georg and Fantner, G. E. and Kindt, J. H. and Thurner, Philipp J. and Hansma, Paul K.},
    Booktitle = {Proceedings IEEE/ASME International Conference on Advanced Intelligent Mechatronics AIM2005},
    Year = {2005},
    Note = {talk: IEEE/ASME International Conference on Advanced Intelligent Mechatronics AIM2005, Piscataway (USA); 2005-00-00},
    Pages = {261--264},
    }
  • T. Strasser, I. Müller, A. Zoitl, C. K. Sünder, and G. Grabmair, A Distributed Control Environment for Reconfigurable Manufacturing, in IPROMS 2005 Conference, 2005.
    [BibTex]
    @InProceedings{TUW-109228,
    Title = {A Distributed Control Environment for Reconfigurable Manufacturing},
    Author = {Strasser, Thomas and M{\"u}ller, Ingomar and Zoitl, Alois and S{\"u}nder, Christoph Karl and Grabmair, Gunnar},
    Booktitle = {IPROMS 2005 Conference},
    Year = {2005},
    Publisher = {IPROMS},
    Numpages = {6},
    }
  • T. Strasser, A. Zoitl, F. Auinger, and C. K. Sünder, Towards Engineering Methods for Reconfiguration of Distributed Real-Time Control Systems Based on the Reference Model of IEC 61499, in Holonic and Multi-Agent Systems for Manufacturing, 2005, p. 165–175.
    [BibTex]
    @InProceedings{TUW-109231,
    Title = {Towards Engineering Methods for Reconfiguration of Distributed Real-Time Control Systems Based on the Reference Model of IEC 61499},
    Author = {Strasser, Thomas and Zoitl, Alois and Auinger, Franz and S{\"u}nder, Christoph Karl},
    Booktitle = {Holonic and Multi-Agent Systems for Manufacturing},
    Year = {2005},
    Note = {Vortrag: Second International Conference on Industrial Applications of Holonic and Multi-Agent Systems, HoloMAS 2005, Copenhagen, Denmark, ,; 2005-08-22 -- 2005-08-24},
    Pages = {165--175},
    ISSN = {0302-9743},
    Url = {https://link.springer.com/chapter/10.1007/11537847_15}
    }
  • C. K. Sünder, A. Zoitl, T. Strasser, and B. Favre-Bulle, Intuitive Control Engineering for Mechatronic Components in Distributed Automation Systems based on the reference model of IEC 61499, in Proceedings INDIN2005, 2005.
    [BibTex]
    @InProceedings{TUW-109155,
    Title = {Intuitive Control Engineering for Mechatronic Components in Distributed Automation Systems based on the reference model of IEC 61499},
    Author = {S{\"u}nder, Christoph Karl and Zoitl, Alois and Strasser, Thomas and Favre-Bulle, Bernard},
    Booktitle = {Proceedings INDIN2005},
    Year = {2005},
    Note = {Vortrag: INDIN2005 3rd International IEEE Conference on Industrial Informatics, Perth, Australia; 2005-08-10 -- 2005-08-12},
    Doi = {10.1109/INDIN.2005.1560351},
    ISBN = {0-7803-9095-4},
    }
  • P. J. Thurner, B. Erickson, Z. Schriock, J. Langan, J. S. Scott, M. Zhao, G. E. Fantner, P. Turner, J. H. Kindt, G. Schitter, and P. K. Hansma, High-Speed Photography of Human Trabecular Bone during Compression, in Structure and Mechanical Behavior of Biological Materials, 2005.
    [BibTex]
    @InProceedings{TUW-269324,
    Title = {High-Speed Photography of Human Trabecular Bone during Compression},
    Author = {Thurner, Philipp J. and Erickson, Blake and Schriock, Zachary and Langan, John and Scott, J.S. and Zhao, Maria and Fantner, G. E. and Turner, Patricia and Kindt, J. H. and Schitter, Georg and Hansma, Paul K.},
    Booktitle = {Structure and Mechanical Behavior of Biological Materials},
    Year = {2005},
    Note = {talk: Symposium on Structure and Mechanical Behavior of Biological Materials, San Francisco (USA); 2005-03-29 -- 2005-03-31},
    Numpages = {6},
    }
  • P. J. Thurner, R. Müller, J. H. Kindt, G. Schitter, G. E. Fantner, P. Wyss, U. Senhauser, and P. K. Hansma, Novel techniques for high resolution functional imaging of trabecular bone, in SPIE, 2005, p. 515–526.
    [BibTex]
    @InProceedings{TUW-269286,
    Title = {Novel techniques for high resolution functional imaging of trabecular bone},
    Author = {Thurner, Philipp J. and M{\"u}ller, Ralph and Kindt, J. H. and Schitter, Georg and Fantner, G. E. and Wyss, Peter and Senhauser, Urs and Hansma, Paul K.},
    Booktitle = {SPIE},
    Year = {2005},
    Pages = {515--526},
    Publisher = {SPIE},
    Volume = {5746},
    Keywords = {Imaging, Image Processing, Micro-Computed Tomography, Synchrotron Radiation, Bone, Nano Composite, Image Guided Failure Assessment, Microdamage, Atomic Force Microscopy},
    }
  • A. Zoitl, G. Grabmair, F. Auinger, and C. K. Sünder, Executing real-time constrained Control Applications modelled in IEC 61499 with respect to Dynamic reconfiguration, in Proceedings INDIN2005, 2005.
    [BibTex]
    @InProceedings{TUW-109154,
    Title = {Executing real-time constrained Control Applications modelled in IEC 61499 with respect to Dynamic reconfiguration},
    Author = {Zoitl, Alois and Grabmair, Gunnar and Auinger, Franz and S{\"u}nder, Christoph Karl},
    Booktitle = {Proceedings INDIN2005},
    Year = {2005},
    Note = {Vortrag: INDIN2005 3rd International IEEE Conference on Industrial Informatics, Perth, Australia; 2005-08-10 -- 2005-08-12},
    Doi = {10.1109/INDIN.2005.1560353},
    ISBN = {0-7803-9095-4},
    }

2004

  • T. Strasser, F. Auinger, and A. Zoitl, Development, Implementation and Use of an IEC61499 Function Block Library for Embedded Closed Loop Control, in Proceedings of INDIN’04, 2004.
    [BibTex]
    @InProceedings{TUW-108582,
    Title = {Development, Implementation and Use of an IEC61499 Function Block Library for Embedded Closed Loop Control},
    Author = {Strasser, Thomas and Auinger, Franz and Zoitl, Alois},
    Booktitle = {Proceedings of INDIN'04},
    Year = {2004},
    Note = {Vortrag: IEEE International Conference on Industrial Informatics (INDIN), Berlin; 2004-06-24 -- 2004-06-26},
    Doi = {10.1109/INDIN.2004.1417415},
    Numpages = {6},
    }
  • A. Zoitl, F. Auinger, V. Vyatkin, and J. M. L. Lastra, Towards basic real-time reconfiguration services for next generation zero-downtime Automation systems, in Internatinal IMS Forum 2004, Global Challenges in Manufacturing, 2004, p. 29–36.
    [BibTex]
    @InProceedings{TUW-108583,
    Title = {Towards basic real-time reconfiguration services for next generation zero-downtime Automation systems},
    Author = {Zoitl, Alois and Auinger, Franz and Vyatkin, Valeriy and Lastra, Jose L. Martintez},
    Booktitle = {Internatinal IMS Forum 2004, Global Challenges in Manufacturing},
    Year = {2004},
    Note = {Vortrag: International IMS Forum, Cernobbio, Italy; 2004-05-17 -- 2004-05-19},
    Pages = {29--36},
    ISBN = {88-901168-9-7},
    }

2003

  • G. Schitter, A. Stemmer, and F. Allgöwer, Robust 2DOF-control of a piezoelectric tube scanner for high speed atomic force microscopy, in IEEE Proceedings of the 2003 American Control Conference, 2003, p. 3720–3725.
    [BibTex]
    @InProceedings{TUW-269290,
    Title = {Robust 2DOF-control of a piezoelectric tube scanner for high speed atomic force microscopy},
    Author = {Schitter, Georg and Stemmer, A. and Allg{\"o}wer, F.},
    Booktitle = {IEEE Proceedings of the 2003 American Control Conference},
    Year = {2003},
    Note = {talk: 2003 American Control Conference, Denver (USA); 2003-06-04 -- 2003-06-06},
    Pages = {3720--3725},
    }
  • T. Schmidt, G. Wippel, K. Glanzer, and H. Fürst, Utilizing Open-Source Technologies Prevent Vendor-Dependent Business Solutions, in Building the Knowledge Economy – Issues, Applications, Case Studies,Part 2, 2, 2003, p. 1283–1289.
    [BibTex]
    @InProceedings{TUW-109974,
    Title = {Utilizing Open-Source Technologies Prevent Vendor-Dependent Business Solutions},
    Author = {Schmidt, Thomas and Wippel, Gerald and Glanzer, Klaus and F{\"u}rst, Hans},
    Booktitle = {Building the Knowledge Economy - Issues, Applications, Case Studies,Part 2},
    Year = {2003},
    Address = {2},
    Note = {Vortrag: Building the Knowledge Economy, Amsterdam, The Netherlands; 2003-00-00},
    Pages = {1283--1289},
    Publisher = {IOS Press},
    }
  • R. Stark, G. Schitter, M. Stark, R. Guckenberger, and A. Stemmer, Towards time-resolved dynamic atomic force microscopy: A state space model of the AFM, in Acoustical Imaging, 2003, p. 741–748.
    [BibTex]
    @InProceedings{TUW-269289,
    Title = {Towards time-resolved dynamic atomic force microscopy: A state space model of the AFM},
    Author = {Stark, Robert and Schitter, Georg and Stark, Martin and Guckenberger, Reinhard and Stemmer, A.},
    Booktitle = {Acoustical Imaging},
    Year = {2003},
    Pages = {741--748},
    Publisher = {Acoustical Imaging},
    }
  • R. Stark, G. Schitter, and A. Stemmer, Tuning tip sample forces in dynamic atomic-force microscopy, in Proceedings of the 12th International Conference on Scanning Tunneling Microscopy/Spectroscopy and Related Techniques, 2003, p. 377–384.
    [BibTex]
    @InProceedings{TUW-269308,
    Title = {Tuning tip sample forces in dynamic atomic-force microscopy},
    Author = {Stark, Robert and Schitter, Georg and Stemmer, A.},
    Booktitle = {Proceedings of the 12th International Conference on Scanning Tunneling Microscopy/Spectroscopy and Related Techniques},
    Year = {2003},
    Note = {talk: 12th International Conference on Scanning Tunneling Microscopy/Spectroscopy and Related Techniques, Eindhoven (the Netherlands); 2003-00-00},
    Pages = {377--384},
    }
  • A. Zoitl, Skalierbare IEC 61499 basierte Embedded Systems für verteilte Steuerungssysteme, in Tagungsband, 2003, p. 233–239.
    [BibTex]
    @InProceedings{TUW-107189,
    Title = {Skalierbare IEC 61499 basierte Embedded Systems f{\"u}r verteilte Steuerungssysteme},
    Author = {Zoitl, Alois},
    Booktitle = {Tagungsband},
    Year = {2003},
    Note = {Posterpr{\"a}sentation: Informationstagung Mikroelektronik (ME), Wien; 2003-10-01 -- 2003-10-02},
    Pages = {233--239},
    ISBN = {3-85133-030-7},
    }
  • A. Zoitl, W. Rumpl, and C. Dutzler, Skalierbare IEC 61499 Steuerungsplattform für verteilte Automatisierungslösungen, in Tagungsband SPS/IPC/DRIVES 2003, 2003, p. 311–319.
    [BibTex]
    @InProceedings{TUW-107190,
    Title = {Skalierbare IEC 61499 Steuerungsplattform f{\"u}r verteilte Automatisierungsl{\"o}sungen},
    Author = {Zoitl, Alois and Rumpl, Werner and Dutzler, Christoph},
    Booktitle = {Tagungsband SPS/IPC/DRIVES 2003},
    Year = {2003},
    Note = {Vortrag: Kongress SPS/IPC/DRIVES 2003, N{\"u}rnberg; 2003-11-25 -- 2003-11-27},
    Pages = {311--319},
    ISBN = {3-8007-2793-5},
    }

2002

  • W. Rumpl, F. Auinger, C. Dutzler, and A. Zoitl, Platforms for Scalable Flexible Automation Considering the Concepts of IEC 61499, in Knowledge and Technology Integration in Production and Services, 2002, p. 237–246.
    [BibTex]
    @InProceedings{TUW-111842,
    Title = {Platforms for Scalable Flexible Automation Considering the Concepts of IEC 61499},
    Author = {Rumpl, Werner and Auinger, Franz and Dutzler, Christoph and Zoitl, Alois},
    Booktitle = {Knowledge and Technology Integration in Production and Services},
    Year = {2002},
    Note = {Vortrag: 5th International Conference on InformationTechnology for Balanced Automation Systems in Manufacturing and Services, Cancun, Mexiko; 2002-09-25 -- 2002-09-27},
    Pages = {237--246},
    Publisher = {Kluwer Academic Publishers},
    ISBN = {1-4020-7211-2},
    Url = {https://link.springer.com/chapter/10.1007%2F978-0-387-35613-6_26}
    }
  • G. Schitter, R. Stark, and A. Stemmer, Fast feedback control of piezoelectric actuators, in Actuator 2002, 2002, p. 430–433.
    [BibTex]
    @InProceedings{TUW-269309,
    Title = {Fast feedback control of piezoelectric actuators},
    Author = {Schitter, Georg and Stark, Robert and Stemmer, A.},
    Booktitle = {Actuator 2002},
    Year = {2002},
    Note = {talk: 8th International Conference on New Actuators, Bremen (Germany); 2002-06-10 -- 2002-06-12},
    Pages = {430--433},
    }

Bücher und Buchbeiträge

2016

  • R. Hametner, I. Hegny, and A. Zoitl, Unit Test Framework for IEC 61499 Function Blocks, in Distributed Control Applications, A. Zoitl and T. Strasser, Eds., CRC Press, Boca Raton, London, New York (Taylor {&} Francis Group), 2016, p. 123–144.
    [BibTex]
    @InCollection{TUW-256257,
    Title = {Unit Test Framework for IEC 61499 Function Blocks},
    Author = {Hametner, Reinhard and Hegny, Ingo and Zoitl, Alois},
    Booktitle = {Distributed Control Applications},
    Publisher = {CRC Press, Boca Raton, London, New York (Taylor {\&} Francis Group)},
    Year = {2016},
    Editor = {Zoitl, Alois and Strasser, Thomas},
    Pages = {123--144},
    ISBN = {9781482259056},
    }
  • M. Wenger, A. Zoitl, and G. Schitter, Automatic Reengineering of IEC 61131-Based Control Applications into IEC 61499, in Distributed Control Applications, A. Zoitl and T. Strasser, Eds., CRC Press, Boca Raton, London, New York (Taylor {&} Francis Group), 2016, p. 97–121.
    [BibTex]
    @InCollection{TUW-256538,
    Title = {Automatic Reengineering of IEC 61131-Based Control Applications into IEC 61499},
    Author = {Wenger, Monika and Zoitl, Alois and Schitter, Georg},
    Booktitle = {Distributed Control Applications},
    Publisher = {CRC Press, Boca Raton, London, New York (Taylor {\&} Francis Group)},
    Year = {2016},
    Editor = {Zoitl, Alois and Strasser, Thomas},
    Pages = {97--121},
    ISBN = {9781482259056}
    }

2015

  • M. Faschang, E. Xypolytou, M. Meisel, A. Wendt, T. Kaufmann, M. Litzlbauer, J. Marchgraber, M. Bibl, A. Prostejovsky, T. Gawron-Deutsch, and G. Kienesberger, ICT4RobustGrid Transition Roadmap – from Centralized to Massively Decentralized Grid Control Systems, Eigenverlag, Wien, Institut für Computertechnik der TU Wien, 2015.
    [BibTex]
    @Book{TUW-1210182,
    Title = {ICT4RobustGrid Transition Roadmap - from Centralized to Massively Decentralized Grid Control Systems},
    Author = {Faschang, M. and Xypolytou, E. and Meisel, M. and Wendt, A. and Kaufmann, Th. and Litzlbauer, M. and Marchgraber, J. and Bibl, M. and Prostejovsky, A. and Gawron-Deutsch, T. and Kienesberger, G.},
    Publisher = {Eigenverlag, Wien, Institut f\"{u}r Computertechnik der TU Wien},
    Year = {2015},
    }

2014

  • R. Munnig Schmidt, G. Schitter, A. Rankers, and J. van Eijk, The Design of High Performance Mechatronics: 2nd Edition. High-Tech Functionality by Multidisciplinary System Integration, Delft University Press, 2014.
    [BibTex]
    @Book{TUW-232125,
    Title = {The Design of High Performance Mechatronics: 2nd Edition. High-Tech Functionality by Multidisciplinary System Integration},
    Author = {Munnig Schmidt, Robert and Schitter, Georg and Rankers, Adrian and van Eijk, Jan},
    Publisher = {Delft University Press},
    Year = {2014},
    ISBN = {978-1614993674}
    }

2013

  • R. Hametner, B. Kormann, B. Vogel-Heuser, D. Winkler, and A. Zoitl, Automated test case generation for industrial control applications, in In Recent Advances in Robotics and Automation, Springer-Verlag, Berlin-Heidelberg, 2013, p. 263–273.
    [BibTex]
    @InCollection{TUW-222308,
    Title = {Automated test case generation for industrial control applications},
    Author = {Hametner, Reinhard and Kormann, Benjamin and Vogel-Heuser, Birgit and Winkler, Dietmar and Zoitl, Alois},
    Booktitle = {In Recent Advances in Robotics and Automation},
    Publisher = {Springer-Verlag, Berlin-Heidelberg},
    Year = {2013},
    Pages = {263--273},
    Doi = {10.1007/978-3-642-37387-9{\_}20},
    ISBN = {978-3-642-37386-2},
    }
  • P. Novak, M. Melik-Merkumians, M. Steinegger, T. Moser, R. Sindelar, and A. Zoitl, Extraction of Automation System Engineering Knowledge for Mapping Plant and Simulation Interfaces, in Service Orientation in Holonic and Multi-agent Manufacturing and Robotics, Springer, 2013.
    [BibTex]
    @InCollection{TUW031020173,
    Title = {Extraction of Automation System Engineering Knowledge for Mapping Plant and Simulation Interfaces},
    Author = {Novak, P and Melik-Merkumians, M. and Steinegger, M. and Moser, T. and Sindelar, R. and Zoitl, A.},
    Booktitle = {Service Orientation in Holonic and Multi-agent Manufacturing and Robotics},
    Publisher = {Springer},
    Year = {2013},
    }

2011

  • S. Kuiper and G. Schitter, Improving the Imaging Speed of AFM with Modern Control Techniques, in Control Technologies for Emerging Micro and Nanoscale Systems, Berlin-Heidelberg: Springer-Verlag, Berlin-Heidelberg, 2011, p. 83–100.
    [BibTex]
    @InCollection{TUW-198510,
    Title = {Improving the Imaging Speed of AFM with Modern Control Techniques},
    Author = {Kuiper, Stefan and Schitter, Georg},
    Booktitle = {Control Technologies for Emerging Micro and Nanoscale Systems},
    Publisher = {Springer-Verlag, Berlin-Heidelberg},
    Year = {2011},
    Address = {Berlin-Heidelberg},
    Pages = {83--100},
    Doi = {10.1007/978-3-642-22173-6},
    ISBN = {978-3-642-22172-9}
    }
  • R. Munnig Schmidt, G. Schitter, and J. van Eijk, The Design of High Performance Mechatronics: High-Tech Functionality by Multidisciplinary System Integration, Delft University Press, 2011.
    [BibTex]
    @Book{TUW-201717,
    Title = {The Design of High Performance Mechatronics: High-Tech Functionality by Multidisciplinary System Integration},
    Author = {Munnig Schmidt, Robert and Schitter, Georg and van Eijk, Jan},
    Publisher = {Delft University Press},
    Year = {2011},
    ISBN = {978-1-60750-825-0}
    }
  • T. Strasser, A. Zoitl, and M. Rooker, Zero-Downtime Reconfiguration of Distributed Control Logic in Industrial Automation and Control, in Reconfigurable Embedded Control Systems: Applications for Flexibility and Agility, IGI Global, 2011, p. 55–81.
    [BibTex]
    @InCollection{TUW-195782,
    Title = {Zero-Downtime Reconfiguration of Distributed Control Logic in Industrial Automation and Control},
    Author = {Strasser, Thomas and Zoitl, Alois and Rooker, Martijn},
    Booktitle = {Reconfigurable Embedded Control Systems: Applications for Flexibility and Agility},
    Publisher = {IGI Global},
    Year = {2011},
    Pages = {55--81},
    Doi = {10.4018/978-1-60960-086-0},
    ISBN = {9781609600860},
    }
  • A. Zoitl and W. Lepuschitz, Process Automation, in The Industrial Electronics Handbook, Taylor and Francis/CRC Press, 2011, p. 25-1–25-11.
    [BibTex]
    @InCollection{TUW-198531,
    Title = {Process Automation},
    Author = {Zoitl, Alois and Lepuschitz, Wilfried},
    Booktitle = {The Industrial Electronics Handbook},
    Publisher = {Taylor and Francis/CRC Press},
    Year = {2011},
    Pages = {25-1--25-11},
    ISBN = {978-1-4398-0281-6},
    }

2010

  • A. Zoitl and C. Sünder, Verteilte Intelligenz, in Unternehmerische Eigensynergie für Produktionstechnologien oder die Überwindung des starren Taylorismus, Aachen: Shaker Verlag, 2010, p. 118–121.
    [BibTex]
    @InCollection{TUW-194153,
    Title = {Verteilte Intelligenz},
    Author = {Zoitl, Alois and S{\"u}nder, Christoph},
    Booktitle = {Unternehmerische Eigensynergie f{\"u}r Produktionstechnologien oder die {\"U}berwindung des starren Taylorismus},
    Publisher = {Shaker Verlag},
    Year = {2010},
    Address = {Aachen},
    Pages = {118--121},
    ISBN = {978-3-8322-9632-2},
    }

2008

  • A. Zoitl, Real-Time Execution for IEC 61499, Durham, North Carolina: International Society of Automation, 2008.
    [BibTex]
    @Book{TUW-168709,
    Title = {Real-Time Execution for IEC 61499},
    Author = {Zoitl, Alois},
    Publisher = {International Society of Automation},
    Year = {2008},
    Address = {Durham, North Carolina},
    ISBN = {978-1-934394-27-4},
    Numpages = {276},
    }

2007

  • P. J. Thurner, E. Oroudjev, R. Jungmann, C. Kreutz, J. H. Kindt, G. Schitter, T. O. Okouneva, M. E. Lauer, G. E. Fantner, H. Hansma, and P. K. Hansma, Imaging of Bone Ultrastructure using Atomic Force Microscopy, in Modern Research and Educational Topics in Microscopy, Formatex Microscopy Book Series, 2007, p. 37–48.
    [BibTex]
    @InCollection{TUW-269328,
    Title = {Imaging of Bone Ultrastructure using Atomic Force Microscopy},
    Author = {Thurner, Philipp J. and Oroudjev, Emin and Jungmann, Ralf and Kreutz, C. and Kindt, J. H. and Schitter, Georg and Okouneva, T. O. and Lauer, M. E. and Fantner, G. E. and Hansma, Helen and Hansma, Paul K.},
    Booktitle = {Modern Research and Educational Topics in Microscopy},
    Publisher = {Formatex Microscopy Book Series},
    Year = {2007},
    Pages = {37--48},
    }